Multiwavelength High-Detectivity MoS2 Photodetectors with Schottky Contacts.

Photodetection is one of the vital functions for the multifunctional "More than Moore" (MtM) microchips urgently required by Internet of Things (IoT) and artificial intelligence (AI) applications. The further improvement of the performance of photodetectors faces various challenges, including materials, fabrication processes, and device structures. We demonstrate in this work MoS2 photodetectors with a nanoscale channel length and a back-gate device structure. With the mechanically exfoliated six-monolayer-thick MoS2, a Schottky contact between source/drain electrodes and MoS2, a high responsivity of 4.1 × 103 A W-1, and a detectivity of 1.34 × 1013 cm Hz1/2 W-1 at 650 nm were achieved. The devices are also sensitive to multiwavelength lights, including 520 and 405 nm. The electrical and optoelectronic properties of the MoS2 photodetectors were studied in depth, and the working mechanism of the devices was analyzed. The photoinduced Schottky barrier lowering (PIBL) was found to be important for the high performance of the phototransistor.

Highly heterogeneous epitaxy of flexoelectric BaTiO3-δ membrane on Ge.

The integration of complex oxides with a wide spectrum of functionalities on Si, Ge and flexible substrates is highly demanded for functional devices in information technology. We demonstrate the remote epitaxy of BaTiO3 (BTO) on Ge using a graphene intermediate layer, which forms a prototype of highly heterogeneous epitaxial systems. The Ge surface orientation dictates the outcome of remote epitaxy. Single crystalline epitaxial BTO3-δ films were grown on graphene/Ge (011), whereas graphene/Ge (001) led to textured films. The graphene plays an important role in surface passivation. The remote epitaxial deposition of BTO3-δ follows the Volmer-Weber growth mode, with the strain being partially relaxed at the very beginning of the growth. Such BTO3-δ films can be easily exfoliated and transferred to arbitrary substrates like Si and flexible polyimide. The transferred BTO3-δ films possess enhanced flexoelectric properties with a gauge factor of as high as 1127. These results not only expand the understanding of heteroepitaxy, but also open a pathway for the applications of devices based on complex oxides.

Hybrid System Combining Two-Dimensional Materials and Ferroelectrics and Its Application in Photodetection.

Photodetectors are one of the most important components for a future "Internet-of-Things" information society. Compared to the mainstream semiconductor-based photodetectors, emerging devices based on two-dimensional (2D) materials and ferroelectrics as well as their hybrid systems have been extensively studied in recent decades due to their outstanding performances and related interesting physical, electrical, and optoelectronic phenomena. In this paper, we review the photodetection based on 2D materials and ferroelectric hybrid systems. The fundamentals of 2D and ferroelectric materials as well as the interaction in the hybrid system will be introduced. Ferroelectricity modulated optoelectronic properties in the hybrid system will be discussed in detail. After the basics and figures of merit of photodetectors are summarized, the 2D-ferroelectrics devices with different structures including p-n diodes, Schottky diodes, and field-effect transistors will be reviewed and compared. The polarization of ferroelectrics offers the possibility of the modulation and enhancement of the photodetection in the hybrid detectors, which will be discussed in depth. Finally, the challenges and perspectives of the photodetectors based on 2D ferroelectrics will be proposed. This Review outlines the important aspects of the recent development of the hybrid system of 2D and ferroelectric materials, which could interact with each other and thus lead to photodetectors with higher performances. Such a Review will be helpful for the research of emerging physical phenomena and for the design of multifunctional nanoscale electronic and optoelectronic devices.

Genome-Wide Detection of Runs of Homozygosity in Laiwu Pigs Revealed by Sequencing Data.

