Fused Deposition Modelling of Polymer Composite: A Progress.

Additive manufacturing (AM) highlights developing complex and efficient parts for various uses. Fused deposition modelling (FDM) is the most frequent fabrication procedure used to make polymer products. Although it is widely used, due to its low characteristics, such as weak mechanical properties and poor surface, the types of polymer material that may be produced are limited, affecting the structural applications of FDM. Therefore, the FDM process utilises the polymer composition to produce a better physical product. The review's objective is to systematically document all critical information on FDMed-polymer composite processing, specifically for part fabrication. The review covers the published works on the FDMed-polymer composite from 2011 to 2021 based on our systematic literature review of more than 150 high-impact related research articles. The base and filler material used, and the process parameters including layer height, nozzle temperature, bed temperature, and screw type are also discussed in this review. FDM is utilised in various biomedical, automotive, and other manufacturing industries. This study is expected to be one of the essential pit-stops for future related works in the FDMed-polymeric composite study.

Staphylococcal aureus bacteraemia: Clinical characteristic & evaluation of Prolex Staph Xtra latex agglutination test in the rapid identification of Staphylococcus aureus.

BACKGROUND: Staphylococcus aureus is a leading cause of community as well as healthcare-associated bacteraemia. This study aimed to describe clinical characteristics of S. aureus bacteraemia (SAB) and to evaluate the performance of the Prolex Staph Xtra Latex agglutination test in the identification of Staphylococcus aureus. METHODS: Cross-sectional study was conducted from Jun 2018 to May 2019. Isolates from first-positive peripheral blood cultures were tested with Prolex Staph Xtra Latex agglutination test, together with routine tube coagulase and DNase test. All isolates were further confirmed with Vitek2 GP. RESULTS: Hundred isolates were tested with Prolex Staph Xtra Latex. Twelve isolates were excluded due to incomplete medical records. Eighty-eight isolates were analysed, yielded sensitivities, specificities, positive and negative predictive values of 100%, 91.7%, 98.7%, and 100%, respectively. Of these, 76 were identified as S. aureus and 12 CoNS. Seventy-six patients were included in the SAB analysis. Fifty-nine out of 76 (78.6%) had underlying comorbidities. Thirty-four percent of the episodes were considered as primary SAB. Skin and soft tissue infection were accounted for the highest source of bacteraemia, 24(31.6%). Both MRSA and MSSA bacteraemia were seen mostly among healthcare-associated bacteraemia (HCA) (7/16, 43.8% and 28/60, 46.7%). Liver cirrhosis was significantly associated with MRSA bacteraemia (P=0.048). Metastatic infection & complicated SAB were identified in 13(17.1%) and 30(39.5%) of cases, respectively. All-cause mortality was 22.4%. CONCLUSION: S. aureus bacteraemia is a serious infection associated with significant metastatic complications and mortality. Prolex Staph Xtra Latex agglutination test has excellent sensitivity and specificity with 100% and 91.7% respectively.

The reliability of a rapid molecular detection method in determining the prevalence of rifampicin-resistant Mycobacterium tuberculosis in an urban district health facility in Malaysia.

INTRODUCTION: Rifampicin is a key first-line antimycobacterial agent employed for the treatment of pulmonary tuberculosis (PTB). This study sought to obtain prevalence data on rifampicin-resistant Mycobacterium tuberculosis among smear-positive PTB patients in the Klang District of Malaysia. MATERIALS AND METHODS: A total of 103 patients from the Chest Clinic of Hospital Tengku Ampuan Rahimah with sputum smears positive for acid-fast bacilli were included in this cross-sectional study. All sputa were tested using Xpert MTB/RIF to confirm the presence of M. tuberculosis complex and detect rifampicin resistance. Sputa were also sent to a respiratory medicine institute for mycobacterial culture. Positive cultures were then submitted to a reference laboratory, where isolates identified as M. tuberculosis complex underwent drug susceptibility testing (DST). RESULTS: A total of 58 (56.3%) patients were newly diagnosed and 45 (43.7%) patients were previously treated. Xpert MTB/RIF was able to detect rifampicin resistance with a sensitivity and specificity of 87.5% and 98.9%, respectively. Assuming that a single resistant result from Xpert MTB/RIF or any DST method was sufficient to denote resistance, a total of 8/103 patients had rifampicinresistant M. tuberculosis. All eight patients were previously treated for PTB (p<0.05). The overall prevalence of rifampicin resistance among smear-positive PTB patients was 7.8%, although it was 17.8% among the previously treated ones. CONCLUSION: The local prevalence of rifampicin-resistant M. tuberculosis was particularly high among previously treated patients. Xpert MTB/RIF can be employed in urban district health facilities not only to diagnose PTB in smear-positive patients, but also to detect rifampicin resistance with good sensitivity and specificity.

