Prosomatostatin is proteolytically processed at the amino terminal segment by subtilase SKI-1.

Processing of prohormones to generate active products typically occurs at basic residues via cleavage by proprotein convertases. A less common type of cleavage is mediated at hydrophobic (L, V, F, N) or small amino acid (A, T, S) residues. Efforts to identify the proteinases responsible for processing precursors at their hydrophobic amino acids has led to the recent cloning of a new type-1 membrane-bound subtilase called SKI-1. The NH2-terminal region of prosomatostatin, previously shown to contain a sorting signal for the regulated secretory pathways, is processed to generate PSST[1-10]. The exact cleavage mechanism is unknown, but has been assumed to involve monobasic processing at Lys13 followed by carboxypeptidase trimming. We found that K13A mutation did not block PSST[1-10] production. Since the prosomatostatin sequence R8-Q9-F10-L11 \ qualifies as a potential SKI-1 substrate, using a vaccinia virus expression system along with HPLC and radioimmunoassays, we observed that overexpression of recombinant SKI-1 in COS-1 and HEK-293 cells significantly increased the production of PSST[1-10]. Additionally, in CHO cells lacking SKI-1, there was a significant reduction in PSST[1-10] production which could be increased upon SKI-1 stimulation. Mutagenesis studies showed that efficient processing of PSST to PSST[1-10] required the RXRXXL motif. However, this NH2-terminal cleavage was not a prerequisite for the formation of SST-14 and SST-28.

Cathepsins X and B display distinct activity profiles that can be exploited for inhibitor design.

The carboxypeptidase and endopeptidase activities of cathepsins X and B, as well as their inhibition by E-64 derivatives, have been investigated in detail and compared. The results clearly demonstrate that cathepsins X and B do not share similar activity profiles against substrates and inhibitors. Using quenched fluorogenic substrates, we show that cathepsin X preferentially cleaves substrates through a monopeptidyl carboxypeptidase pathway, while cathepsin B displays a preference for the dipeptidyl pathway. The preference for one or the other pathway is about the same for both enzymes, i. e. approximately 2 orders of magnitude. Cleavage of a C-terminal dipeptide of a substrate by cathepsin X can be observed under conditions that preclude efficient monopeptidyl carboxypeptidase activity. In addition, an inhibitor designed to exploit the unique structural features responsible for the carboxypeptidase activity of cathepsin X has been synthesized and tested against cathepsins X, B and L. Although of moderate potency, this E-64 derivative is the first reported example of a cathepsin X-specific inhibitor. By comparison, CA074 was found to inactivate cathepsin B at least 34000-fold more efficiently than cathepsin X.

Modeling of the bacterial luciferase-flavin mononucleotide complex combining flexible docking with structure-activity data.

Although the crystal structure of Vibrio harveyi luciferase has been elucidated, the binding sites for the flavin mononucleotide and fatty aldehyde substrates are still unknown. The determined location of the phosphate-binding site close to Arg 107 on the alpha subunit of luciferase is supported here by point mutagenesis. This information, together with previous structure-activity data for the length of the linker connecting the phosphate group to the isoalloxazine ring represent important characteristics of the luciferase-bound conformation of the flavin mononucleotide. A model of the luciferase-flavin complex is developed here using flexible docking supplemented by these structural constraints. The location of the phosphate moiety was used as the anchor in a flexible docking procedure performed by conformation search by using the Monte Carlo minimization approach. The resulting databases of energy-ranked feasible conformations of the luciferase complexes with flavin mononucleotide, omega-phosphopentylflavin, omega-phosphobutylflavin, and omega-phosphopropylflavin were filtered according to the structure-activity profile of these analogs. A unique model was sought not only on energetic criteria but also on the geometric requirement that the isoalloxazine ring of the active flavin analogs must assume a common orientation in the luciferase-binding site, an orientation that is also inaccessible to the inactive flavin analog. The resulting model of the bacterial luciferase-flavin mononucleotide complex is consistent with the experimental data available in the literature. Specifically, the isoalloxazine ring of the flavin mononucleotide interacts with the Ala 74-Ala 75 cis-peptide bond as well as with the Cys 106 side chain in the alpha subunit of luciferase. The model of the binary complex reveals a distinct cavity suitable for aldehyde binding adjacent to the isoalloxazine ring and flanked by other key residues (His 44 and Trp 250) implicated in the active site.

