Monitoring of low-molecular-weight protein aggregation by CE-SDS as a complementary method to SE-HPLC.

Capillary electrophoresis with sodium dodecyl sulfate (CE-SDS) has long been proven to have excellent performance in the analysis and characterization of therapeutic proteins. However, it is rarely used for the detection of low-molecular-weight proteins or peptides. Our research has proved the ability of CE-SDS to characterize the purity of low-molecular-weight proteins (i.e., <10 kDa) and even polypeptides. In this article, insulin glargine was used as a model protein, and CE-SDS was used to analyze the samples damaged by heating and light exposure. The monomers, dimers, and trimers of insulin glargine were effectively separated, and the results of the mass spectrometry also confirmed the existence of two kinds of insulin aggregates. For comparison, the size-exclusion high-performance liquid chromatography (SE-HPLC) only showed a single aggregate peak. In addition, the denaturation conditions caused only the covalent aggregates to appear in the CE-SDS analysis. These advantages also make CE-SDS an excellent supplementary technology to the traditional SE-HPLC, providing biopharmaceutical analysts with more information.

Effects of polyol excipient stability during storage and use on the quality of biopharmaceutical formulations.

Biopharmaceuticals are formulated using a variety of excipients to maintain their storage stability. However, some excipients are prone to degradation during repeated use and/or improper storage, and the impurities generated by their degradation are easily overlooked by end users and are usually not strictly monitored, affecting the stability of biopharmaceuticals. In this study, we evaluated the degradation profile of polyol excipient glycerol during repeated use and improper storage and identified an unprecedented cyclic ketal impurity using gas chromatography with mass spectrometry (GC-MS). The other polyol excipient, mannitol, was much more stable than glycerol. The effects of degraded glycerol and mannitol on the stability of the model biopharmaceutical pentapeptide, thymopentin, were also evaluated. The thymopentin content was only 66.4% in the thymopentin formulations with degraded glycerol, compared to 95.8% in other formulations after the stress test. Most glycerol impurities (i.e., aldehydes and ketones) reacted with thymopentin, affecting the stability of thymopentin formulations. In conclusion, this work suggests that more attention should be paid to the quality changes of excipients during repeated use and storage. Additional testing of excipient stability under real or accelerated conditions by manufacturers would help avoid unexpected and painful results.

Identification and characterization of chemical and physical stability of insulin formulations utilizing degraded glycerol after repeated use and storage.

Insulin treatment is currently considered to be the main strategy for controlling diabetes. Although the recombinant insulin formulation is relatively mature, we found that a batch of insulin formulation exhibited an unusual degradation rate in the stability experiment. The main purposes of this article are to identify the root cause for this phenomenon and characterize of chemical and physical degradation products. We compared the chemical and physical stability of two batches of insulin formulations prepared separately with simulated repeated use and freshly opened glycerol. The chemical stability of insulin was identified by liquid chromatography coupled with tandem mass spectrometry (LC- MS/MS). Micro-flow imaging (MFI), far-ultraviolet circular dichroism (Far-UV CD) and Thioflavin T (ThT) fluorescent assays were used to reveal protein aggregation and fibrosis. The chemical and physical stability of the insulin formulation with newly opened glycerol was much better than that with degraded glycerol, and both groups of formulations were extremely sensitive to light. The results indicated that the original batch insulin formulation with abnormal stability was indeed caused by the excipient glycerol after long-term storage and repeated usage. More attention should be paid to the quality changes of excipients during repeated usage and storage of excipients for the practical purpose. Moreover, we have discovered a novel degradation pathway for insulin and peptides in general. In addition, LC-MS/MS results suggested that the N-terminus of insulin B-chain was prone to chemical degradation which enlightens that it could be potentially modified to improve the stability of insulin formulations.

Investigation of an Uncommon Artifact during Reducing Capillary Electrophoresis-Sodium Dodecyl Sulfate Analysis of a Monoclonal Antibody with Dynamic Light Scattering and Reversed Phase High-Performance Liquid Chromatography.

PURPOSES: In reducing capillary electrophoresis sodium dodecyl sulfate (CE-SDS) analysis of a monoclonal antibody (mAb-1), the peak area ratio of heavy chain (HC) to light chain (LC) was out of balance, while multiple artifact peaks were observed following the migration of HC. The main purposes of this study were to describe the techniques utilized to eliminate this artifact and clarify the root cause for this interesting phenomenon. METHODS: We optimized the CE-SDS analysis of mAb-1 by a vairety of techniques including changing the concentration of protein or replacing SDS with a more hydrophobic surfactant (i.e., sodium hexadecyl sulfate (SHS) or sodium tetradecyl sulfate (STS) instead of SDS) in sample and/or the sieving gel buffer. Dynamic light scattering (DLS) and reversed phase high-performance liquid chromatography (RP-HPLC) were used to study the protein-surfactant complex. RESULTS: The artifact could be partially mitigated by reducing the protein concentration and replacing SDS with SHS or STS in the sample and/or the sieving gel buffer solutions. Due to replacing a more hydrophobic surfactant, the HC-surfactant complex formed was more resistant to dissociation, preventing additional hydrophobic HC-HC interaction and aggregation, thus eliminating the artifact problem. CONCLUSIONS: DLS and RP-HPLC are powerful supplementary techniques in characterizing the protein-surfactant complex, and hydrophobic surfactants such as SHS and STS could afford more normal electropherograms during the analysis of mAbs.

