Exploring the biocompatibility and healing activity of actinobacterial-enhanced reduced nano-graphene oxide in in vitro and in vivo model and induce bone regeneration through modulation of OPG/RANKL/RUNX2/ALP pathways.

BACKGROUND: The development of cost-effective, simple, environment-friendly biographene is an area of interest. To accomplish environmentally safe, benign culturing that has advantages over other methods to reduce the graphene oxide (GO), extracellular metabolites from actinobacteria associated with mushrooms were used for the first time. METHODS: Bactericidal effect of GO against methicillin-resistant Staphylococcus aureus, antioxidant activity, and hydroxyapatite-like bone layer formation, gene expression analysis and appropriate biodegradation of the microbe-mediated synthesis of graphene was studied. RESULTS: Isolated extracellular contents Streptomyces achromogenes sub sp rubradiris reduced nano-GO to graphene (rGO), which was further examined by spectrometry and suggested an efficient conversion and significant reduction in the intensity of all oxygen-containing moieties and shifted crystalline peaks. Electron microscopic results also suggested the reduction of GO layer. In addition, absence of significant toxicity in MG-63 cell line, intentional free radical scavenging prowess, liver and kidney histopathology, and Wistar rat bone regeneration through modulation of OPG/RANKL/RUNX2/ALP pathways show the feasibility of the prepared nano GO. CONCLUSIONS: The study demonstrates the successful synthesis of biographene from actinobacterial extracellular metabolites, its potential biomedical applications, and its promising role in addressing health and environmental concerns.

Environmentally Friendly Water-Based Reduced Graphene Oxide/Cellulose Nanofiber Ink for Supercapacitor Electrode Applications.

The agglomeration of reduced graphene oxide (rGO) in water makes the development of rGO inks for supercapacitor printing challenging. Cellulose nanofiber (CNF), a biodegradable and renewable nanomaterial, can act as a nanospacer, preventing the agglomeration and restacking of rGO flakes. In this work, rGO/CNF films were fabricated using an environmentally friendly water-based rGO/CNF ink. In the absence of an additional binder/surfactant, the rGO/CNF films demonstrated remarkably enhanced hydrophilicity while retaining good electrical conductivity. The concentration of CNF was varied to observe the variation in the electrochemical performance. At a current density of 1 mA/cm2, the rGO/CNF-15 film exhibited a maximum areal capacitance of 98.61 mF/cm2, closely matching that of pure rGO films. Because of its excellent electrical performance, ease of manufacturing, and environmental friendliness, this water-based rGO/CNF ink may have promising applications in the printing of supercapacitor electrodes.

Facilitating Rapid Na+ Storage through MoWSe/C Heterostructure Construction and Synergistic Electrolyte Matching Strategy.

The realization of sodium-ion devices with high-power density and long-cycle capability is challenging due to the difficulties of carrier diffusion and electrode fragmentation in transition metal selenide anodes. Herein, a Mo/W-based metal-organic framework is constructed by a one-step method through rational selection, after which MoWSe/C heterostructures with large angles are synthesized by a facile selenization/carbonization strategy. Through physical characterization and theoretical calculations, the synthesized MoWSe/C electrode delivers obvious structural advantages and excellent electrochemical performance in an ethylene glycol dimethyl ether electrolyte. Furthermore, the electrochemical vehicle mechanism of ions in the electrolyte is systematically revealed through comparative analyses. Resultantly, ether-based electrolytes advantageously construct stable solid electrolyte interfaces and avoid electrolyte decomposition. Based on the above benefits, the Na half-cell assembled with MoWSe/C electrodes demonstrated excellent rate capability and a high specific capacity of 347.3 mA h g-1 even after cycling 2000 cycles at 10 A g-1. Meanwhile, the constructed sodium-ion capacitor maintains ∼80% capacity retention after 11,000 ultralong cycles at a high-power density of 3800 W kg-1. The findings can broaden the mechanistic understanding of conversion anodes in different electrolytes and provide a reference for the structural design of anodes with high capacity, fast kinetics, and long-cycle stability.

Enhanced Sodium Ion Batteries' Performance: Optimal Strategies on Electrolytes for Different Carbon-based Anodes.