A conserved alpha-helix at the amino terminus of prosomatostatin serves as a sorting signal for the regulated secretory pathway.

Mammalian prosomatostatin (PSST) contains the bioactive peptides SST-14 and SST-28 at the COOH-terminal end of the molecule and a putative sorting signal in the propeptide segment for targeting the precursor to the regulated secretory pathway. The NH(2)-terminal segment of PSST consists of an amphipathic alpha-helix, which has been totally conserved throughout vertebrate evolution. We have analyzed the PSST-(3--15) region for sorting function by alanine scanning and deletional mutagenesis. Mutants created were stably expressed in AtT-20 cells. Regulated secretion was studied by analyzing basal and stimulated release of SST-14 LI and by immunocytochemistry for staining of SST-14 LI in punctate granules. Deletion of the PSST-(3--15) segment blocked regulated secretion and rerouted PSST for constitutive secretion as unprocessed precursor. Alanine scanning mutagenesis identified the region Pro(5)--Gln(12) as being important in precursor targeting, with Leu(7) and Leu(11) being critical. Molecular modeling demonstrated that these two residues are located in close proximity on a hydrophobic surface of the alpha-helix. Disruption of the alpha-helix did not impair the ability of PSST to be processed at the COOH terminus to SST-14 and SST-28. Processing, however, was shifted to the early compartments of the secretory pathway rather than storage granules and was relatively inefficient.

Cathepsins X and B can be differentiated through their respective mono- and dipeptidyl carboxypeptidase activities.

Several new cysteine proteases of the papain family have been discovered in the past few years. To help in the assignment of physiological roles and in the design of specific inhibitors, a clear picture of the specificities of these enzymes is needed. One of these novel enzymes, cathepsin X, displays a unique specificity, cleaving single amino acid residues at the C-terminus of substrates very efficiently. In this study, the carboxypeptidase activities and substrate specificity of cathepsins X and B have been investigated in detail and compared. Using quenched fluorogenic substrates and HPLC measurements, it was shown that cathepsin X preferentially cleaves substrates through a monopeptidyl carboxypeptidase pathway, while cathepsin B displays a preference for the dipeptidyl pathway. The preference for one or the other pathway is about the same for both enzymes, i.e., approximately 2 orders of magnitude, a result supported by molecular modeling of enzyme-substrate complexes. Cleavage of a C-terminal dipeptide of a substrate by cathepsin X can become more important under conditions that preclude efficient monopeptidyl carboxypeptidase activity, e.g., nonoptimal interactions in subsites S(2)-S(1). These results confirm that cathepsin X is designed to function as a monopeptidyl carboxypeptidase. Contrary to a recent report [Klemencic, I., et al. (2000) Eur. J. Biochem. 267, 5404-5412], it is shown that cathepsins X and B do not share similar activity profiles, and that reagents are available to clearly distinguish the two enzymes. In particular, CA074 was found to inactivate cathepsin B at least 34000-fold more efficiently than cathepsin X. The insights obtained from this and previous studies have been used to produce an inhibitor designed to exploit the unique structural features responsible for the carboxypeptidase activity of cathepsin X. Although of moderate potency, this E-64 derivative is the first reported example of a cathepsin X-specific inhibitor.

The crystal structure of the formiminotransferase domain of formiminotransferase-cyclodeaminase: implications for substrate channeling in a bifunctional enzyme.

