LILRB2 inhibition enhances radiation sensitivity in non-small cell lung cancer by attenuating radiation-induced senescence.

Radiotherapy (RT) in non-small cell lung cancer (NSCLC) triggers cellular senescence, complicating tumor microenvironments and affecting treatment outcomes. This study examines the role of lymphocyte immunoglobulin-like receptor B2 (LILRB2) in modulating RT-induced senescence and radiosensitivity in NSCLC. Through methodologies including irradiation, lentivirus transfection, and various molecular assays, we assessed LILRB2's expression and its impact on cellular senescence levels and tumor cell behaviors. Our findings reveal that RT upregulates LILRB2, facilitating senescence and a senescence-associated secretory phenotype (SASP), which in turn enhances tumor proliferation and resistance to radiation. Importantly, LILRB2 silencing attenuates these effects by inhibiting the JAK2/STAT3 pathway, significantly increasing radiosensitivity in NSCLC models. Clinical data correlate high LILRB2 expression with reduced RT response and poorer prognosis, suggesting LILRB2's pivotal role in RT-induced senescence and its potential as a therapeutic target to improve NSCLC radiosensitivity.

Seismic Damage and Behavior Assessment of Drift-Hardening Concrete Walls Reinforced by LBUHS Bars.

This paper experimentally and analytically investigated the damage and seismic behavior of concrete walls reinforced by low-bond ultra-high-strength (LBUHS) bars. To this end, four half-scale rectangular concrete walls were fabricated and tested under reversed cyclic loading and constant axial compression. The test variables were the shear span ratio and the axial load ratio. Based on the test results, the propagation of cracks on the wall surface, the maximum strain capacity of concrete, the hysteresis loops and envelope curves, the residual drifts, and the strain distributions of LBUHS rebars were presented and discussed. The experimental results showed that all the test walls could exhibit drift-hardening capability until at least a 2.0% drift ratio if LBUHS rebars were anchored by nuts at their ends. The test results also indicated that the maximum strain capacity of concrete was above 0.86%, much larger than the currently recommended 0.4%. After unloading from the transient drift ratios of 2.0% and 2.5% for the walls with shear span ratios of 1.5 and 2.0, respectively, the measured residual drift ratios were controlled below 0.4%, which is less than the critical drift ratio (0.5%) having 98% repairable probability recommended in the FEMA document (P-58) for general concrete structures. Furthermore, a numerical method was presented to evaluate the cyclic response of the test walls, and a comparison between the experimental and the calculated results verified the reliability and accuracy of the proposed numerical method.

Stretchable and Breathable Electroluminescent Displays Based on Ultrathin Nanocomposite Designs.

Stretchable electroluminescent devices represent an emerging optoelectronic technology for future wearables. However, their typical construction on sub-millimeter-thick elastomers has limited moisture permeability, leading to discomfort during long-term skin attachment. Although breathable textile displays may partially address this issue, they often have distinct visual appearances with discrete emissions from fibers or fiber junctions. This study introduces a convenient procedure to create stretchable, permeable displays with continuous luminous patterns. The design utilizes ultrathin nanocomposite devices embedded in a porous elastomeric microfoam to achieve high moisture permeability. These displays also exhibit excellent deformability, low-voltage operation, and excellent durability. Additionally, the device is decorated with fluorinated silica nanoparticles to achieve self-cleaning and washable capabilities. The practical implementation of these nanocomposite devices is demonstrated by creating an epidermal counter display that allows intimate integration with the human body. These developments provide an effective design of stretchable and breathable displays for comfortable wearing.

Multifunctional Nanocomposite Yield-Stress Fluids for Printable and Stretchable Electronics.

Compliant materials are crucial for stretchable electronics. Stretchable solids and gels have limitations in deformability and durability, whereas active liquids struggle to create complex devices. This study presents multifunctional yield-stress fluids as printable ink materials to construct stretchable electronic devices. Ionic nanocomposites comprise silica nanoparticles and ion liquids, while electrical nanocomposites use the natural oxidation of liquid metals to produce gallium oxide nanoflake additives. These nanocomposite inks can be printed on an elastomer substrate and stay in a solid state for easy encapsulation. However, their transition into a liquid state during stretching allows ultrahigh deformability up to the fracture strain of the elastomer. The ionic inks produce strain sensors with high stretchability and temperature sensors with high sensitivity of 7% °C-1. Smart gloves are further created by integrating these sensors with printed electrical interconnects, demonstrating bimodal detection of temperatures and hand gestures. The nanocomposite yield-stress fluids combine the desirable qualities of solids and liquids for stretchable devices and systems.

