Circuit analogy unveiled the haemodynamic effects of the posterior cross vein in the wing vein networks.

We investigated the wing vein network topology in fruit flies and observed that the posterior cross vein (PCV) disrupts the symmetry of the entire network. The fluidic engineering function of this vein's disposition remains unexplored although the wing vein network is known to transport blood. We examined the fluid mechanical effects of the PCV's disposition on this blood-transporting network through numerical simulations involving the removal and rearrangement of the vein, avoiding impractical physical manipulation. We characterised the geometry of each wing membrane cell, a portion of the wing membrane surrounded by a group of veins, by determining the ratio of its surface area to the contact area with the veins. We considered this ratio in association with the flow velocities of seeping water from the blood within the veins to the membrane and evaporating water from the membrane, based on the mass conservation law. We observed that the division of a membrane cell by the PCV maximises the ratio of the areas in the divided cell on the wing-tip side by virtually shifting this vein's connections in our geometric membrane model. We derived blood flow rate and pressure loss within the venous network from their geometry, using an analogy of the venous network with a circuit consisting of hydraulic resistors based on Kirchhoff and Ohm's laws. The overall pressure loss in the network decreased by 20% with the presence of the PCV functioning as a paralleled hydraulic resistor. By contrast, any other cross-vein computationally arranged on another membrane cell as the PCV's substitution did not exhibit a larger reduction in the pressure loss. Overall, our numerical analyses, leveraging geometry and a circuit analogy, highlighted the effects of the PCV's presence and position on the blood-transporting vein network.

CD9 protects the sperm from cytotoxic factors in the epididymis as extracellular components.

The mechanism by which seemingly normal sperm cause infertility is still under debate. Although CD9 is expressed in male reproductive tissues, its role in male fertility remains unclear. To address this, we investigated the role of CD9 in analyzing Cd9 -deficient ( Cd9 -KO) male mice. The litter size of Cd9 -KO males was comparable, regardless of mating experience. When Cd9 -KO males experienced their first mating chance, a considerable number of neonates died 48 hours after birth. Electron microscopy reveals the presence of CD9 in the epididymal space. Our results suggest that CD9 contributes to male fertility as an extracellular component.

Application of Piezoelectric PLLA Braided Cord as Wearable Sensor to Realize Monitoring System for Indoor Dogs with Less Physical or Mental Stress.

We attempted to realize a prototype system that monitors the living condition of indoor dogs without physical or mental burden by using a piezoelectric poly-l-lactic acid (PLLA) braided cord as a wearable sensor. First, to achieve flexibility and durability of the piezoelectric PLLA braided cord used as a sensor for indoor dogs, the process of manufacturing the piezoelectric PLLA fiber for the piezoelectric braided cord was studied in detail and improved to achieve the required performance. Piezoelectric PLLA braided cords were fabricated from the developed PLLA fibers, and the finite element method was used to realize an e-textile that can effectively function as a monitoring sensor. As a result, we realized an e-textile that feels similar to a high-grade textile and senses the complex movements of indoor dogs without the use of a complex computer system. Finally, a prototype system was constructed and applied to an actual indoor dog to demonstrate the usefulness of the e-textile as a sensor for indoor dog monitoring.

Application of Braided Piezoelectric Poly-l-Lactic Acid Cord Sensor to Sleep Bruxism Detection System with Less Physical or Mental Stress.

For many years, we have been developing flexible sensors made of braided piezoelectric poly-l-lactic acid (PLLA) fibers that can be tied and untied for practical applications in society. To ensure good quality of sleep, the occurrence of bruxism has been attracting attention in recent years. Currently, there is a need for a system that can easily and accurately measure the frequency of bruxism at home. Therefore, taking advantage of the braided piezoelectric PLLA cord sensor's unique characteristic of being sewable, we aimed to provide a system that can measure the frequency of bruxism using the braided piezoelectric PLLA cord sensor simply sewn onto a bed sheet on which the subject lies down. After many tests using trial and error, the sheet sensor was completed with zigzag stitching. Twenty subjects slept overnight in a hospital room on sheets integrated with a braided piezoelectric PLLA cord. Polysomnography (PSG) was simultaneously performed on these subjects. The results showed that their bruxism could be detected with an accuracy of more than 95% compared with PSG measurements, which can only be performed in a hospital by a physician and are more burdensome for the subjects, with the subjects simply lying on the bed sheet with a braided piezoelectric PLLA cord sensor sewn into it.

A Prototype Sensor System Using Fabricated Piezoelectric Braided Cord for Work-Environment Measurement during Work from Home.

We proposed a new prototype sensor system to understand the workload of employees during telework. The goal of sensing using such a system is to index the degree of stress experienced by employees during work and recognize how to improve their work environment. Currently, to realize this, image processing technology with a Web camera is generally used for vital sign sensing. However, it creates a sense of discomfort at work because of a strong sense of surveillance. To truly evaluate a working environment, it is necessary that an employee be unaware of the sensor system and for the system to be as unobtrusive as possible. To overcome these practical barriers, we have developed a new removable piezoelectric sensor incorporated in a piezoelectric poly-L-lactic acid (PLLA) braided cord. This cord is soft and flexible, and it does not cause any discomfort when attached to the cushion cover sheet. Thus, it was possible to measure the workload of an employee working from home without the employee being aware of the presence of a sensor. Additionally, we developed a system for storing data in a cloud system. We succeeded in acquiring continuous long-term data on the vital signs of employees during telework using this system. The analysis of the data revealed a strong correlation between behavior and stress.

Domino C-F Bond Activation of the CF3 Group: Synthesis of Fluorinated Dibenzo[a,c][7]annulenes from 2-(Trifluoromethyl)-1-alkenes and 2,2'-Diceriobiaryls.

The construction of ring-fluorinated seven-membered carbocycles was readily achieved via the domino SN2'-type/SNV reaction between 2-(trifluoromethyl)-1-alkenes and 1,4-carbodianions. The SN2'-type reaction of 2-(trifluoromethyl)-1-alkenes with 2,2'-diceriobiaryls generated the intermediary 1,1-difluoro-1-alkenes bearing a monoceriobiaryl moiety, which in turn underwent intramolecular SNV reaction to afford fluorinated 5H-dibenzo[a,c][7]annulenes.

Platform for Ring-Fluorinated Benzoheterole Derivatives: Palladium-Catalyzed Regioselective 1,1-Difluoroallylation and Heck Cyclization.

The synthesis of difluoromethylene-containing heterocycles was achieved via the palladium-catalyzed 1,1-difluoroallylation of heteronucleophiles followed by intramolecular Heck reaction. The allylic substitution of 3-bromo-3,3-difluoropropene was regioselectively accomplished by heteronucleophiles without rearrangement to give the corresponding 1,1-difluoroallylated compounds whose Heck cyclization proceeded in a 5-exo manner to afford ring-difluorinated indolines and dihydrobenzofurans. Their defluorinative allylic substitution further provided 2-fluoroindoles and 2-fluorobenzofurans.

Two-step synthesis of difluoromethyl-substituted 2,3-dihydrobenzoheteroles.

3-Difluoromethylated 2,3-dihydrobenzoheteroles, 2,3-dihydrobenzofurans, 2,3-dihydrobenzothiophenes, and indolines were readily synthesized from ortho-heterosubstituted bromobenzenes, 2-bromophenols, 2-bromobenzenethiols, and 2-bromoanilines, respectively, in two steps: (1) γ-selective allylic substitution of 3-bromo-3,3-difluoropropene with heteronucleophiles and (2) intramolecular radical cyclization of the resulting 3,3-difluoroallylic compounds.