Laiwu pigs, distinguished by their high intramuscular fat of 7-9%, is an indigenous pig breed of China, and recent studies also found that Laiwu pigs showed high resistance to Porcine circovirus type 2. However, with the introduction of commercial varieties, the population of Laiwu pigs has declined, and some lineages have disappeared, which could result in inbreeding. Runs of homozygosity (ROH) can be used as a good measure of individual inbreeding status and is also normally used to detect selection signatures so as to map the candidate genes associated with economically important traits. In this study, we used data from Genotyping by Genome Reducing and Sequencing to investigate the number, length, coverage, and distribution patterns of ROH in 93 Chinese Laiwu pigs and identified genomic regions with a high ROH frequency. The average inbreeding coefficient calculated by pedigree was 0.021, whereas that estimated by all detected ROH segments was 0.133. Covering 13.4% of the whole genome, a total of 7,508 ROH segments longer than 1 Mb were detected, whose average length was 3.76 Mb, and short segments (1-5 Mb) dominated. For individuals, the coverage was in the range between 0.56 and 36.86%. For chromosomes, SSC6 had the largest number (n = 688), and the number of ROH in SSC12 was the lowest (n = 215). Thirteen ROH islands were detected in our study, and 86 genes were found within those regions. Some of these genes were correlated with economically important traits, such as meat quality (ECI1, LRP12, NDUFA4L2, GIL1, and LYZ), immunity capacity (IL23A, STAT2, STAT6, TBK1, IFNG, and ITH2), production (DCSTAMP, RDH16, and GDF11), and reproduction (ODF1 and CDK2). A total of six significant Gene Ontology terms and nine significant Kyoto Encyclopedia of Genes and Genomes (KEGG) pathways were identified, most of which were correlated with disease resistance and biosynthesis processes, and one KEGG pathway was related to lipid metabolism. In addition, we aligned all of the ROH islands to the pig quantitative trait loci (QTL) database and finally found eight QTL related to the intramuscular fat trait. These results may help us understand the characteristics of Laiwu pigs and provide insight for future breeding strategies.

Whole-genome SNP markers reveal conservation status, signatures of selection, and introgression in Chinese Laiwu pigs.

Laiwu pigs are a Chinese indigenous breed that is renowned for its exceptionally high intramuscular fat content (average greater than 6%), providing an excellent genetic resource for the genetic improvement of meat quality of modern commercial pigs. To uncover genetic diversity, population structure, signature of selection, and potential exotic introgression in this breed, we sampled 238 Laiwu pigs from a state-supported conservation population and genotyped these individuals using GeneSeek 80K SNP BeadChip. We then conducted in-depth population genetics analyses for the Laiwu pig in a context of 1,116 pigs from 42 Eurasian diverse breeds. First, we show that the current Laiwu population has more abundant genetic diversity than the population of 18 years ago likely due to gene flow from European commercial breeds. Both neighbor-joining (NJ) and principal component analyses indicate the introgression of European haplotypes into Laiwu pigs. The admixture analysis reveals that an average 26.66% of Laiwu genetic components are of European origin. Then, we assigned the tested individuals to different families according to their clustering patterns in the NJ tree and proposed a family-based conservation strategy to reduce the risk of inbreeding depression in Laiwu pigs. Next, we explored three statistics (ROH and iHS and EigenGWAS) to identify a list of candidate genes for fat deposition, reproduction, and growth in Laiwu pigs. Last, we detected a strong signature of introgression from European pigs into Laiwu pigs at the GPC6 locus that regulates the growth of developing long bones. Further association analyses indicate that the introgressed GPC6 haplotype likely contributed to the improvement of growth performance in Laiwu pigs. Altogether, this study not only benefits the better conservation of the Laiwu pig, but also advances our knowledge of the poorly understood effect of human-mediated introgression on phenotypic traits in Chinese indigenous pigs.

Discrete Block Copolymers with Diverse Architectures: Resolving Complex Spherical Phases with One Monomer Resolution.

This work describes the first rigorous example of a single-component block copolymer system forming unconventional spherical phases. A library of discrete block polymers with uniform chain length and diverse architectures were modularly prepared through a combination of a step-growth approach and highly efficient coupling reactions. The precise chemical structure eliminates all the molecular defects associated with molar weight, dispersity, and compositional ratio. Complex spherical phases, including the Frank-Kasper phase (A15 and σ) and quasicrystalline phase, were experimentally captured by meticulously tuning the composition and architectures. A phase portrait with unprecedented accuracy was mapped out (up to one monomer resolution), unraveling intriguing details of phase behaviors that have long been compromised by inherent molecular weight distribution. This study serves as a delicate model system to bridge the existing gaps between experimental observations and theoretical assessments and to provide insights into the formation and evolution of the unconventional spherical phases in soft matter systems.

