Your browser doesn't support javascript.
loading
Show: 20 | 50 | 100
Results 1 - 20 de 40
Filter
1.
Opt Lett ; 49(2): 318-321, 2024 Jan 15.
Article in English | MEDLINE | ID: mdl-38194558

ABSTRACT

Multi-focusing of light is a crucial capability for photonic devices that can be effectively achieved by precisely modulating the phase delay on the incident wavefront. However, integrating functional structures into optical fibers for remote light focusing remains challenging due to the complex device design and limited fabrication approaches. Here, we present the design and fabrication of metalens array on the end-face of a tailored single-mode step-index fiber for focusing light field into closely packed focal spot array. The metalenses are configured based on the fractional Talbot effect and benefit a modular design capability. Light passing through the optical fiber can be focused into different focal planes. With a synergistic 3D laser nanoprinting technique based on two-photon polymerization, high-quality meta-fibers are demonstrated for focusing light parallelly with a uniform numerical aperture (NA) as high as approximately 0.77. This may facilitate various applications such as optical trapping, generation of sophisticated beam profiles, and boosting light coupling efficiencies.

2.
Opt Express ; 31(22): 36202-36208, 2023 Oct 23.
Article in English | MEDLINE | ID: mdl-38017774

ABSTRACT

We present a detailed investigation into the sensing characteristics of a structural microfiber long-period grating (mLPG) sensor. By spirally winding a thinner microfiber to another thicker microfiber, periodic refractive index modulation is formed while the optical signal transmitted in the thicker microfiber is resonantly coupled out to the thinner microfiber, and then a 5-period four-port mLPG can be obtained with a device length of only ∼570 µm demonstrated a strong resonant dip of 25 dB. We studied the sensitivity characteristics of the four-port mLPG with surrounding strain, force, temperature and refractive index, and the obtained sensitivities were -6.4 pm/µÉ›, -8418.6 nm/N, 7.62 pm/°C and 2122 nm/RIU, respectively. With the advantages of high refractive index sensitivity and wide wavelength tunable range, the four-port mLPG has great potential in applications such as tunable filters and biochemical sensor.

3.
ACS Appl Mater Interfaces ; 15(26): 32057-32065, 2023 Jul 05.
Article in English | MEDLINE | ID: mdl-37352511

ABSTRACT

Humidity plays an important role in many fields, and the realization of high sensitivity and fast response simultaneously for humidity detection is a great challenge in practical application. In this work, we demonstrated a high-performance relative humidity (RH) sensor made by supporting zeolitic imidazolate framework-90 (ZIF-90)-derived porous zinc oxide (ZnO) onto an optical microfiber Sagnac interferometer (OMSI). The ZIF-90-modified OMSI (ZIF-90-OMSI) sensor was in situ heated at different temperatures to obtain porous ZnO, and their humidity-sensing properties were investigated ranging from 25 to 80% RH. The experimental results showed that the porous ZnO fiber sensor prepared at 500 °C (Z500-OMSI) exhibited best humidity-sensing performance with a high sensitivity of 96.2 pm/% RH (25-45% RH) and 521 pm/% RH (50-80% RH) and ultrafast response/recovery time (62.37/206.67 ms) at 22.3% RH. These performances were attributed to the complete transformation of ZIF-90 to ZnO at 500 °C. The obtained Z500 not only retained the high porosity and specific surface area of ZIF-90 but also exhibited the exceptional hydrophilicity of ZnO. In addition, the signals of the proposed Z500-OMSI sensor changed with different breathing patterns, indicating the possibility for human respiration monitoring. This work provided a reliable candidate for an effective RH monitoring system with potential application in medical diagnoses, industrial production, environmental detection, and human health monitoring.