Carbon-based materials have emerged as promising anodes for sodium-ion batteries (SIBs) due to the merits of cost-effectiveness and renewability. However, the unsatisfactory performance has hindered the commercialization of SIBs. During the past decades, tremendous attention has been put into enhancing the electrochemical performance of carbon-based anodes from the perspective of improving the compatibility of electrolytes and electrodes. Hence, a systematic summary of strategies for optimizing electrolytes between hard carbon, graphite, and other structural carbon anodes of SIBs is provided. The formulations and properties of electrolytes with solvents, salts, and additives added are comprehensively presented, which are closely related to the formation of solid electrolyte interface (SEI) and crucial to the sodium ion storage performance. Cost analysis of commonly used electrolytes has been provided as well. This review is anticipated to provide guidance in future rational tailoring of electrolytes with carbon-based anodes for sodium-ion batteries.

Prevalence of Antimicrobial-resistant Bacteria in HACCP Facilities.

Foodborne pathogens, such as Staphylococcus aureus and Salmonella spp., develop antimicrobial resistance (AMR) over time, resulting in compromised food safety. Therefore, this study aimed to determine the prevalence, compliance against Malaysia's veterinary standing procedure directive (APTVM 16 (c): 1/2011): Appendix 713), and antimicrobial resistance (AMR) profiles of S. aureus and Salmonella spp., in raw poultry meat, poultry meat products, and poultry-based ready-to-eat (RTE) foods. Here, 699 raw poultry meat and meat products samples were obtained from selected hazard analysis critical control points (HACCP)-certified poultry meat-processing plants. Additionally, 377 samples of poultry-based RTE meals were collected from dine-in establishments and hospital catering facilities in Klang Valley, Malaysia. Salmonella spp. and S. aureus were present in 2.1% and 2.8% of the analyzed samples, respectively. Salmonella spp isolated from raw poultry meat and its products displayed resistance to ampicillin (100%), chloramphenicol (87.0%), cefuroxime (60.9%), cefazolin (56.5%), and kanamycin (52.2%). Similarly, S. aureus isolated from raw poultry meat, its products, and poultry-based RTE foods exhibited resistance against tetracycline, chloramphenicol, penicillin, ciprofloxacin, trimethoprim, kanamycin, and cefoxitin. The multi-antibiotic resistance (MAR) demonstrated by these foodborne pathogens makes their prevalence disconcerting. This highlights the need for more stringent monitoring and enduring sanitary and hygiene practices in HACCP establishments to prevent foodborne infections and potential transmission of AMR bacteria.

Natural Solid-State Hydrogel Electrolytes Based on 3D Pure Cotton/Graphene for Supercapacitor Application.

A conductive cotton hydrogel with graphene and ions can come into contact with electrodes in solid electrolytes at the molecular level, leading to a more efficient electrochemical process in supercapacitors. The inherently soft nature of cotton mixed with hydrogel provides superior flexibility of the electrolyte, which benefits the devices in gaining high flexibility. Herein, we report on the current progress in solid-state hydrogel electrolytes based on 3D pure cotton/graphene and present an overview of the future direction of research. The ionic conductivity of a complex hydrogel significantly increased by up to 13.9 × 10-3 S/cm at 25 °C, due to the presence of graphene, which increases ionic conductivity by providing a smooth pathway for the transport of charge carriers and the polymer. Furthermore, the highest specific capacitance of 327 F/g at 3 mV/s was achieved with cyclic voltammetry measurement and a galvanostatic charge-discharge measurement showed a peak value of 385.4 F/g at 100 mA/g current density. Furthermore, an electrochemical analysis demonstrated that a composite cotton/graphene-based hydrogel electrolyte is electrically stable and could be used for the design of next-generation supercapacitors.

Highly Conductive and Reusable Cellulose Hydrogels for Supercapacitor Applications.