Reliable resistive switching of epitaxial single crystalline cubic Y-HfO2 RRAMs with Si as bottom electrodes.

Previous studies have mainly focused on the resistive switching (RS) of amorphous or polycrystalline HfO2-RRAM. The RS of single crystalline HfO2 films has been rarely reported. Yttrium doped HfO2 (YDH) thin films were fabricated and successful Y incorporation into HfO2 was confirmed by x-ray photoemission spectroscopy. A pure cubic phase of YDH and an abrupt YDH/Si interface were obtained and verified by x-ray diffraction, Raman spectroscopy and transmission electron microscopy. A Pt/YDH/n++-Si heterostructure using Si as the bottom electrode was fabricated, which shows stable RS with an ON/OFF ratio of 100 and a reliable data retention (104 s). The electron transport mechanism was investigated in detail. It indicates that hopping conduction is dominating when the device is at a high resistance state, while space charge limited conduction acts as the dominant factor at a low resistance state. Such behavior, which is different from devices using TiN or Ti as electrodes, was attributed to the Y doping and specific YDH/Si interface. Our results demonstrate a proof of concept study to use highly doped Si as bottom electrodes along with single crystalline YDH as insulator layer for such RRAM applications as wireless sensors and synaptic simulation.

Precise modulation of molecular weight distribution for structural engineering.

As one of the most critical molecular parameters, molecular weight distribution has a profound impact on the structure and properties of polymers. Quantitative and comprehensive understanding, however, has yet to be established, mainly due to the challenge in the precise control and regulation of molecular weight distribution. In this work, we demonstrated a robust and effective approach to artificially engineer the molecular weight distribution through precise recombination of discrete macromolecules. The width, symmetry, and other characteristics of the distribution can be independently manipulated to achieve absolute control, serving as a model platform for highlighting the importance of chain length heterogeneity in structural engineering. Different from their discrete counterparts, each individual component in dispersed samples experiences a varied degree of supercooling at a specific crystallization temperature. Non-uniform crystal nucleation and growth kinetics lead to distinct molecular arrangements. This work could bridge the gap between discrete and dispersed macromolecules, providing fundamental perspectives on the critical role of molecular weight distribution.

946 nm Nd: YAG double Q-switched laser based on monolayer WSe2 saturable absorber.

In this paper, we report a 946nm double Q-switched laser side pumped by an 808-nm pulse laser diode (LD). A layered tungsten diselenide (WSe2) saturable absorber (SA) together with an MgO doped LiNbO3 electro-optic (EO) modulator is applied to double Q-switch the Nd: YAG laser, producing trains of nanosecond-duration pulses with 500 Hz repetition rate. Such WSe2 saturable absorbers are fabricated by chemical vapor deposition (CVD) in a hot wall chamber and then embedded into a resonant mirror. The achieved pulse energy of double Q-switched laser at 946 nm is approximately 2.63 mJ with 10.8 ns pulse width and the peak power is round 244 kW, corresponding to the beam quality factors of M2x = 3.846,M2y = 3.861. Monolayer WSe2 nanosheets applied in the experiment would be a promising SA for passive Q-switching operation.

Multiply fully recyclable carbon fibre reinforced heat-resistant covalent thermosetting advanced composites.

Nondestructive retrieval of expensive carbon fibres (CFs) from CF-reinforced thermosetting advanced composites widely applied in high-tech fields has remained inaccessible as the harsh conditions required to recycle high-performance resin matrices unavoidably damage the structure and properties of CFs. Degradable thermosetting resins with stable covalent structures offer a potential solution to this conflict. Here we design a new synthesis scheme and prepare a recyclable CF-reinforced poly(hexahydrotriazine) resin matrix advanced composite. The multiple recycling experiments and characterization data establish that this composite demonstrates performance comparable to those of its commercial counterparts, and more importantly, it realizes multiple intact recoveries of CFs and near-total recycling of the principal raw materials through gentle depolymerization in certain dilute acid solution. To our best knowledge, this study demonstrates for the first time a feasible and environment-friendly preparation-recycle-regeneration strategy for multiple CF-recycling from CF-reinforced advanced composites.

Folate deficiency during early-mid pregnancy affects the skeletal muscle transcriptome of piglets from a reciprocal cross.