4.
ACS Nano ; 17(11): 10577-10588, 2023 Jun 13.
Article in English | MEDLINE | ID: mdl-37145868

ABSTRACT

Capacitive deionization in environmental decontamination has been widely studied and now requires intensive development to support large-scale deployment. Porous nanomaterials have been demonstrated to play pivotal roles in determining decontamination efficiency and manipulating nanomaterials to form functional architecture has been one of the most exciting challenges. Such nanostructure engineering and environmental applications highlight the importance of observing, recording, and studying basically electrical-assisted charge/ion/particle adsorption and assembly behaviors localized at charged interfaces. In addition, it is generally desirable to increase the sorption capacity and reduce the energy cost, which increase the requirement for recording collective dynamic and performance properties that stem from nanoscale deionization dynamics. Herein, we show how a single optical fiber can serve as an in situ and multifunctional opto-electrochemical platform for addressing these issues. The surface plasmon resonance signals allow the in situ spectral observation of nanoscale dynamic behaviors at the electrode-electrolyte interface. The parallel and complementary optical-electrical sensing signals enable the single probe but multifunctional recording of electrokinetic phenomena and electrosorption processes. As a proof of concept, we experimentally decipher the interfacial adsorption and assembly behaviors of anisotropic metal-organic framework nanoparticles at a charged surface and decouple the interfacial capacitive deionization within an assembled metal-organic framework nanocoating by visualizing its dynamic and energy consumption properties, including the adsorptive capacity, removal efficiency, kinetic properties, charge, specific energy consumption, and charge efficiency. This simple "all-in-fiber" opto-electrochemical platform offers intriguing opportunities to provide in situ and multidimensional insights into interfacial adsorption, assembly, and deionization dynamics information, which may contribute to understanding the underlying assembly rules and the exploring structure-deionization performance correlations for the development of tailor-made nanohybrid electrode coatings for deionization applications.

5.
Photoacoustics ; 30: 100482, 2023 Apr.
Article in English | MEDLINE | ID: mdl-37025114

ABSTRACT

Photoacoustic tomography emerged as a promising tool for noninvasive biomedical imaging and diseases diagnosis. However, most of the current piezoelectric ultrasound transducers suffer optical opacity and tissue-mismatched acoustic impedance, hindering the miniaturization and integration of the system for multiscale and multimodal imaging. Here, a transparent polydimethylsiloxane (PDMS) encapsulated optical microfiber ultrasound sensor was demonstrated for photoacoustic imaging with scalable spatial resolution and penetration depth. The sensor comprised a microfiber loop sandwiched by a pair of in-line Bragg gratings, which formed an ultrasound-sensitive Fabry-Perot cavity allowing free delivery of ultrasound/light beams and unique needle-shaped ultrasound focusing along the penetration depth. The sensor with a detection limit of ∼ 700 Pa and a bandwidth of ∼ 10 MHz was applied for multiscale photoacoustic imaging of mouse ear and brain vasculatures. With advantages of flexibility, optical transparence and focusing capability, the sensor offers new opportunities for developing photoacoustic/ultrasound imaging devices for biomedical and clinic applications.

6.
Opt Express ; 29(9): 13937-13948, 2021 Apr 26.
Article in English | MEDLINE | ID: mdl-33985120

ABSTRACT

An optical microfiber interferometric biosensor for the low concentration detection of sequence-specific deoxyribonucleic acid (DNA) based on signal amplification technology via oligonucleotides linked to gold nanoparticles (Au-NPs) is proposed and experimentally analyzed. The sensor uses a "sandwich" detection strategy, in which capture probe DNA (DNA-c) is immobilized on the surface of the optical microfiber interferometer, the reporter probe DNA (DNA-r) is immobilized on the surface of Au-NPs, and the DNA-c and DNA-r are hybridized to the target probe DNA (DNA-t) in a sandwich arrangement. The dynamic detection of the DNA-t was found to range from 1.0×10-15 M to 1.0×10-8 M, and the limit of detection (LOD) concentration was 1.32 fM. This sensor exhibited not only a low LOD but also excellent selectivity against mismatched DNA-t, and it can be further developed for application in various sensing platforms.