GhVIM28, a negative regulator identified from VIM family genes, positively responds to salt stress in cotton.

The VIM (belonged to E3 ubiquitin ligase) gene family is crucial for plant growth, development, and stress responses, yet their role in salt stress remains unclear. We analyzed phylogenetic relationships, chromosomal localization, conserved motifs, gene structure, cis-acting elements, and gene expression patterns of the VIM gene family in four cotton varieties. Our findings reveal 29, 29, 17, and 14 members in Gossypium hirsutum (G.hirsutum), Gossypium barbadense (G.barbadense), Gossypium arboreum (G.arboreum), and Gossypium raimondii (G. raimondii), respectively, indicating the maturity and evolution of this gene family. motifs among GhVIMs genes were observed, along with the presence of stress-responsive, hormone-responsive, and growth-related elements in their promoter regions. Gene expression analysis showed varying patterns and tissue specificity of GhVIMs genes under abiotic stress. Silencing GhVIM28 via virus-induced gene silencing revealed its role as a salt-tolerant negative regulator. This work reveals a mechanism by which the VIM gene family in response to salt stress in cotton, identifying a potential negative regulator, GhVIM28, which could be targeted for enhancing salt tolerance in cotton. The objective of this study was to explore the evolutionary relationship of the VIM gene family and its potential function in salt stress tolerance, and provide important genetic resources for salt tolerance breeding of cotton.

Dualistic insulator states in 1T-TaS2 crystals.

While the monolayer sheet is well-established as a Mott-insulator with a finite energy gap, the insulating nature of bulk 1T-TaS2 crystals remains ambiguous due to their varying dimensionalities and alterable interlayer coupling. In this study, we present a unique approach to unlock the intertwined two-dimensional Mott-insulator and three-dimensional band-insulator states in bulk 1T-TaS2 crystals by structuring a laddering stack along the out-of-plane direction. Through modulating the interlayer coupling, the insulating nature can be switched between band-insulator and Mott-insulator mechanisms. Our findings demonstrate the duality of insulating nature in 1T-TaS2 crystals. By manipulating the translational degree of freedom in layered crystals, our discovery presents a promising strategy for exploring fascinating physics, independent of their dimensionality, thereby offering a "three-dimensional" control for the era of slidetronics.

Liquid Metal-Enabled Epidermal Interfaces.

Soft materials are crucial for epidermal interfaces in biomedical devices due to their capability to conform to the body compared to rigid inorganic materials. Gels, liquids, and polymers have been extensively explored, but they lack sufficient electrical and thermal conductivity required for many application settings. Gallium-based alloys are molten metals at room temperature with exceptional electrical and thermal conductivity. These liquid metals and their composites can be directly applied onto the skin as interface materials. In this Spotlight on Applications, we focus on the rapidly evolving field of liquid metal-enabled epidermal interfaces featuring unique physical properties beyond traditional gels and polymers. We delve into the role of liquid metal in electrical and thermal biointerfaces in various epidermal applications. Current challenges and future directions in this active area are also discussed.

ILT4 facilitates angiogenesis in non-small cell lung cancer.

Antiangiogenic therapy targeting VEGF-A has become the standard of first-line therapy for non-small cell lung cancer (NSCLC). However, its clinical response rate is still less than 50%, and most patients eventually develop resistance, even when using combination therapy with chemotherapy. The major cause of resistance is the activation of complex bypass signals that induce angiogenesis and tumor progression. Therefore, exploring novel proangiogenic mechanisms and developing promising targets for combination therapy are crucial for improving the efficacy of antiangiogenic therapy. Immunoglobulin-like transcript (ILT) 4 is a classic immunosuppressive molecule that inhibits myeloid cell activation. Recent studies have shown that tumor cell-derived ILT4 drives tumor progression via the induction of malignant biologies and creation of an immunosuppressive microenvironment. However, whether and how ILT4 participates in NSCLC angiogenesis remain elusive. Herein, we found that enriched ILT4 in NSCLC is positively correlated with high microvessel density, advanced disease, and poor overall survival. Tumor cell-derived ILT4 induced angiogenesis both in vitro and in vivo and tumor progression and metastasis in vivo. Mechanistically, ILT4 was upregulated by its ligand angiopoietin-like protein 2 (ANGPTL2). Their interaction subsequently activated the ERK1/2 signaling pathway to increase the secretion of the proangiogenic factors VEGF-A and MMP-9, which are responsible for NSCLC angiogenesis. Our study explored a novel mechanism for ILT4-induced tumor progression and provided a potential target for antiangiogenic therapy in NSCLC.