Folate deficiency (FD) during pregnancy can cause fetal intrauterine growth restriction in pigs, of which the skeletal dysplasia is a major manifestation. Factors influencing muscle development are very important in the formation of porcine meat quality trait. However, the effect of folate deficiency on skeletal muscle development and its molecular mechanisms are unknown. The objective of this study is to determine the effect of maternal folate deficiency on the skeletal muscle transcriptome of piglets from a reciprocal cross, in which full-sibling Landrace (LR) and full-sibling Chinese local breed Laiwu (LW) pigs were used for reciprocal cross matings, and sows were fed either a folate deficient or a normal diet during early-mid gestation. In addition, the difference in the responsiveness of the piglets to folate deficiency during early-mid pregnancy between reciprocal cross groups was investigated. Longissimus dorsi (LD) muscle samples were collected from newborn piglets and a 4 × 44K Agilent porcine oligo microarray was used for transcriptome analysis of porcine LD muscle. The results showed that folate deficiency during early-mid pregnancy affected piglet body weight, LD muscle fiber number and content of intramuscular triglyceride. The microarray results indicated that 3154 genes were differentially expressed between folate deficient and normal piglets from the LR♂ × LW♀ cross, and 3885 differentially expressed genes (DEGs) in the ones from the LW♂ × LR♀ cross. From functional analyses, sow folate deficiency affected almost all biological processes in the progeny. Lipid metabolism-related genes and associated metabolic pathways were regulated extensively by folate deficiency, especially in LR♂ × LW♀ cross piglets. Most of the genes that are regulated by folate deficiency in the LD muscle of piglets were different between LR♂ × LW♀ and LW♂ × LR♀ crosses, suggesting some epigenetic effects of FD exist in genes underlying myogenesis and intramuscular fat deposition in piglets.

[Relationship of genetic polymorphism of PRLR and RBP4 genes with litter size traits in pig].

The polymorphism of prolactin receptor (PRLR) and retinol-binding protein 4 (RBP4) genes was detected by PCR-RFLP method, and the effects of PRLR and RBP4 genes on litter size traits in pig were analyzed by the least square analysis. Data of total number born (TNB) and number born alive (NBA) from 323 sows, including five Shandong local pig breeds and three foreign pig breeds, were collected. The results showed that the polymorphic sites of both PRLR and RBP4 genes were found in all populations tested. The genotype distribution, however, revealed great differences between Shandong local pig breeds and foreign pig breeds. The effects of genotypes on TNB and NBA were significant (P<0.05). The homozygote AA was the most prolific genotype. For PRLR gene, AA genotypic sows of Shandong local pig breeds and foreign pig breeds produced 1.03 TNB, 0.89 NBA, and 1.26 TNB, 1.11 NBA more than BB genotypic sows, respectively. For RBP4 gene, AA genotypic sows of Shandong local pig breeds and foreign pig breeds produced 0.59 TNB, 0.51 NBA and 0.72 TNB, 0.64 NBA more than BB genotypic sows, respectively.

Developmental changes of Col3a1 mRNA expression in muscle and their association with intramuscular collagen in pigs.

Eighty-four castrated boars including Laiwu Black (LW) (weight 30-90 kg, n=6) and Lulai Black (LL) (weight 40-100 kg, n=6) were used to study the developmental changes of collagen type III alpha 1 (Col3a1) mRNA expression in the muscle and their association with intramuscular collagen (IMC). The muscle total RNA was extracted to determine the abundance of Col3a1 mRNA using relative quantitative RT-PCR with beta-actin mRNA as the internal standard. The results indicated that the developmental patterns of muscle Col3a1 mRNA in LW and LL pigs were similar. The abundance of Col3a1 mRNA increased with body weight, but decreased a little at 70 kg and 80 kg phases for LW and LL, respectively. On the whole, the expression level of Col3a1 mRNA in muscle of LW was higher than that of LL (P<0.05). Correlation analysis showed that the expression of Col3a1 mRNA in muscle was positively correlated with total and insoluble IMC, but was negatively correlated with IMC solubility for LW pigs (P<0.01) and LL pigs (P<0.05), respectively. These results suggest that the muscle Col3a1 gene expression is affected by body weight and genotype and has important effect on IMC content and characteristics.