Subject(s)
Biosensing Techniques/instrumentation , DNA/analysis , Gold/chemistry , Interferometry/instrumentation , Metal Nanoparticles/chemistry , Optical Devices , Equipment Design , Limit of Detection
7.
Opt Express ; 28(17): 24408-24417, 2020 Aug 17.
Article in English | MEDLINE | ID: mdl-32906982

ABSTRACT

Optofluidic sensors, which tightly bridge photonics and micro/nanofluidics, are superior candidates in point-of-care testing. A fiber-based interferometric optofluidic (FIO) sensor can detect molecular biomarkers by fusing an optical microfiber and a microfluidic tube in parallel. Light from the microfiber side coupled to the microtube leads to lateral localized light-fluid evanescent interaction with analytes, facilitating sensitive detection of biomolecules with good stability and excellent portability. The determination of the sensitivity with respect to the interplay between light and fluidics, however, still needs to be understood quantitatively. Here, we theoretically and experimentally investigate the relationship between refractive index (RI) sensitivity and individual geometrical parameters to determine the lateral localized light-fluid evanescent interaction. Theoretical analysis predicted a sensitive maximum, which could be realized by synergically tuning the fiber diameter d and the tube wall thickness t at an abrupt dispersion transition region. As a result, an extremely high RI sensitivity of 1.6×104 nm/RIU (σ=4074 nm/RIU), an order of magnitude higher than our previous results, with detection limit of 3.0×10-6 RIU, is recorded by precisely governing the transverse geometry of the setup. The scientific findings will guide future exploration of both new light-fluid interaction devices and biomedical sensors.

8.
Nanotechnology ; 31(44): 445602, 2020 Oct 30.
Article in English | MEDLINE | ID: mdl-32693391

ABSTRACT

To address a challenge for decoration of noble metal nanoparticles (NMNPs)-shell on conducting polymer nanofiber (CPNF) electrodes (i.e. NMNP-shell/CPNF-core electrodes) for boosting electrochemical performances, a two-step strategy comprising chemical pre-deposition and electrochemical deposition is designed. The strategy shows a high universality in terms of the diversity of NMNP-shell elements (single-element: AgNP-shell, AuNP-shell, PtNP-shell, PdNP-shell; multi-element: Au/Pt/PdNP-shell) and the independence of conductive substrates of electrodes. The shells are composed of high-density NMNPs and have strong adhesion to CPNF-cores. It is demonstrated that in response to a specific applied electrical stimulus, the resulting low doping level of CPNFs facilitates the generation of high-density nucleation sites (small NMNPs) by chemical pre-deposition (as high capability of electron transfer and low resistance to electron transfer from CP chains to NM ions), which is indispensable for the formation of NMNP-shells on CPNF-cores by electrochemical deposition. The decoration of NMNP-shells can significantly enhance the electrochemical performances of CPNF electrodes. Moreover, the great practicality and reliability of NMNP-shell/CPNF-core electrodes in use as an electrocatalytic platform are confirmed. This universal strategy opens up a new avenue to construct high-dimension shell/core-nanostructured electrodes.

9.
Opt Express ; 28(11): 15783-15793, 2020 May 25.
Article in English | MEDLINE | ID: mdl-32549415

ABSTRACT

Fiber-optic biosensors are of great interest to many bio/chemical sensing applications. In this study, we demonstrate a high-order-diffraction long period grating (HOD-LPG) for the detection of prostate specific antigen (PSA). A HOD-LPG with a period number of less than ten and an elongated grating pitch could realize a temperature-insensitive and bending-independent biosensor. The bio-functionalized HOD-LPG was capable of detecting PSA in phosphate buffered saline with concentrations ranging from 5 to 500 ng/ml and exhibited excellent specificity. A limit of detection of 9.9 ng/ml was achieved, which is promising for analysis of the prostate specific antigen.