Freeze-Dried Biopharmaceutical Formulations are Surprisingly Less Stable than Liquid Formulations during Dropping.

PURPOSES: This article describes an interesting phenomenon in which optimized freeze-dried (FD) biopharmaceutical formulations are generally more prone to degradation than their liquid counterparts during dropping and proposes an underlying cause for this surprising phenomenon. METHODS: Two monoclonal antibodies (mAbs) and a fusion protein (FP) were used as model biopharmaceuticals. The stability after dropping stress was determined by ultraviolet-visible (UV-Vis), size exclusion high-performance liquid chromatography (SE-HPLC), micro-flow imaging (MFI), and dynamic light scattering (DLS). RESULTS: Contrary to what we would normally assume, the FD formulations of the three biopharmaceuticals studied here generally showed much higher amounts of protein sub-visible particles (SbVPs) than liquid formulations after applying the same dropping stress as determined by MFI and DLS. Traditional techniques, such as UV-Vis and SE-HPLC, could hardly detect such degradation. CONCLUSIONS: We propose that the higher temperature caused by dropping for the FD powders than the liquid formulations was probably one of the root causes for the higher amount of particles formed for the FD powders. We also recommend that dropping stress should be included for early-stage screening and choosing liquid versus FD biopharmaceutical formulations.

Characterization of Grinding-Induced Subvisible Particles and Free Radicals in a Freeze-Dried Monoclonal Antibody Formulation.

PURPOSES: The primary objectives of this study were to investigate the degradation mechanisms of freeze-dried monoclonal antibody (mAb) formulations under mechanical grinding, assess the sensitivity and suitability of various particle analysis techniques, analyze the structure of the collected subvisible particles (SbVPs), and analyze the antioxidant mechanism of methionine (Met) under degradation process to gain a thorough understanding of the phenomenon. METHODS: The freeze-dried mAb-X formulations underwent grinding, and the resultant SbVPs were characterized through visual inspection, flow imaging microscopy, dynamic light scattering, ultraviolet-visible spectroscopy, and size-exclusion high-performance liquid chromatography. We further evaluated the effect of different temperatures and the free radical scavenger Met on SbVP formation. The produced free radicals were detected using electron paramagnetic resonance, and Met S-oxide formation was detected using liquid chromatography-mass spectrometry. In addition, we analyzed the obtained SbVPs using capillary electrophoresis sodium dodecyl sulfate and Fourier transform infrared spectroscopy. RESULTS: Grinding leads to SbVP formation under high temperature and free radical formation. Free radicals produced during grinding require the participation of a macromolecule. Met could then bind to the produced free radicals, thus partially protecting mAb-X from degradation while itself undergoing oxidation to form Met(O). Sensitivity differences between different particle analysis techniques were evaluated, and the obtained SbVPs showed significant changes in secondary structure and the formation of covalent aggregates and fragments. CONCLUSIONS: Met plays the role of an antioxidant in protecting macromolecules by quenching the free radicals produced during grinding. To thoroughly characterize SbVPs, multiple and orthogonal particle analysis techniques should be used, and if necessary, SbVPs should be processed by enrichment to accurately analyze primary and high order structures.

Critical process parameter identification of manufacturing processes of Astragali Radix extract with a weighted determination coefficient method.

Objective: Critical process parameters (CPPs) identification is an important step of the implementation of quality by design (QbD) concept. There are many CPP identification methods, such as risk analysis method, sensitivity analysis method, multiple linear regression method, standard partial regression coefficient (SPRC) method, and so on. The SPRC method can consider multiple process critical quality attributes (CQAs) simultaneously, but the determination of CPP number is subjective. Therefore, new CPP identification method is still required. Methods: The manufacturing process of Astragali Radix extract, which contained water reflux extraction, concentration, and ethanol precipitation, was used as an example. First, the multiple process CQAs were determined to be the yield of pigment, dry matter, sugars, and active ingredients. Second, the potential CPPs were determined by a knowledge organization method. Plackett-Burman designed experiments were then performed. A weighted determination coefficient ( R w 2 ) method was presented to identify CPPs. In this method, the importance of different CQAs was considered. Process parameters were removed one-by-one according to their importance index. The decrease in R w 2 was used to characterize the importance of the removed parameter. If the decrease of R w 2 was less than a preset threshold, the removed parameter was not a CPP. Results: During the manufacturing process of Astragali Radix extract, the potential CPPs determined by the knowledge organization method were water consumption, reflux extraction time, extraction frequency, ethanol content, ethanol consumption, and concentration endpoint. Reflux extraction time, the first ethanol consumption, the second ethanol consumption, and the second ethanol precipitation refrigeration temperature were found to be CPPs using the weighted determination coefficient method with the threshold of 10%. Conclusion: Using the weighted determination coefficient method, CPPs can be determined with all the CQAs considered based on their importance. The determination of CPP number is more objective compared with the SPRC method.