Molecular detection of Enterobacteriaceae isolates producing blaOXA-48 and blaOXA-181 genes: A single centre study.

INTRODUCTION: OXA-48, a carbapenem-hydrolysing class D ß-lactamase, and its variant, OXA-181, are increasingly reported worldwide. This study aimed to describe the prevalence and distribution of OXA-48 and OXA-181 carbapenem-resistant Enterobacteriaceae (CRE) in a tertiary medical centre in Malaysia. MATERIALS & METHODS: A total of 13,098 Enterobacteriaceae isolates from various clinical samples were sent to our laboratory between January 2011 and December 2012. Of these, 90 demonstrated reduced susceptibility to at least one carbapenem and were included in this study. Only 88 isolates were successfully subcultured on blood agar (BA). Another 2 isolates failed to grow and were excluded. Of the 88, 2 isolates had the same identification number (repetitive isolates); therefore, 1 isolate was excluded from further analyses. Only 87 isolates were subjected to molecular detection of the blaOXA-48 and blaOXA-181 genes by polymerase chain reaction. RESULTS: Eighty-seven non-repetitive isolates grew following subculture on BA. Of these, 9 (10.34%) were positive for OXA-48 (7 Klebsiella pneumoniae, 2 Escherichia coli). Each isolate originated from different patients. All patients had a history of treatment with at least one cephalosporin and/or carbapenem prior to the isolation of OXA-48 CRE. OXA-181 was detected in one (1.15%) out of the 87 isolates; CONCLUSIONS: The prevalence of OXA-48 and OXA-181 CRE among all Enterobacteriaceae isolates in our institution is 0.069% and 0.008%, respectively. Nevertheless, our findings suggest that OXA-48 and OXA-181 carbapenemases appear to be important and possibly under-recognised causes of carbapenem resistance in Malaysia.

Cellulitis: An unusual manifestation of Neisseria meningitidis infection.

INTRODUCTION: Neisseria meningitidis infections often cause severe meningitis as well as bacteraemia. However, cellulitis in meningococcal diseases have rarely been described. Here, we report a case of right lower limb cellulitis caused by N. meningitidis. CASE REPORT: A 69-year-old woman presented with fever and lower limb swelling. She had diabetes mellitus, hypertension, dyslipidaemia and a history of surgical resection of vulvar carcinoma. N. meningitidis was isolated from her blood culture. DISCUSSION: This report provides additional evidence in support of N. meningitidis as a cause of cellulitis.

A review of biocompatible metal injection moulding process parameters for biomedical applications.

Biocompatible metals have been revolutionizing the biomedical field, predominantly in human implant applications, where these metals widely used as a substitute to or as function restoration of degenerated tissues or organs. Powder metallurgy techniques, in specific the metal injection moulding (MIM) process, have been employed for the fabrication of controlled porous structures used for dental and orthopaedic surgical implants. The porous metal implant allows bony tissue ingrowth on the implant surface, thereby enhancing fixation and recovery. This paper elaborates a systematic classification of various biocompatible metals from the aspect of MIM process as used in medical industries. In this study, three biocompatible metals are reviewed-stainless steels, cobalt alloys, and titanium alloys. The applications of MIM technology in biomedicine focusing primarily on the MIM process setting parameters discussed thoroughly. This paper should be of value to investigators who are interested in state of the art of metal powder metallurgy, particularly the MIM technology for biocompatible metal implant design and development.