PD-(L)1 inhibitors plus bevacizumab and chemotherapy as first-line therapy in PD-L1-negative metastatic lung adenocarcinoma: a real-world data.

BACKGROUND: Chemotherapy combined with immune checkpoint inhibitors (IC), bevacizumab (BC), or both (IBC) is the preferred first-line therapy for PD-L1-negative and oncogenic-driver wild-type metastatic lung adenocarcinoma. However, the optimal strategy is still undetermined. METHODS: This retrospective study enrolled PD-L1-negative metastatic lung adenocarcinoma patients from four cancer centers between January 1, 2018 and June 30, 2022. All the patients received IC, BC, or IBC as the first-line therapies. The efficacy and safety were evaluated. RESULTS: A total of 205 patients were included, with 60, 83, and 62 patients in IC, BC, and IBC groups, respectively. The baseline characteristics among three groups were well balanced. Patients treated with IBC had the highest objective response rate (ORR) (43.5%) and disease control rate (DCR) (100%) relative to those treated with IC (40.4%, 84.2%) or BC (40.5%, 96.2%) (ORR: P = 0.919, DCR: P < 0.01). Compared with the IC (6.74 m) or BC (8.28 m), IBC treatment significantly improved median progression-free survival (mPFS) (9.53 m, P = 0.005). However, no difference in overall survival (OS) was observed. When stratified by different clinical and molecular information, we found that male gender, ever smoking, wild-type genes mutations, and adrenal metastasis predict superior PFS benefit when treated with IBC. In patients with liver metastasis, IBC or BC treatment displayed better PFS compared with IC. No additional adverse reactions were observed in IBC group compared with other two groups. CONCLUSION: Combined IBC treatment achieved superior DCR and PFS compared with IC or BC in patients with PD-L1-negative metastatic lung adenocarcinoma, while did not increase the adverse events.

Superconductivity and Charge-Density-Wave-Like Transition in Th2Cu4As5.

We report the synthesis, crystal structure, and physical properties of a novel ternary compound, Th2Cu4As5. The material crystallizes in a tetragonal structure with lattice parameters a = 4.0639(3) Å and c = 24.8221(17) Å. Its structure can be described as an alternating stacking of fluorite-type Th2As2 layers with antifluorite-type double-layered Cu4As3 slabs. The measurement of electrical resistivity, magnetic susceptibility, and specific heat reveals that Th2Cu4As5 undergoes bulk superconducting transition at 4.2 K. Additionally, all these physical quantities exhibit anomalies at 48 K, accompanied by a sign change in the Hall coefficient, suggesting a charge-density-wave-like (CDW) phase transition. Drawing from both experimental data and band calculations, we propose that the superconducting and CDW-like phase transitions are, respectively, associated with the Cu4As3 slabs and the As plane in the Th2As2 layers.

Stretchable and Sweat-Wicking Patch for Skin-Attached Colorimetric Analysis of Sweat Biomarkers.

Stretchable sweat sensors are promising technology that can acquire biomolecular insights for health and fitness monitoring by intimate integration with the body. However, current sensors often require microfabricated microfluidic channels to control sweat flow during lab-on-body analysis, which makes effective and affordable sweat sampling a significant practical challenge. Here, we present stretchable and sweat-wicking patches that utilize bioinspired smart wettable membranes for the on-demand manipulation of sweat flow. In a scalable process, the membrane is created by stacking hydrophobic elastomer nanofibers onto soft microfoams with predefined two-dimensional superhydrophobic and superhydrophilic patterns. The engineered heterogeneous wettability distribution allows these porous membranes to achieve enhanced extraction and selective collection of sweat in embedded assays. Despite the simplified architecture, the color reactions between sweat and chemical indicators are inhibited from directly contacting the skin to achieve a largely improved operation safety. The sensing patches can simultaneously quantify pH, urea, and calcium in sweat through digital colorimetric analysis with smartphone images. The construction with all compliant materials renders these patches soft and stretchy to achieve conformal attachment to the skin. Successfully analyzing sweat compositions after physical exercises illustrates the practical suitability of these skin-attachable sensors for health tracking and point-of-care diagnosis.

