Preparation of SO4(2-)/TiO2-La2O3 solid superacid and its catalytic activities in acetalation and ketalation.

SO(4)(2-)/TiO(2)-La(2)O(3), a novel solid superacid, was prepared and its catalytic activities at different synthetic conditions are discussed with esterification of n-butanoic acid and n-butyl alcohol as probing reaction. The optimum conditions have also been found, mole ratio of n(La(3+)):n(Ti(4+)) is 1:34, the soaked consistency of H(2)SO(4) is 0.8 mol/L, the soaked time of H(2)SO(4) is 24 h, the calcining temperature is 480 degrees C, the calcining time is 3 h. Then it was applied in the catalytic synthesis of ten important ketals and acetals as catalyst and revealed high catalytic activity. Under these conditions on which the molar ratio of aldehyde/ketone to glycol is 1:1.5, the mass ratio of the catalyst used in the reactants is 0.5%, and the reaction time is 1.0 h, the yields of ketals and acetals can reach 41.4%-95.8%.

Synthesis of acetals and ketals catalyzed by tungstosilicic acid supported on active carbon.

Catalytic activity of activated carbon supported tungstosilicic acid in synthesizing 2-methyl-2-ethoxycarbonylmethyl- 1,3-dioxolane, 2,4-dimethyl-2-ethoxycarbonylmethyl-1,3-dioxolane, cyclohexanone ethylene ketal, cyclohexanone 1,2-propa- nediol ketal, butanone ethylene ketal, butanone 1,2-propanediol ketal, 2-phenyl-1,3-dioxolane, 4-methyl-2-phenyl-1,3-dioxolane, 2-propyl-1,3-dioxolane, 4-methyl-2-propyl-1,3-dioxolane was reported. It has been demonstrated that activated carbon supported tungstosilicic acid is an excellent catalyst. Various factors involved in these reactions were investigated. The optimum conditions found were: molar ratio of aldehyde/ketone to glycol is 1/1.5, mass ratio of the catalyst used to the reactants is 1.0%, and reaction time is 1.0 h. Under these conditions, the yield of 2-methyl-2-ethoxycarbonylmethyl-1,3-dioxolane is 61.5%, of 2,4-dimethyl- 2-ethoxycarbonylmethyl-1,3-dioxolane is 69.1%, of cyclohexanone ethylene ketal is 74.6%, of cyclohexanone 1,2-propanediol ketal is 80.1%, of butanone ethylene ketal is 69.5%, of butanone 1,2-propanediol ketal is 78.5%, of 2-phenyl-1,3-dioxolane is 56.7%, of 4-methyl-2-phenyl-1,3-dioxolane is 86.2%, of 2-propyl-1,3-dioxolane is 87.5%, of 4-methyl-2-propyl-1,3-dioxolane is 87.9%.

[Rheological phase synthesis and characterization of lanthanum salicylate and luminescence properties of Tb3+ -doped lanthanum salicylate].

Lanthanum salicylate and Tb3+ -doped lanthanum salicylate were synthesized with the rheological phase reaction method. Elemental analysis, IR, TG, DTA and powder X-ray diffraction were investigated to determine the composition, crystal structure and coordination manner between the COO- and ion La3+ of lanthanum salicylate. The emission and excitation spectra of Tb3+ -doped lanthanum salicylate were also discussed. Powder X-ray diffraction suggests that the compound has a layered monoclinic structure, and the lattice parameters are a = 21.6010 A, b = 13.8015 A , c = 3.8103 A, beta = 97.11 degrees, V = 1127.2 A3, Z = 2, rhocal = 1.621 g x cm(-3) and rhoexp = 1.653 g x cm(-3). The Tb3+ -doped lanthanum salicylate exhibits very strong green luminescence of Tb3+ under the excitation of UV light. And the transition from 5D4 to 7F5 is the strongest one.

[Catalytic application of synthesizing n-butyl acrylate by a new type nanometer complex heteropoly acid catalyst H3PW12O40/SiO2].

A new nanometer complex heteropoly acid with Keggin structure, H3PW12O40/SiO2, were prepared by sol-gel method, and were characterized with IR, UV, XRD and TEM techniques. By means of this nanometer catalytic materials, the optimum conditions of the n-butyl acrylate synthesis have been studied. The results show that the complex heteropoly acid H3PW12O40/SiO2 nanoparticles have the mean grain size of 40 nm and they are typical amorphous. A strong chemical interaction exists between H3PW12O40 and silica surface. The nanoparticles have high catalytic activity for synthesizing n-butyl acrylate. The optimum catalytic conditions are as follows: the mole ratio of acrylic acid and n-butyl alcohol is 1:1.2, the reaction temperature is approximately 90-96 degrees C, and the catalyst quantity in the reaction is 10% of the acid mass. The conversion proportion is 94.37% and product yield 91.2% in 5 h. Apparently, the unique structure of the Keggin anions and surface acid center and the high specific surface area and the pseudoliquid phase of H3PW12O40/SiO2 play an important role in the esterification reactions with the acid catalyst.

[Research on IR spectra of Li-Mn spinel].

The infrared spectra of Li-Mn-spinel were studied in this paper. As the structure of Li-Mn-spinel was classified as Fd3m space group, the lithium ions (Li(I)) occupy tetrahedral sites (8a sites) and manganese ions (Mn(IV) or Mn(III)) occupy octahedral sites (16d sites). The internal relationship between vibration modes and infrared activity was discussed based on the knowledge of group theory. The experimental IR spectra of Li-Mn-spinel were presented also. By theoretical analysis, we concluded that the bands at 618.6 and 501.5 cm-1 resulted from anti-symmetric stretching vibration of Mn(IV)-O and Mn (III)-O in Li-Mn-spinel crystal (Mn(IV)O6 and Mn(III)O6 octahedron), respectively, the weak band at 1,124 cm-1 resulted from anti-symmetric stretching vibration of Li-O in the spinel (LiO4 tetrahedron), and other possible bands at wave number lower than 400 cm-1 were not detected in the range from 400 to 4,000 cm-1. The reliability of conclusions was proved by IR spectra of both the Li-Mn-spinel and doped Li-Mn-spinel.