Subject(s)
Biosensing Techniques/methods , Fiber Optic Technology/methods , Optical Fibers , Prostate-Specific Antigen/analysis , Prostate-Specific Antigen/immunology , Humans
10.
Opt Express ; 27(21): 29501-29509, 2019 Oct 14.
Article in English | MEDLINE | ID: mdl-31684210

ABSTRACT

In this paper, a gas refractometer based on microfiber Sagnac interferometer is demonstrated, which can achieve an ultrahigh sensitivity when operating at the group birefringence turning point. We undertake a theoretical analysis and a simulated calculation to study the device characteristics and obtain the specific parameters of ellipticity and long axis of the elliptic microfiber for the group birefringence turning point. In the experiment, we obtain a positive sensitivity of 0.295 nm/KPa and a negative sensitivity of -0.219 nm/KPa during gas pressure and refractive index (RI) sensing, the obtained highest RI sensitivity can reach 160,938.9 nm/RIU. To further reveal its practical potential in gas detection, we conduct CO2 gas concentration detection and the device also demonstrates ultrahigh sensitivity and good repeatability. Besides, temperature sensing is performed to explore its temperature response wherein it shows a sensitivity of 486.7 pm/ °C. These results show its potential for use in gas- and acoustic-sensing applications.

11.
Anal Chem ; 91(21): 14141-14148, 2019 11 05.
Article in English | MEDLINE | ID: mdl-31599567

ABSTRACT

In clinical diagnosis, accurate and reliable measurement technologies for the detection of disease biomarkers at ultralow concentrations can provide guidance for the initiation of treatment and potentially improve survival for patients. Here, we demonstrate an optical microfiber reader for enhanced analytical sensitivity in enzyme-linked immunosorbent assays (ELISA) that enables the detection of tiny changes of the refractive index (RI) induced by the catalyzed oxidation of substrate, owing to the strong interaction between the evanescent field and surrounding medium. By employing the microfiber reader for the C-reaction protein (CRP) and interleukin-6 (IL-6) assays after the enzymatic signal amplification in ELISA, we experimentally investigate the biosensing capacity of the device. As a result, log-linear relations of CRP and IL-6 detection in PBS and human serum between the concentration and spectral response were obtained at both nanogram and picogram levels, respectively, and anti-CRP/HRP detection as low as 9.75 pg/mL was achieved, which was undetectable by the conventional spectrophotometry. With a stable, accurate, and color-free detection capacity, this optical microfiber reader has a promising prospect in early disease diagnosis and clinical treatment.


Subject(s)
Biosensing Techniques , C-Reactive Protein/analysis , Enzyme-Linked Immunosorbent Assay , Fiber Optic Technology , Interleukin-6/analysis , Optical Fibers , Biosensing Techniques/instrumentation , C-Reactive Protein/metabolism , Enzyme-Linked Immunosorbent Assay/instrumentation , Equipment Design , Fiber Optic Technology/instrumentation , Horseradish Peroxidase/chemistry , Horseradish Peroxidase/metabolism , Humans , Interleukin-6/metabolism
12.
Opt Express ; 27(16): 23103-23111, 2019 Aug 05.
Article in English | MEDLINE | ID: mdl-31510592

ABSTRACT

We present here a detailed investigation into the sensitivity of the taper-based Mach-Zehnder interferometer as a function of external refractive index, with particular attention to the dispersion turning point (DTP) and possibilities for ultra-sensitive sensors. Our numerical simulation revealed that two DTPs exist with a decrease in the microfiber waist diameter; given this relationship, it is possible to obtain an ultra-sensitive operation. We then conducted experiments with fabricated devices with different waist diameters to achieve both positive and negative sensitivities at two DTPs. In particular, we achieved an ultrahigh refractive index sensitivity of approximately 95,832 nm/RIU at the second DTP when working with a diameter of 1.87 µm around the RI of air. These results show its potential for use in acoustic sensing and biochemical detection.

13.
Anal Chem ; 90(18): 10851-10857, 2018 09 18.
Article in English | MEDLINE | ID: mdl-30141911

ABSTRACT

Highly sensitive detection of molecular tumor markers is essential for biomarker-based cancer diagnostics. In this work, we showcase the implementation of fiber light-coupled optofluidic waveguide (FLOW) immunosensor for the detection of p53 protein, a typical tumor marker. The FLOW consists of a liquid-core capillary and an accompanying optical fiber, which allows evanescent interaction between light and microfluidic sample. Molecular binding at internal surface of the capillary induces a response in wavelength shift of the transmission spectrum in the optical fiber. To enable highly sensitive molecular detection, the evanescent-wave interaction has been strengthened by enlarging shape factor R via fine geometry control. The proposed FLOW immunosensor works with flowing microfluid, which increases the surface molecular coverage and improves the detection limit. As a result, the FLOW immunosensor presents a log-linear response to the tumor protein at concentrations ranging from 10 fg/mL up to 10 ng/mL. In addition, the nonspecifically adsorbed molecules can be effectively removed by the fluid at an optimal flow rate, which benefits the accuracy of the measurement. Tested in serum samples, the FLOW successfully maintains its sensitivity and specificity on p53 protein, making it suitable for diagnostics applications.


