Potential of Commercial Wood-Based Materials as PCB Substrate.

In our research on sustainable solutions for printed electronics, we are moving towards renewable materials in applications, which can be very challenging from the performance perspective, such as printed circuit boards (PCB). In this article, we examine the potential suitability of wood-based materials, such as cardboard and veneer, as substrate materials for biodegradable solutions instead of the commonly used glass-fiber reinforced epoxy. Our substrate materials were coated with fire retardant materials for improved fire resistance and screen printed with conductive silver ink. The print quality, electrical conductivity, fire performance and biodegradation were evaluated. It was concluded that if the PCB application allows manufacturing using screen printing instead of an etching process, there is the potential for these materials to act as substrates in, e.g., environmental analytics applications.

Biomedical Diagnostics Enabled by Integrated Organic and Printed Electronics.

Organic and printed electronics integration has the potential to revolutionize many technologies, including biomedical diagnostics. This work demonstrates the successful integration of multiple printed electronic functionalities into a single device capable of the measurement of hydrogen peroxide and total cholesterol. The single-use device employed printed electrochemical sensors for hydrogen peroxide electroreduction integrated with printed electrochromic display and battery. The system was driven by a conventional electronic circuit designed to illustrate the complete integration of silicon integrated circuits via pick and place or using organic electronic circuits. The device was capable of measuring 8 µL samples of both hydrogen peroxide (0-5 mM, 2.72 × 10-6 A·mM-1) and total cholesterol in serum from 0 to 9 mM (1.34 × 10-8 A·mM-1, r2 = 0.99, RSD < 10%, n = 3), and the result was output on a semiquantitative linear bar display. The device could operate for 10 min via a printed battery, and display the result for many hours or days. A mobile phone "app" was also capable of reading the test result and transmitting this to a remote health care provider. Such a technology could allow improved management of conditions such as hypercholesterolemia.

Roll-to-roll printed resistive WORM memory on a flexible substrate.

The fabrication process and the operation characteristics of a fully roll-to-roll printed resistive write-once-read-many memory on a flexible substrate are presented. The low-voltage (<10 V) write operation of the memories from a high resistivity '0' state to a low resistivity '1' state is based on the rapid electrical sintering of bits containing silver nanoparticles. The bit ink is formulated by mixing two commercially available silver nanoparticle inks in order to tune the initial square resistance of the bits and to create a self-organized network of percolating paths. The electrical performance of the memories, including read and write characteristics, is described and the long-term stability of the less stable '0' state is studied in different environmental conditions. The memories can find use in low-cost mass printing applications.

Electrical sintering of nanoparticle structures.

A method for sintering nanoparticles by applying voltage is presented. This electrical sintering method is demonstrated using silver nanoparticle structures ink-jet-printed onto temperature-sensitive photopaper. The conductivity of the printed nanoparticle layer increases by more than five orders of magnitude during the sintering process, with the final conductivity reaching 3.7 × 10(7) S m(-1) at best. Due to a strong positive feedback induced by the voltage boundary condition, the process is very rapid-the major transition occurs within 2 µs. The best obtained conductivity is two orders of magnitude better than for the equivalent structures oven-sintered at the maximum tolerable temperature of the substrate. Additional key advantages of the method include the feasibility for patterning, systematic control of the final conductivity and in situ process monitoring. The method offers a generic tool for electrical functionalization of nanoparticle structures.