Zwitterionic Cellulose-based Polymer Electrolyte Enabled by Aqueous Solution Casting for High-performance Solid-state Batteries.

Polyethylene oxide (PEO)-based solid-state batteries hold great promise as the next-generation batteries with high energy density and high safety. However, PEO-based electrolytes encounter certain limitations, including inferior ionic conductivity, low Li+ transference number, and poor mechanical strength. Herein, we aim to simultaneously address these issues by utilizing one-dimensional zwitterionic cellulose nanofiber (ZCNF) as fillers for PEO-based electrolytes using a simple aqueous solution casting method. Multiple characterizations and theoretical calculations demonstrate that the unique zwitterionic structure imparts ZCNF with various functions, such as disrupting PEO crystallization, dissociating lithium salts, anchoring anions through cationic groups, accelerating Li+ migration by anionic groups, as well as its inherent reinforcement effect. As a result, the prepared PL-ZCNF electrolyte exhibits remarkable ionic conductivity (5.37 × 10-4 S cm-1) and Li+ transference number (0.62) at 60 °C without sacrificing mechanical strength (9.2 MPa), together with high critical current density of 1.1 mA cm-2. Attributed to these merits of PL-ZCNF, the LiFePO4|PL-ZCNF|Li solid-state full-cell delivers exceptional rate capability and cycling performance (900 cycles at 5 C). Notably, the assembled pouch-cell can maintain steady operation over 1000 cycles with an impressive 93.7% capacity retention at 0.5 C and 60 °C, highlighting the great potential of PL-ZCNF for practical applications.

Engineering Covalent Organic Frameworks Toward Advanced Zinc-Based Batteries.

Zinc-based batteries (ZBBs) have demonstrated considerable potential among secondary batteries, attributing to their advantages including good safety, environmental friendliness, and high energy density. However, ZBBs still suffer from issues such as the formation of zinc dendrites, occurrence of side reactions, retardation of reaction kinetics, and shuttle effects, posing a great challenge for practical applications. As promising porous materials, covalent organic frameworks (COFs) and their derivatives have rigid skeletons, ordered structures, and permanent porosity, which endow them with great potential for application in ZBBs. This review, therefore, provides a systematic overview detailing on COFs structure pertaining to electrochemical performance of ZBBs, following an in depth discussion of the challenges faced by ZBBs, which includes dendrites and side reactions at the anode, as well as dissolution, structural change, slow kinetics, and shuttle effect at the cathode. Then, the structural advantages of COF-correlated materials and their roles in various ZBBs are highlighted. Finally, the challenges of COF-correlated materials in ZBBs are outlined and an outlook on the future development of COF-correlated materials for ZBBs is provided. The review would serve as a valuable reference for further research into the utilization of COF-correlated materials in ZBBs.

Self-assembled hydrated copper coordination compounds as ionic conductors for room temperature solid-state batteries.

As the core component of solid-state batteries, neither current inorganic solid-state electrolytes nor solid polymer electrolytes can simultaneously possess satisfactory ionic conductivity, electrode compatibility and processability. By incorporating efficient Li+ diffusion channels found in inorganic solid-state electrolytes and polar functional groups present in solid polymer electrolytes, it is conceivable to design inorganic-organic hybrid solid-state electrolytes to achieve true fusion and synergy in performance. Herein, we demonstrate that traditional metal coordination compounds can serve as exceptional Li+ ion conductors at room temperature through rational structural design. Specifically, we synthesize copper maleate hydrate nanoflakes via bottom-up self-assembly featuring highly-ordered 1D channels that are interconnected by Cu2+/Cu+ nodes and maleic acid ligands, alongside rich COO- groups and structural water within the channels. Benefiting from the combination of ion-hopping and coupling-dissociation mechanisms, Li+ ions can preferably transport through these channels rapidly. Thus, the Li+-implanted copper maleate hydrate solid-state electrolytes shows remarkable ionic conductivity (1.17 × 10-4 S cm-1 at room temperature), high Li+ transference number (0.77), and a 4.7 V-wide operating window. More impressively, Li+-implanted copper maleate hydrate solid-state electrolytes are demonstrated to have exceptional compatibility with both cathode and Li anode, enabling long-term stability of more than 800 cycles. This work brings new insight on exploring superior room-temperature ionic conductors based on metal coordination compounds.

Solid-State Lithium Batteries with Ultrastable Cyclability: An Internal-External Modification Strategy.

