Double-Shelled Fe-Fe3C Nanoparticles Embedded on a Porous Carbon Framework for Superior Lithium-Ion Half/Full Batteries.

Cost-effective and environmentally friendly Fe-based active materials offer exceptionally high energy capacity in lithium-ion batteries (LIBs) due to their multiple electron redox reactions. However, challenges, such as morphology degradation during cycling, cell pulverization, and electrochemical stability, have hindered their widespread use. Herein, we demonstrated a simple salt-assisted freeze-drying method to design a double-shelled Fe/Fe3C core tightly anchored on a porous carbon framework (FEC). The shell consists of a thin Fe3O4 layer (≈2 nm) and a carbon layer (≈10 nm) on the outermost part. Benefiting from the complex nanostructuring (porous carbon support, core-shell nanoparticles, and Fe3C incorporation), the FEC anode delivered a high discharge capacity of 947 mAh g-1 at 50 mA g-1 and a fast-rate capability of 305 mAh g-1 at 10 A g-1. Notably, the FEC cell still showed 86% reversible capacity retention (794 mAh g-1 at 50 mA g-1) at a high cycling temperature of 80 °C, indicating superior structural integrity during cycling at extreme temperatures. Furthermore, we conducted a simple solid-state fluorination technique using the as-prepared FEC sample and excess NH4F to prepare iron fluoride-carbon composites (FeF2/C) as the positive electrode. The full cell configuration, consisting of the FEC anode and FeF2/C cathode, reached a remarkable capacity of 200 mAh g-1 at a 20 mA g-1 rate or an energy density of approximately 530 Wh kg-1. Thus, the straightforward and simple experimental design holds great potential as a revolutionary Fe-based cathodic-anodic pair candidate for high-energy LIBs.

Enhanced Energy Density in All-in-One Device Integrating Si Solar Cell and Supercapacitor Using [BMIm]Cl/PVA Gel Electrolyte.

All-in-one systems integrating solar cells and supercapacitors have recently received significant attention because of their high efficiency and portability. Unlike conventional solar photovoltaics, which require external wiring to connect to a battery for energy storage, integrated devices with solar cells and supercapacitors share one electrode, eliminating wiring resistance and facilitating charge transfer. In this work, we designed and fabricated all-in-one devices by combining a silicon solar cell and a supercapacitor with polymer gel electrolytes. Our all-in-one devices incorporating H3PO4/PVA and [BMIm]Cl/PVA exhibited areal capacitances of 452.5 and 550 mF·cm -2 at 0.1 mA·cm-2, respectively, following 100 s of photocharging. Notably, the [BMIm]Cl/PVA-based all-in-one device demonstrated significantly higher maximum energy density and power density compared to both the H3PO4/PVA-based all-in-one device and the values reported in literature. In addition, the cyclic photocharge/galvanostatic discharge process for the [BMIm]Cl/PVA-based all-in-one device represented consistent retention of areal capacitance, affirming its stability across charge-discharge cycles. After 100 s of photocharging, the [BMIm]Cl/PVA-based all-in-one device achieved a total energy efficiency of 1.85%, surpassing the 1.45% efficiency observed in the device using H3PO4/PVA. These results provide valuable insights for the design of self-charging all-in-one devices for portable and wearable applications.

Surface plasmon-enhanced solution-processed phosphorescent organic light-emitting diodes by incorporating gold nanoparticles.

Organic light-emitting diodes (OLEDs) have attracted increasing attention due to their superiority as high quality displays and energy-saving lighting. However, improving the efficiency of solution-processed devices especially based on blue emitter remains a challenge. Excitation of surface plasmons on metallic nanoparticles has potential for increasing the absorption and emission from optoelectronic devices. We demonstrate here that the incorporation of gold nano particles (GNPs) in the hole injection layer of poly(3,4-ethylene dioxythiophene):polystyrene sulfonic acid with an appropriate size and doping concentration can greatly enhance the efficiency OLED device especially at higher voltage. Apparently, the spectral of the multiple plasmon resonances of the GNPs and the luminescence of the emitting materials significantly overlap with each other. At 1000 cd m-2 for example, the power efficiency of a studied green device is increased from 29.0 to 36.2 lm W-1, an increment of 24.8%, and the maximum brightness improved from 21 550 to 27 810  cd m-2, an increment of 29.1%, as 2 wt% of a 12 nm GNP is incorporated. Remarkably, designed blue OLED also exhibited an increment of 50% and 35% in power efficacy at 100 and 1000 cd m-2, respectively, for same device structure. The reason why the enhancement is marked may be attributed to a strong absorption of the short-wavelength emission from the device by the gold nano particles, which in turn initiates a strong surface plasmon resonance effect, leading to a high device efficiency.