Endotaxial stabilization of 2D charge density waves with long-range order.

Charge density waves are emergent quantum states that spontaneously reduce crystal symmetry, drive metal-insulator transitions, and precede superconductivity. In low-dimensions, distinct quantum states arise, however, thermal fluctuations and external disorder destroy long-range order. Here we stabilize ordered two-dimensional (2D) charge density waves through endotaxial synthesis of confined monolayers of 1T-TaS2. Specifically, an ordered incommensurate charge density wave (oIC-CDW) is realized in 2D with dramatically enhanced amplitude and resistivity. By enhancing CDW order, the hexatic nature of charge density waves becomes observable. Upon heating via in-situ TEM, the CDW continuously melts in a reversible hexatic process wherein topological defects form in the charge density wave. From these results, new regimes of the CDW phase diagram for 1T-TaS2 are derived and consistent with the predicted emergence of vestigial quantum order.

Recent progress in critical electrode and electrolyte materials for flexible zinc-ion batteries.

With the increasing popularity of flexible and wearable electronic devices, the demand for power supplies that can be easily bent or worn is also rapidly growing. However, traditional lithium ion batteries are difficult to adapt to complex wearable devices because of their unsatisfactory flexibility and thickness as well as safety issues. Zinc-ion batteries have several advantages, including low redox potential, high theoretical capacity, high safety, and abundant reserves. These features make flexible zinc-ion batteries (FZIBs) an ideal wearable energy storage device candidate. The electrochemical performance and mechanical deformability of FZIBs were pivotally determined based on the properties of their electrode and electrolyte. Herein, we summarize some recent advances from 2015 to 2023 in the design and preparation of various electrode and electrolyte materials for FZIBs with controllable morphology and structure, excellent mechanical property, and enhanced electrochemical performance. Moreover, efforts to explore the potential practical applications of FZIBs have also been considered. Finally, we present and discuss current challenges and opportunities for the development of high-performance FZIBs.

Efficacy of first-line treatment options beyond RET-TKIs in advanced RET-rearranged non-small cell lung cancer: A multi-center real-world study.

BACKGROUND: Although RET-tyrosine kinase inhibitors (RET-TKIs) are the preferred first-line therapy for advanced RET-arranged NSCLC, most patients cannot afford them. In this population, bevacizumab, immunotherapy, and chemotherapy are the most commonly used regimens. However, the optimal scheme beyond RET-TKIs has not been defined in the first-line setting. METHODS: This retrospective study included 86 stage IV NSCLC patients harboring RET rearrangement from six cancer centers between May 2017 and October 2022. RET-TKIs, chemotherapy, or one of the combination therapies (including immune checkpoint inhibitor (ICI) combined with chemotherapy (I + C), bevacizumab combined with chemotherapy (B + C), ICI and bevacizumab combined with chemotherapy (I + B + C)), were used as the first-line therapeutics. The clinical outcomes and safety were evaluated. RESULTS: Fourteen of the 86 patients received RET-TKIs, 57 received combination therapies, and 15 received chemotherapy alone. Their medium PFS (mPFS) were 16.92 months (95% CI: 5.9-27.9 months), 8.7 months (95% CI: 6.5-11.0 months), and 5.55 months (95% CI: 2.4-8.7 months) respectively. Among all the combination schemes, B + C (p = 0.007) or I + B + C (p = 0.025) gave beneficial PFS compared with chemotherapy, while I + C treatment (p = 0.169) generated comparable PFS with chemotherapy. In addition, I + B + C treatment had a numerically longer mPFS (12.21 months) compared with B + C (8.74 months) or I + C (7.89 months) schemes. In terms of safety, I + B + C treatment led to the highest frequency of hematological toxicity (50%) and vomiting (75%), but no ≥G3 adverse effect was observed. CONCLUSIONS: I + B + C might be a preferred option beyond RET-TKIs in the first-line therapy of RET-arranged NSCLC. Combination with Bevacizumab rather than with ICIs offered favorable survival compared with chemotherapy alone.