Subject(s)
Biomarkers, Tumor/blood , Biosensing Techniques , Immunoassay/methods , Optical Fibers , Tumor Suppressor Protein p53/blood , Humans , Limit of Detection , Point-of-Care Systems
14.
Opt Express ; 26(10): 12903-12911, 2018 May 14.
Article in English | MEDLINE | ID: mdl-29801323

ABSTRACT

We propose and demonstrate a novel type of sampled Bragg gratings by combining a helically twisted fiber and a Bragg grating. A comb-like spectrum with a series of harmonic narrow resonances is observed, and the influence of geometrical parameters on the resonances is studied. As a special application, the intrinsic nature of the device that contains the Bragg grating and helical fiber spectral responses permits the temperature to be detected from the former, whereas the mechanical torsion is extracted from the latter, suggesting a potential for the simultaneous measurement of these two parameters. The proposed configuration features simplification, easy fabrication, high flexibility, stability, and low cost, and therefore has good prospects for sensor applications, as well as other applications, such as multi-channel filters, distributed Bragg reflectors, etc.

15.
Opt Lett ; 43(4): 655-658, 2018 Feb 15.
Article in English | MEDLINE | ID: mdl-29444045

ABSTRACT

We present a type of few-period helically twisted all-solid photonic bandgap fiber (AS-PBGFs). The helical structure leads to orbital resonance of a cladding rod light, which couples with the core mode. A two-period twist structure exhibits an extremely strong resonant dip of up to 30 dB. A series of samples with twist periods of 3.31-7.92 mm (yielding twist rates of 1.90-0.79 rad⋅mm-1) in association with different resonance orders are fabricated and demonstrated. The inherent physical mechanism underlying the resonance is analyzed. Moreover, the responses of the resonance to mechanical torsion, strain, and temperature are investigated. The twisted AS-PBGFs feature high reproducibility, stability, and robustness, and have great potential in tunable in-fiber filters and sensors.

16.
Biosens Bioelectron ; 100: 155-160, 2018 Feb 15.
Article in English | MEDLINE | ID: mdl-28888177

ABSTRACT

Fiber optics evanescent field based biosensor is an excellent candidate for label-free detection of cardiac biomarkers which is of great importance in rapid, early, and accurate diagnosis of acute myocardial infarction (AMI). In this paper, we report a compact and sensitive cardiac troponin I (cTn-I) immunosensor based on the phase-shifted microfiber Bragg grating probe which is functionalized. The fine reflective signal induced by the phase shift in modulation significantly improves the spectral resolution, enabling the ability of the sensor in perceiving an ultra-small refractive index change due to the specific capture of the cTn-I antigens. In buffer, a log-linear sensing range from 0.1 to 10ng/mL and a limit of detection (LOD) of 0.03ng/mL (predicted to be as low as 10.8pg/mL) are obtained. Furthermore, with good specificity, the sensor can be applied in test of cTn-I in human serum samples. The proposed sensor presents superiorities such as improved integratability and portability, easy fabrication and operation, and intrinsic compatibility to the fiber-optic network, and thus has a promising prospect in "point-of-care" test for cardiac biomarkers and preclinical diagnosis.