We report Na-Alginate-based hydrogels with high ionic conductivity and water content fabrication using poly (3,4-ethylene dioxythiophene) (PEDOT): poly (4-styrene sulfonic acid) (PSS) and a hydrogel matrix based on dimethyl sulfoxide (DMSO). DMSO was incorporated within the PEDOT:PSS hydrogel. A hydrogel with higher conductivity was created through the in-situ synthesis of intra-Na-Alginate, which was then improved upon by H2SO4 treatment. Field emission scanning electron microscopy (FESEM) was used to examine the surface morphology of the pure and synthetic hydrogel. Structural analysis was performed using Fourier-transform infrared spectroscopy (FTIR). Thermogravimetric analysis (TGA), which examines thermal properties, was also used. A specific capacitance of 312 F/g at 80 mV/s (energy density of 40.58 W/kg at a power density of 402.20 W/kg) at 100 DC mA/g was achieved by the symmetric Na-Alginate/PEDOT:PSS based flexible supercapacitor. The electrolyte achieved a higher ionic conductivity of 9.82 × 10-2 and 7.6 × 10-2 Scm-1 of Na-Alginate and a composite of Na-Alginate/PEDOT:PSS at 25 °C. Furthermore, the supercapacitor Na-Alginate/PEDOT:PSS//AC had excellent electrochemical stability by showing a capacity retention of 92.5% after 3000 continuous charge-discharge cycles at 10 mA current density. The Na- Alginate/PEDOT:PSS hydrogel displayed excellent flexibility and self-healing after re-contacting the two cut hydrogel samples of electrolyte for 90 min because of the dynamic cross-linking network efficiently dissipated energy. The illumination of a light-emitting diode (LED) verified the hydrogel's capacity for self-healing.

Novel same-metal three electrode system for cyclic voltammetry studies.

Conventional three-electrode systems used in electrochemical measurement demand time-consuming and maintenance intensive procedures to enable accurate and repeatable electrochemical measurements. Traditionally, different metal configurations are used to establish the electrochemical gradient required to acquire the redox activity, and vary between different electrochemical measurement platforms. However, in this work, we report using the same metal (gold) for the counter, working and reference electrodes fabricated on a miniaturized printed circuit board (PCB) for a much simpler design. Potassium ferricyanide, widely used as a redox probe for electrochemical characterization, was utilized to acquire cyclic voltametric profiles using both the printed circuit board-based gold-gold-gold three-electrode and conventional three-electrode systems (glassy carbon electrode or graphite foil as the working electrode, platinum wire as the counter electrode, and Ag/AgCl as the reference electrode). The results show that both types of electrode systems generated similar cyclic voltammograms within the same potential window (-0.5 to +0.7 V). However, the novel PCB-based same-metal three-electrode electrochemical cell only required a few activation cycles and exhibited impressive cyclic voltametric repeatability with higher redox sensitivity and detection window, while using only trace amounts of solutions/analytes.

Poly (Vinyl Alcohol)/Agar Hydrogel Electrolytes Based Flexible All-in-One Supercapacitors with Conducting Polyaniline/Polypyrrole Electrodes.

The major components of supercapacitor are electrodes and electrolytes which are fabricated using various materials and methods. Hydrogel is one such material that is used in supercapacitors as electrodes and electrolytes or both. Hydrogels are usually described as a soft and porous network of polymer materials that can swell in water because of the hydrophilic nature of its polymer chains, compriseng a 3D structure. It is well known that supercapacitors possess high-power density but low energy density. For enhancing energy density of these electrochemical cells and a boost in its electrochemical performance and specific capacity, binder free conducting polymer hydrogel electrodes have gained immense attention, especially polyaniline (PANI) and polypyrrole (PPy). Therefore, in this work, chemically crosslinked PVA/Agar hydrogel electrolytes have been prepared and employed. Agar has been added in PVA since it is environmentally friendly, biodegradable, and cost-effective natural polymer. Subsequently, the binder free polyaniline/polypyrrole electrodes were grown on the PVA/Agar hydrogel electrolytes to fabricate all-in-one flexible hydrogels. The synthesized hydrogels were characterized using X-ray diffraction (XRD) analysis, Fourier transform infrared (FTIR) analysis, Field emission scanning electron microscope (FESEM) and mechanical studies. Then, the all-in-one flexible supercapacitors were fabricated using the hydrogels. The electrochemical studies such cyclic voltammetry (CV), galvanic charge discharge (GCD), and electrochemical impedance spectroscopy (EIS) studies. The fabricated all-in-one lamination free supercapacitors showed promising results and by comparing all four samples, PAP2 where 5 mL of PVA was used in combination with 3 mL of Agar and 5 mL of PANI and PPy each, exhibited the highest areal capacitance of 750.13 mF/cm2, energy density of 103.02 µWh/cm2, and 497.22 µW/cm2 power density. The cyclic stability study revealed the 149% capacity retention after 15,000 cycles.