Stretchable and Smart Wettable Sensing Patch with Guided Liquid Flow for Multiplexed in Situ Perspiration Analysis.

Stretchable sweat sensors have become a personalized wearable platform for continuous, noninvasive health monitoring through conformal integration with the human body. Typically, these devices are coupled with soft microfluidic systems to control sweat flow during advanced analysis processes. However, the implementation of these soft microfluidic devices is limited by their high fabrication costs and the need for skin adhesives to block natural perspiration. To overcome these limitations, a stretchable and smart wettable patch has been proposed for multiplexed in situ perspiration analysis. The patch includes a porous membrane in the form of a patterned microfoam and a nanofiber layer laminate, which extracts sweat selectively from the skin and directs its continuous flow across the device. The integrated electrochemical sensor array measures multiple biomarkers simultaneously such as pH, K+, and Na+. The soft sensing patch comprises compliant materials and structures that allow deformability of up to 50% strain, which enables a stable and seamless interface with the curvilinear human body. During continuous physical exercise, the device has demonstrated a special operating mode by actively accumulating sweat from the skin for multiplex electrochemical analysis of biomarker profiles. The smart wettable membrane provides an affordable solution to address the sampling challenges of in situ perspiration analysis.

A Generic Strategy to Create Mechanically Interlocked Nanocomposite/Hydrogel Hybrid Electrodes for Epidermal Electronics.

Stretchable electronics are crucial enablers for next-generation wearables intimately integrated into the human body. As the primary compliant conductors used in these devices, metallic nanostructure/elastomer composites often struggle to form conformal contact with the textured skin. Hybrid electrodes have been consequently developed based on conductive nanocomposite and soft hydrogels to establish seamless skin-device interfaces. However, chemical modifications are typically needed for reliable bonding, which can alter their original properties. To overcome this limitation, this study presents a facile fabrication approach for mechanically interlocked nanocomposite/hydrogel hybrid electrodes. In this physical process, soft microfoams are thermally laminated on silver nanowire nanocomposites as a porous interface, which forms an interpenetrating network with the hydrogel. The microfoam-enabled bonding strategy is generally compatible with various polymers. The resulting interlocked hybrids have a 28-fold improved interfacial toughness compared to directly stacked hybrids. These electrodes achieve firm attachment to the skin and low contact impedance using tissue-adhesive hydrogels. They have been successfully integrated into an epidermal sleeve to distinguish hand gestures by sensing muscle contractions. Interlocked nanocomposite/hydrogel hybrids reported here offer a promising platform to combine the benefits of both materials for epidermal devices and systems.

Efficacy and safety of pralsetinib in Chinese advanced RET-mutant medullary thyroid cancer patients.

Pralsetinib has demonstrated efficacious activity in various solid tumors, including medullary thyroid cancer (MTC), as observed in the phase 1/2 global ARROW study (BLU-667-1101; NCT03037385). We evaluated the safety and efficacy of pralsetinib in Chinese patients with advanced RET-mutant MTC. In the extension cohort of ARROW, adult patients with advanced MTC, who had not received systemic therapy (except for cytotoxic chemotherapy), were treated with pralsetinib (400 mg once daily, orally). The primary endpoints were blinded independent central-reviewed (BICR) objective response rate (ORR) and safety. Between October 9, 2019, and April 29, 2020, 34 patients were enrolled at 12 centers across China. Among them, 28 patients tested positive for RET mutations in the central laboratory, and 26 of these, with measurable disease at baseline per BICR, were included in the analysis set for tumor response. As of April 12, 2021 (data cutoff), the ORR was 73.1% (95% CI: 52.2-88.4), and the median duration of response was not reached. The most common (≥15%) grade ≥3 treatment-related adverse events (TRAEs) in the 28 patients with RET-mutant MTC were neutrophil count decreased (8/28, 28.6%), blood creatine phosphokinase increased (6/28, 21.4%), and lymphocyte count decreased (5/28, 17.9%). Serious TRAEs were reported by six patients (21.4%), with the most common event being pneumonia (3/28, 10.7%). No patient discontinued treatment or died from pralsetinib-related adverse events. Pralsetinib demonstrated broad, deep, and durable efficacy, as well as a manageable and acceptable safety profile in Chinese patients with advanced RET-mutant MTC.

