ABSTRACT
Wide-bandgap metal halide perovskites have demonstrated promise in multijunction photovoltaic (PV) cells. However, photoinduced phase segregation and the resultant low open-circuit voltage (Voc) have greatly limited the PV performance of perovskite-based multijunction devices. Here, a alloying strategy is reported to achieve uniform distribution of triple cations and halides in wide-bandgap perovskites by doping Rb+ and Cl- with small ionic radii, which effectively suppresses halide phase segregation while promoting the homogenization of surface potential. Based on this strategy, a Voc of 1.33 V is obtained from single-junction perovskite solar cells, and a VOC approaching 3.0 V and a power conversion efficiency of 25.0% (obtained from reverse scan direction, certified efficiency: 24.19%) on an 1.04 cm2 photoactive area can be achieved in a perovskite/perovskite/c-Si triple-junction tandem cell, where the certification efficiency is by far the greatest performance of perovskite-based triple-junction tandem solar cells. This work overcomes the performance deadlock of perovskite-based triple-junction tandem cells by setting a materials-by-design paradigm.
ABSTRACT
Monolithic perovskite/silicon tandem solar cells have been attracted much attention in recent years. Despite their high performances, the stability issue of perovskite-based devices is recognized as one of the key challenges to realize industrial application. When comes to the perovskite top subcell, the interface between perovskite and electron transporting layers (usually C60) significantly affects the device efficiency as well as the stability due to their poor adhesion. Here, different from the conventional interfacial passivation using metal fluorides, a hybrid intermediate layer is proposed-PMMA functionalized with ionic liquid (IL)-is introduced at the perovskite/C60 interface. The application of PMMA essentially improves the interfacial stability due to its strong hydrophobicity, while adding IL relieves the charge accumulation between PMMA and the perovskite. Thus, an optimal wide-bandgap perovskite solar cells achieves power conversion efficiency of 20.62%. These cells are further integrated as top subcells with silicon bottom cells in a monolithic tandem structure, presenting an optimized PCE up to 27.51%. More importantly, such monolithic perovskite/silicon cells exhibit superior stability by maintaining 90% of initial efficiency after 1200 h under continuous illumination.
ABSTRACT
Perovskite/silicon tandem solar cells are promising avenues for achieving high-performance photovoltaics with low costs. However, the highest certified efficiency of perovskite/silicon tandem devices based on economically matured silicon heterojunction technology (SHJ) with fully textured wafer is only 25.2% due to incompatibility between the limitation of fabrication technology which is not compatible with the production-line silicon wafer. Here, a molecular-level nanotechnology is developed by designing NiOx /2PACz ([2-(9H-carbazol-9-yl) ethyl]phosphonic acid) as an ultrathin hybrid hole transport layer (HTL) above indium tin oxide (ITO) recombination junction, to serve as a vital pivot for achieving a conformal deposition of high-quality perovskite layer on top. The NiOx interlayer facilitates a uniform self-assembly of 2PACz molecules onto the fully textured surface, thus avoiding direct contact between ITO and perovskite top-cell for a minimal shunt loss. As a result of such interfacial engineering, the fully textured perovskite/silicon tandem cells obtain a certified efficiency of 28.84% on a 1.2-cm2 masked area, which is the highest performance to date based on the fully textured, production-line compatible SHJ. This work advances commercially promising photovoltaics with high performance and low costs by adopting a meticulously designed HTL/perovskite interface.
ABSTRACT
The rational design and construction of the efficient and robust non-noble metal bifunctional oxygen electrocatalysts is of critical significance due to the attention given to reversible metal-air batteries. In this paper, we report novel two-dimensional "senbei"-like Co9S8/CeO2/Co-NC nitrogen-doped carbon nanosheets (Co9S8/CeO2/Co-NC) derived from a unique 2D Co/Ce bimetallic ZIF. The phase transition from 3D spherical Co-ZIF to 2D Co/Ce-ZIF was achieved through the introduction of Ce ions. Profiting from the successful construction of the unique Co9S8/CeO2 heterostructure and the synergetic effect of two components, the as-prepared Co9S8/CeO2/Co-NC exhibited excellent electro-performance in both the oxygen evolution reaction (Ej=10 = 1.60 V) and oxygen reduction reaction (E1/2 = 0.875 V). Furthermore, when used as a bifunctional air electrode for Zn-air batteries, Co9S8/CeO2/Co-NC reached a high peak power density of ≈164.24 mW cm-2 at a high current density of ≈351 mA cm-2 and displayed an outstanding cycling stability of more than 668 h at 5 mA cm-2. This research provides new guidelines for preparing hybrid materials from cobalt-based sulfide species and CeO2 for electrocatalysis and energy storage or other fields.