Modification of DSSC Based on Polymer Composite Gel Electrolyte with Copper Oxide Nanochain by Shape Effect.

Solvent evaporation and leakage of liquid electrolytes that restrict the practicality of dye-sensitized solar cells (DSSCs) motivate the quest for the development of stable and ionic conductive electrolyte. Gel polymer electrolyte (GPE) fits the criteria, but it still suffers from low efficiency due to insufficient segmental motion within the electrolytes. Therefore, incorporating metal oxide nanofiller is one of the approaches to enhance the performance of electrolytes due to the presence of cross-linking centers that can be coordinated with the polymer segments. In this research, polymer composite gel electrolytes (PCGEs) employing poly (vinyl butyral-co-vinyl alcohol-co-vinyl acetate) (P(VB-co-VA-co-VAc)) terpolymer as host polymer, tetrapropylammonium iodide (TPAI) as dopant salt, and copper oxide (CuO) nanoparticles as the nanofillers were produced. The CuO nanofillers were synthesized by sonochemical method and subsequently calcined at different temperatures (i.e., 200, 350, and 500 °C), denoted as CuO-200, CuO-350, and CuO-500, respectively. All CuO nanoparticles have different shapes and sizes that are connected in a chain which impact the amorphous phase and the roughness of the surface, proven by the structural and the morphological analyses. It was found that the PCGE consisting of CuO-350 exhibited the highest ionic conductivity of 2.54 mS cm-1 and apparent diffusion coefficient of triiodide of 1.537 × 10-4 cm2 s-1. The enhancement in the electrochemical performance of the PCGEs is correlated with the change in shape (rod to sphere) and size of CuO particles which disrupted the structural order of the polymer chain, facilitating the redox couple transportation. Additionally, a DSSC was fabricated and achieved the highest power conversion efficiency of 7.05% with JSC of 22.1 mA cm-2, VOC of 0.61 V, and FF of 52.4%.

Composite of medium-chain-length polyhydroxyalkanoates-co-methyl acrylate and carbon nanotubes as innovative electrodes modifier in microbial fuel cell.

A microbial fuel cell is a sustainable and environmental-friendly device that combines electricity generation and wastewater treatment through metabolic activities of microorganisms. However, low power output from inadequate electron transfer to the anode electrode hampers its practical implementation. Nanocomposites of oxidized carbon nanotubes and medium-chain-length polyhydroxyalkanoates (mcl-PHA) grafted with methyl acrylate monomers enhance the electrochemical function of electrodes in microbial fuel cell. Extensive polymerization of methyl acrylate monomers within mcl-PHA matrix, and homogenous dispersion of carbon nanotubes within the graft matrix are responsible for the enhancement. Modified electrodes exhibit high conductivities, better redox peak and reduction of cell internal resistance up to 76%. A stable voltage output at almost 700 mV running for 225 H generates maximum power and current density of 351 mW/m2 and 765 mA/m2 , respectively. Superior biofilm growth on modified surface is responsible for improved electron transfer to the anode hence stable and elevated power output generation.

Printed-Circuit-Board-Based Two-Electrode System for Electronic Characterization of Proteins.