Porous Microneedles Through Direct Ink Drawing with Nanocomposite Inks for Transdermal Collection of Interstitial Fluid.

Interstitial fluid (ISF) is an attractive alternative to regular blood sampling for health checks and disease diagnosis. Porous microneedles (MNs) are well suited for collecting ISF in a minimally invasive manner. However, traditional methods of molding MNs from microfabricated templates involve prohibitive fabrication costs and fixed designs. To overcome these limitations, this study presents a facile and economical additive manufacturing approach to create porous MNs. Compared to traditional layerwise build sequences, direct ink drawing with nanocomposite inks can define sharp MNs with tailored shapes and achieve vastly improved fabrication efficiency. The key to this fabrication strategy is the yield-stress fluid ink that is easily formulated by dispersing silica nanoparticles into the cellulose acetate polymer solution. As-printed MNs are solidified into interconnected porous microstructure inside a coagulation bath of deionized water. The resulting MNs exhibit high mechanical strength and high porosity. This approach also allows porous MNs to be easily integrated on various substrates. In particular, MNs on filter paper substrates are highly flexible to rapidly collect ISF on non-flat skin sites. The extracted ISF is used for quantitative analysis of biomarkers, including glucose, = calcium ions, and calcium ions. Overall, the developments allow facile fabrication of porous MNs for transdermal diagnosis and therapy.

Surface Modification Driven Initial Coulombic Efficiency and Rate Performance Enhancement of Li1.2 Mn0.54 Ni0.13 Co0.13 O2 Cathode.

Due to its high energy density and low cost, Li-rich Mn-based layered oxides are considered potential cathode materials for next generation Li-ion batteries. However, they still suffer from the serious obstacle of low initial Coulombic efficiency, which is detrimental to their practical application. Here, an efficient surface modification method via NH4 H2 PO4 assisted pyrolysis is performed to improve the Coulombic efficiency of Li1.2 Mn0.54 Ni0.13 Co0.13 O2 , where appropriate oxygen vacancies, Li3 PO4 and spinel phase are synchronously generated in the surface layer of LMR microspheres. Under the synergistic effect of the oxygen vacancies and spinel phase, the unavoidable oxygen release in the cycling process was effectively suppressed. Moreover, the induced Li3 PO4 nanolayer could boost the lithium-ion diffusion and mitigate the dissolution of transition metal ions, especially manganese ions, in the material. The optimally modified sample yielded an impressive initial Coulombic efficiency and outstanding rate performance.

Two Birds with One Stone: V4 C3 MXene Synergistically Promoted VS2 Cathode and Zinc Anode for High-Performance Aqueous Zinc-Ion Batteries.

Aqueous zinc-ion batteries (AZIBs) are considered to be a rising star in the large-scale energy storage area because of their low cost and environmental friendliness properties. However, the limited electrochemical performance of the cathode and severe zinc dendrite of the anode severely hinder the practical application of AZIBs. Herein, a novel 3D interconnected VS2 ⊥V4 C3 Tx heterostructure material is prepared via one-step solvothermal method. Morphological and structural characterizations show that VS2 nanosheets are uniformly and dispersedly distributed on the surface of the V4 C3 MXene substrate, which can effectively suppress volume change of the VS2 . Owing to the open heterostructure along with the high conductivity of V4 C3 MXene, the VS2 ⊥V4 C3 Tx cathode shows a high specific capacity of 273.9 mAh g-1 at 1 A g-1 and an excellent rate capability of 143.2 mAh g-1 at 20 A g-1 . The V4 C3 MXene can also effectively suppress zinc dendrite growth when used as protective layer for the Zn anode, making the V4 C3 Tx @Zn symmetric cell with a stable voltage profile for ≈1700 h. Benefitting from the synergistic modification effect of V4 C3 MXene on both the cathode and anode, the VS2 ⊥V4 C3 Tx ||V4 C3 Tx @Zn battery exhibits a long cycling lifespan of 5000 cycles with a capacity of 157.1 mAh g-1 at 5A g-1 .