BACKGROUND: The bifunctional enzyme formiminotransferase-cyclodeaminase (FTCD) contains two active sites at different positions on the protein structure. The enzyme binds a gamma-linked polyglutamylated form of the tetrahydrofolate substrate and channels the product of the transferase reaction from the transferase active site to the cyclodeaminase active site. Structural studies of this bifunctional enzyme and its monofunctional domains will provide insight into the mechanism of substrate channeling and the two catalytic reactions. RESULTS: The crystal structure of the formiminotransferase (FT) domain of FTCD has been determined in the presence of a product analog, folinic acid. The overall structure shows that the FT domain comprises two subdomains that adopt a novel alpha/beta fold. Inspection of the folinic acid binding site reveals an electrostatic tunnel traversing the width of the molecule. The distribution of charged residues in the tunnel provides insight into the possible mode of substrate binding and channeling. The electron density reveals that the non-natural stereoisomer, (6R)-folinic acid, binds to the protein; this observation suggests a mechanism for product release. In addition, a single molecule of glycerol is bound to the enzyme and indicates a putative binding site for formiminoglutamate. CONCLUSIONS: The structure of the FT domain in the presence of folinic acid reveals a possible novel mechanism for substrate channeling. The position of the folinic acid and a bound glycerol molecule near to the sidechain of His82 suggests that this residue may act as the catalytic base required for the formiminotransferase mechanism.

Human cathepsin X: A cysteine protease with unique carboxypeptidase activity.

Cathepsin X is a novel cysteine protease which was identified recently from the EST (expressed sequence tags) database. In a homology model of the mature cathepsin X, a unique three residue insertion between the Gln22 of the oxyanion hole and the active site Cys31 was found to be located in the primed region of the binding cleft as part of a surface loop corresponding to residues His23 to Tyr27, which we have termed the "mini-loop". From the model, it became apparent that this distinctive structural feature might confer exopeptidase activity to the enzyme. To verify this hypothesis, human procathepsin X was expressed in Pichia pastoris and converted to mature cathepsin X using small amounts of human cathepsin L. Cathepsin X was found to display excellent carboxypeptidase activity against the substrate Abz-FRF(4NO(2)), with a k(cat)/K(M) value of 1.23 x 10(5) M(-)(1) s(-)(1) at the optimal pH of 5.0. However, the activity of cathepsin X against the substrates Cbz-FR-MCA and Abz-AFRSAAQ-EDDnp was found to be extremely low, with k(cat)/K(M) values lower than 70 M(-)(1) s(-)(1). Therefore, cathepsin X displays a stricter exopeptidase activity than cathepsin B. No inhibition of cathepsin X by cystatin C could be detected up to a concentration of 4 microM of inhibitor. From a model of the protease complexed with Cbz-FRF, the bound carboxypeptidase substrate is predicted to establish a number of favorable contacts within the cathepsin X binding site, in particular with residues His23 and Tyr27 from the mini-loop. The presence of the mini-loop restricts the accessibility of cystatin C as well as of the endopeptidase and MCA substrates in the primed subsites of the protease. The marked structural and functional differences of cathepsin X relative to other members of the papain family of cysteine proteases will be of great value in designing specific inhibitors useful as research tools to investigate the physiological and potential pathological roles of this novel enzyme.

Mapping of putative binding sites on the ectodomain of the type II TGF-beta receptor by scanning-deletion mutagenesis and knowledge-based modeling.

Binding surfaces of the type II transforming growth factor (TGF)-beta receptor extracellular domain (TbetaRII-ECD) are mapped by combining scanning-deletion mutagenesis results with knowledge-based modeling of the ectodomain structure. Of the 17 deletion mutants produced within the core binding domain of TbetaRII-ECD, only three retained binding to TGF-beta. Comparative modeling based on the crystal structure of the activin type II receptor extracellular domain (ActRII-ECD) indicates that the TbetaRII mutants which retain TGF-beta binding are deleted in some of the loops connecting the beta-strands in the TbetaRII-ECD model. Interpretation of the mutagenesis data within the structural framework of the ectodomain model allows for the prediction of potential binding sites at the surface of TbetaRII-ECD.

Full-length cDNA of human cathepsin F predicts the presence of a cystatin domain at the N-terminus of the cysteine protease zymogen.

A novel human cDNA encoding a cysteine protease of the papain family named cathepsin F is reported. The mature part of the predicted protease precursor displays between 26% and 42% identity to other human cysteine proteases while the proregion is unique by means of length and sequence. The very long proregion of the cathepsin F precursor (251 amino acid residues) can be divided into three regions: a C-terminal domain similar to the pro-segment of cathepsin L-like enzymes, a 50 residue flexible linker peptide, and an N-terminal domain predicted to adopt a cystatin-like fold. Cathepsin F would therefore be the first cysteine protease zymogen containing a cystatin-like domain.