Proteins have been increasingly suggested as suitable candidates for the fabrication of biological computers and other biomolecular-based electronic devices mainly due to their interesting structure-related intrinsic electrical properties. These natural biopolymers are environmentally friendly substitutes for conventional inorganic materials and find numerous applications in bioelectronics. Effective manipulation of protein biomolecules allows for accurate fabrication of nanoscaled device dimensions for miniaturized electronics. The prerequisite, however, demands an interrogation of its various electronic properties prior to understanding the complex charge transfer mechanisms in protein molecules, the knowledge of which will be crucial toward development of such nanodevices. One significantly preferred method in recent times involves the utilization of solid-state sensors where interactions of proteins could be investigated upon contact with metals such as gold. Therefore, in this work, proteins (hemoglobin and collagen) were integrated within a two-electrode system, and the resulting electronic profiles were investigated. Interestingly, structure-related electronic profiles representing semiconductive-like behaviors were observed. These characteristic electronic profiles arise from the metal (Au)-semiconductor (protein) junction, clearly demonstrating the formation of a Schottky junction. Further interpretation of the electronic behavior of proteins was done by the calculation of selected solid-state parameters. For example, the turn-on voltage of hemoglobin was measured to occur at a lower turn-on voltage, indicating the possible influence of the hem group present as a cofactor in each subunit of this tetrameric protein.

Enhancing the Efficiency of a Dye-Sensitized Solar Cell Based on a Metal Oxide Nanocomposite Gel Polymer Electrolyte.

To overcome the critical limitations of liquid-electrolyte-based dye-sensitized solar cells, quasi-solid-state electrolytes have been explored as a means of addressing long-term device stability, albeit with comparatively low ionic conductivities and device performances. Although metal oxide additives have been shown to augment ionic conductivity, their propensity to aggregate into large crystalline particles upon high-heat annealing hinders their full potential in quasi-solid-state electrolytes. In this work, sonochemical processing has been successfully applied to generate fine Co3O4 nanoparticles that are highly dispersible in a PAN:P(VP-co-VAc) polymer-blended gel electrolyte, even after calcination. An optimized nanocomposite gel polymer electrolyte containing 3 wt % sonicated Co3O4 nanoparticles (PVVA-3) delivers the highest ionic conductivity (4.62 × 10-3 S cm-1) of the series. This property is accompanied by a 51% enhancement in the apparent diffusion coefficient of triiodide versus both unmodified and unsonicated electrolyte samples. The dye-sensitized solar cell based on PVVA-3 displays a power conversion efficiency of 6.46% under AM1.5 G, 100 mW cm-2. By identifying the optimal loading of sonochemically processed nanoparticles, we are able to generate a homogenous extended particle network that effectively mobilizes redox-active species through a highly amorphous host matrix. This effect is manifested in a selective 51% enhancement in photocurrent density (JSC = 16.2 mA cm-2) and a lowered barrier to N719 dye regeneration (RCT = 193 Ω) versus an unmodified solar cell. To the best of our knowledge, this work represents the highest known efficiency to date for dye-sensitized solar cells based on a sonicated Co3O4-modified gel polymer electrolyte. Sonochemical processing, when applied in this manner, has the potential to make meaningful contributions toward the ongoing mission to achieve the widespread exploitation of stable and low-cost dye-sensitized solar cells.

A novel clinical test for assessing patellar cartilage changes and its correlation with magnetic resonance imaging and arthroscopy.

Controversy still exists regarding the best clinical assessment test for chondromalacia patellae (CMP). Our study aims to evaluate the specificity and sensitivity of a novel clinical test for CMP, the "Patella Slide Test" (PST) against the findings of magnetic resonance imaging (MRI) and arthroscopy. We included 221 consecutive patients planned for elective knee arthroscopic surgery. An MRI scan of the symptomatic knee was performed prior to surgery. On the day of surgery, each patient was examined using the PST followed by a knee arthroscopy to assess the quality of the chondral surfaces of the patellofemoral joint. The MRI and PST results were compared against the arthroscopic findings that served as the gold standard. The PST (0.89) was statistically more sensitive than MRI (0.67) in diagnosing CMP. The PST (0.89) also had a greater negative predictive value (NPV) than MRI (0.74). However, MRI (0.94) was more specific than the PST (0.85). The differences in accuracy and positive predictive value of the PST versus MRI were not statically significant. In conclusion, the PST shows high sensitivity and has a greater NPV than MRI as a clinical test for diagnosing CMP.