Subject(s)
Biosensing Techniques/instrumentation , Fiber Optic Technology/instrumentation , Myocardial Infarction/blood , Troponin I/blood , Equipment Design , Humans , Immunoassay/instrumentation , Limit of Detection , Miniaturization , Myocardial Infarction/diagnosis , Optical Fibers , Point-of-Care Systems , Refractometry
17.
Opt Express ; 25(12): 13305-13313, 2017 Jun 12.
Article in English | MEDLINE | ID: mdl-28788866

ABSTRACT

Nucleic acid detection with label-free biosensors circumvents the need for costly fluorophore functionalization steps associated with conventional assays by utilizing optical fiber transducers. In spite of their technological prowess, however, these biosensors' sensitivity is limited by the design/configuration of their transducers. Therefore, it is imperative to integrate novel optical fiber transducers with existing label-free approaches to overcome those limitations. Herein, we present a high sensitivity label-free fiber optic biosensor that employs polarimetric interference of a high-birefringence (Hi-Bi) microfiber to specifically detect DNA molecules. A slight target DNA concentration change is converted into an optical wavelength shift of polarimetric interference generated by the microfiber Sagnac interferometer. The sensor provides a log-linear response to target ssDNA concentrations range from 100 pM to 1 µM and a minimum detectable concentration of 75 pM.

18.
Opt Express ; 24(24): 27152-27159, 2016 Nov 28.
Article in English | MEDLINE | ID: mdl-27906289

ABSTRACT

A label-free and ultrasensitive microfiber interferometer biosensor has been demonstrated for detection of neurotransmitter molecule (5-HT). The surface morphology of the silicon dioxide nanospheres acting as molecule sieve provides an effective mean of gathering 5-HT molecules by designed mesoporous structure. The slight concentration change of 5-HT molecules is translated into a dramatic wavelength shift of the interferometric fringe pattern. The experimental results show that the biosensor has a linear response in concentration range from 100 fM to 1 µM and a detection limit as low as 84 fM.


Subject(s)
Biosensing Techniques/instrumentation , Nanospheres , Serotonin/analysis , Equipment Design , Interferometry , Neurotransmitter Agents , Silicon/chemistry , Silicon Dioxide/chemistry
19.
Opt Express ; 24(22): 25380-25388, 2016 Oct 31.
Article in English | MEDLINE | ID: mdl-27828476

ABSTRACT

We report novel microfiber long period gratings (MF-LPGs) characterized by higher-order diffraction, which are fabricated using an arc discharge method. It is shown that an 11-period MF-LPG can exhibit an extremely high resonant dip (>30 dB) and a low transmission loss (<1.0 dB). A series of grating samples with elongated periods, from 400 µm to 1000 µm, and different diffraction orders have been fabricated and studied in contrast to the previously reported counterparts. The proposed structures have high reproducibility, stability, flexibility, and low production costs. Moreover, the resonant wavelength has a large refractive index (RI) sensitivity (up to ~3762.31 nm/RI-unit around RI = 1.383) and a very low temperature coefficient (~3.09 pm/°C at 1401.3 nm) for a structure with a diameter of 9.6 µm. The theoretical analysis shows good agreement with the experimental results. Our study should be useful for future applications of MF-LPGs in micro-scale in-fiber devices and sensors.

20.
Opt Express ; 24(17): 19814-23, 2016 Aug 22.
Article in English | MEDLINE | ID: mdl-27557257

ABSTRACT

Optical coherence tomography (OCT) is an attractive modality in biomedical imaging systems due to its non-invasive imaging character. Since the image quality of OCT may be limited by the decrease of transverse resolution away from the focus spot, working distance tunable probe can be a strategy to overcome such limitation and maintain high transverse resolution at different imaging depths. In this paper, a miniature, working distance-tunable in-fiber OCT probe is demonstrated. The influences of the graded index fiber (GIF) length as well as the air cavity length on the working distance and the transverse resolution are simulated and discussed. Experimental results prove that the working distance can be tuned freely from 337.31 µm to 22.28 µm, producing the transverse resolution from 13.86 µm to 3.6 µm, which are in good agreement with the simulated results. The application of the probe in an OCT system for imagining a standard USAF resolution target is investigated in detail. The best resolutions for the standard USAF resolution target imaging are 4.9 µm and 6.9 µm in horizontal and vertical direction, respectively.

SELECTION OF CITATIONS
SEARCH DETAIL
...