MTD-ADJ: a multiconformational minimal topologic difference for determining bioactive conformers using adjusted biological activities.

The active conformation is part of a conformational mixture with experimental activity Yexp, and is used in QSAR studies to extract more information regarding the ligand-receptor interaction. To reflect the relative amount (alpha) of the active conformation, we adjust Yexp: Yadj = Yexp - log alpha. We establish a quantitative structure-activity relationship (QSAR) between Yadj and 3D conformational characteristics for the acetylcholinesterase (AChE) hydrolysis rates of 25 acetic esters. The 3D-QSAR model was obtained using the adjusted multiconformational minimal steric/topologic difference (MTD-ADJ) method, optimizing the receptor map based on Yadj for each conformer. Yadj was updated during each step of the optimization process. alpha and Yadj are based on the Boltzmann distribution calculated using AMI (MOPAC 6.0) relative energies of the COSMIC 90 derived conformers. The MTD-ADJ results are: (i) the 3D-QSAR models obtained by this procedure have significant statistical parameters and are similar to the unadjusted (MTD-MC, using Yexp) models; (ii) the selected bioactive conformations are extended, occupy cavity vertices and, for the same structures, have the same MTD value; and (iii) the optimized conformational map of the neutral ligands obtained from the MTD-ADJ model fits well in the active site of the crystallographic structure of AChE (from Torpedo californica). We propose a neutral ligands binding site model for AChE. Our results show that MTD-ADJ, which can be implemented in any 3D-QSAR method, is capable of providing additional information regarding the active conformations, and can be used to gain further insight into the ligand-receptor models for which no structural data are available.

Nonpolar interactions of thrombin S' subsites with its bivalent inhibitor: methyl scan of the inhibitor linker.

We have designed bivalent thrombin inhibitors, consisting of a nonsubstrate type active site blocking segment, a hirudin-based fibrinogen recognition exosite blocking segment, and a linker connecting these segments. The inhibition provided by the bivalent inhibitors with various linker lengths revealed that a minimum of 15 atoms was required for simultaneous binding of the two blocking segments of the inhibitor to thrombin without significant distortion. The crystal structure of the inhibitors with a 16-atom linker showed some conformational flexibility in the linker portion which still lies deep in the groove joining the active site and the fibrinogen recognition exosite. Since the thrombin S' subsites are not well characterized, we designed a new strategy to search for possible nonpolar interactions between the linker and the thrombin S' subsites. This strategy, the "methyl scan", is based on the incorporation of a methyl side chain at each atom position of the linker by using sarcosine, D,L-alanine, D,L-3-aminoisobutyric acid, or N-methyl-beta-alanine. The methyl groups on the second and the eighth atom positions of the linker, which correspond to the side chains of the P1' and the P3' residues, respectively, improved the affinity of the inhibitors significantly. Further study of the stereospecificity showed that L-Ala at the P1' residue and D-Ala at the P3' residue preferably improved the affinity of the inhibitors 20- and 25-fold, respectively. Molecular modeling calculations using a methyl probe were also carried out to identify favorable nonpolar interacting sites on the thrombin surface. Two sites were identified in the vicinity of the P1' and the P3' residues, supporting the validity of the methyl scan method. Thus, this study has improved our understanding of the interactions taking place in this groove. In particular, we have been able to show that some specific structural features, such as hydrophobic complementarity between the linker and the thrombin S' subsites, could be exploited and make these inhibitors trivalent.

Molecular aspects concerning antigen oligopeptide selection by MHC class I molecules.

T cells can recognize the antigen only if it is associated with self MHC molecules on the surface of antigen presenting cells (APC). There are several characteristic parameters defining interaction of MHC molecule with antigenic peptides giving circumstances for specific antigen presentation and an individualized immune response. Here are assessed some size and conformational parameters of the peptides presented by MHC class I molecules-lengths, widths, van der Waals volumes and surfaces-using COSMIC 2.0 software. The peptides derived from HIV gp 160 are obtained from literature and are known to be active and inactive in a cytotoxicity assay. An increased tendency for beta- or beta-like structures and volumes close to those of the MHC binding site are encountered in the case of active peptides.