Development and characterization of poly(1-vinylpyrrolidone-co-vinyl acetate) copolymer based polymer electrolytes.

Gel polymer electrolytes (GPEs) are developed using poly(1-vinylpyrrolidone-co-vinyl acetate) [P(VP-co-VAc)] as the host polymer, lithium bis(trifluoromethane) sulfonimide [LiTFSI] as the lithium salt and ionic liquid, and 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl) imide [EMImTFSI] by using solution casting technique. The effect of ionic liquid on ionic conductivity is studied and the optimum ionic conductivity at room temperature is found to be 2.14 × 10(-6) S cm(-1) for sample containing 25 wt% of EMImTFSI. The temperature dependence of ionic conductivity from 303 K to 353 K exhibits Arrhenius plot behaviour. The thermal stability of the polymer electrolyte system is studied by using thermogravimetric analysis (TGA) while the structural and morphological properties of the polymer electrolyte is studied by using Fourier transform infrared (FTIR) spectroscopy and X-ray diffraction analysis (XRD), respectively.

Subacromial bursitis with giant rice bodies as initial presentation of rheumatoid arthritis.

Rice body formation is a nonspecific response to chronic synovial inflammation associated with tuberculous arthritis, rheumatoid arthritis, juvenile rheumatoid arthritis, seronegative inflammatory arthritis, and even osteoarthritis. Such bodies were termed rice bodies because of their close resemblance to grains of polished white rice. We present a case report of a middle-aged woman with right shoulder subacromial/subdeltoid bursitis with giant rice body formation as her initial presentation of rheumatoid arthritis. Her right shoulder symptoms resolved after subacromial and subdeltoid bursectomy and removal of the rice bodies. She subsequently developed inflammatory arthritis of other joints, met the criteria for rheumatoid arthritis, and has been treated medically.

Placental thickness & its correlation to gestational age & foetal growth parameters- a cross sectional ultrasonographic study.

BACKGROUND: The Gestational Age (GA) is frequently over or under estimated, as the conventional gestational estimation is based on the Last Menstrual Period (LMP) and on ultrasonography (USG). Many people are unaware of their LMP and irregular menstruations and USG is bound to have a bias, thereby posing difficulties in the GA estimation. AIM: This study was aimed at estimating the (Placental Thickness) PT and at investigating the relationship between PT and the foetal growth parameters in normal singleton pregnancies. MATERIALS AND METHODS: Two hundred eleven pregnant women were recruited in a cross sectional prospective study. The pregnancies were between 11 to 40 weeks and they were not complicated by either maternal or foetal diseases. The Biparietal Diameter (BPD), the Abdominal Circumference (AC), the Head Circumference (HC), the Femur Length (FL) and the PT were measured by USG by using a 3.5 MHz transducer. RESULTS: The maximum mean PT in the 1st, 2nd, 3rd and the combined trimesters were 16.5 mm, 23.78 mm, 35.81 mm and 28.49 mm respectively. The correlation between PT and the other foetal parameters was investigated by Pearson's correlation analysis. The values were expressed as mean + standard deviation. The statistical tests were two-tailed, with a p value of < 0.01, which indicated the statistical significance. There was a strong positive correlation between PT and GA, with the correlation coefficient values for the 1st, 2nd and 3rd trimesters being r = 0.609, r = 0.812 and r = 0.814 respectively. There was a significant positive correlation between PT and BPD, AC, FL, ABC, HC and FW also. The mathematical relationships between PT and GA, BPD, AC, FL, ABC, HC, FW were derived by regression analysis. The regression equation which was derived was (x - 22.92) = (0.3604) (w-27.86446) + (1.0256)(y-1.1678) + (0.0015)(z-216.2841) + (0.1047) (t-43.1555) + (0.027) (u.192.79000) + (0.0042) (v-60.3725), where x = GA in weeks, w = PT in mm, y = FW in kg, z = HC in mm, t = FL in mm, u = AC in mm and v = BPD in mm. CONCLUSION: We conclude that PT can be used as a predictor of the GA. The subnormal PT for the corresponding GA should be evaluated for any disease condition. So, the measurement of PT should therefore be carried out routinely during the obstetric USGs.