A commonly used strategy to tackle the unstable interfacial problem between Li1.3Al0.3Ti1.7(PO4)3 (LATP) and lithium (Li) is to introduce an interlayer. However, this strategy has a limited effect on stabilizing LATP during long-term cycling or under high current density, which is due in part to the negative impact of its internal defects (e.g., gaps between grains (GBs)) that are usually neglected. Here, control experiments and theoretical calculations show clearly that the GBs of LATP have higher electronic conductivity, which significantly accelerates its side reactions with Li. Thus, a simple LiCl solution immersion method is demonstrated to modify the GBs and their electronic states, thereby stabilizing LATP. In addition to LiCl filling, composite solid polymer electrolyte (CSPE) interlayering is concurrently introduced at the Li/LATP interface to realize the internal-external dual modifications for LATP. As a result, electron leakage in LATP can be strictly inhibited from its interior (by LiCl) and exterior (by CSPE), and such dual modifications can well protect the Li/LATP interface from side reactions and Li dendrite penetration. Notably, thus-modified Li symmetrical cells can achieve ultrastable cycling for more than 3500 h at 0.4 mA cm-2 and 1500 h at 0.6 mA cm-2, among the best cycling performance to date.

Resolving the Origins of Superior Cycling Performance of Antimony Anode in Sodium-ion Batteries: A Comparison with Lithium-ion Batteries.

Alloying-type antimony (Sb) with high theoretical capacity is a promising anode candidate for both lithium-ion batteries (LIBs) and sodium-ion batteries (SIBs). Given the larger radius of Na+ (1.02 Å) than Li+ (0.76 Å), it was generally believed that the Sb anode would experience even worse capacity degradation in SIBs due to more substantial volumetric variations during cycling when compared to LIBs. However, the Sb anode in SIBs unexpectedly exhibited both better electrochemical and structural stability than in LIBs, and the mechanistic reasons that underlie this performance discrepancy remain undiscovered. Here, using substantial in situ transmission electron microscopy, X-ray diffraction, and Raman techniques complemented by theoretical simulations, we explicitly reveal that compared to the lithiation/delithiation process, sodiation/desodiation process of Sb anode displays a previously unexplored two-stage alloying/dealloying mechanism with polycrystalline and amorphous phases as the intermediates featuring improved resilience to mechanical damage, contributing to superior cycling stability in SIBs. Additionally, the better mechanical properties and weaker atomic interaction of Na-Sb alloys than Li-Sb alloys favor enabling mitigated mechanical stress, accounting for enhanced structural stability as unveiled by theoretical simulations. Our finding delineates the mechanistic origins of enhanced cycling stability of Sb anode in SIBs with potential implications for other large-volume-change electrode materials.

Implanting Transition Metal into Li2 O-Based Cathode Prelithiation Agent for High-Energy-Density and Long-Life Li-Ion Batteries.

Compensating the irreversible loss of limited active lithium (Li) is essentially important for improving the energy-density and cycle-life of practical Li-ion battery full-cell, especially after employing high-capacity but low initial coulombic efficiency anode candidates. Introducing prelithiation agent can provide additional Li source for such compensation. Herein, we precisely implant trace Co (extracted from transition metal oxide) into the Li site of Li2 O, obtaining (Li0.66 Co0.11 □0.23 )2 O (CLO) cathode prelithiation agent. The synergistic formation of Li vacancies and Co-derived catalysis efficiently enhance the inherent conductivity and weaken the Li-O interaction of Li2 O, which facilitates its anionic oxidation to peroxo/superoxo species and gaseous O2 , achieving 1642.7 mAh/g~Li2O prelithiation capacity (≈980 mAh/g for prelithiation agent). Coupled 6.5 wt % CLO-based prelithiation agent with LiCoO2 cathode, substantial additional Li source stored within CLO is efficiently released to compensate the Li consumption on the SiO/C anode, achieving 270 Wh/kg pouch-type full-cell with 92 % capacity retention after 1000 cycles.

Simultaneous Catalytic Acceleration of White Phosphorus Polymerization and Red Phosphorus Potassiation for High-Performance Potassium-Ion Batteries.

Red phosphorus (P) as an anode material of potassium-ion batteries possesses ultra-high theoretical specific capacity (1154 mAh g-1 ). However, owing to residual white P during the preparation and sluggish kinetics of K-P alloying limit its practical application. Seeking an efficient catalyst to address the above problems is crucial for the secure preparation of red P anode with high performance. Herein, through the analysis of the activation energies in white P polymerization, it is revealed that the highest occupied molecular orbital energy of I2 (-7.40 eV) is in proximity to P4 (-7.25 eV), and the lowest unoccupied molecular orbital energy of I2 molecule (-4.20 eV) is lower than that of other common non-metallic molecules (N2 , S8 , Se8 , F2 , Cl2 , Br2 ). The introduction of I2 can thus promote the breaking of the P─P bond and accelerate the polymerization of white P molecules. Besides, the ab initio molecular dynamics simulations show that I2 can enhance the kinetics of P-K alloying. The as-obtained red P/C composites with I2 deliver excellent cycling stability (358 mAh g-1 after 1200 cycles at 1 A g-1 ). This study establishes catalysis as a promising pathway to tackle the challenges of P anode for alkali metal ion batteries.

Lattice Engineering on Li2CO3-Based Sacrificial Cathode Prelithiation Agent for Improving the Energy Density of Li-Ion Battery Full-Cell.

Developing sacrificial cathode prelithiation technology to compensate for active lithium loss is vital for improving the energy density of lithium-ion battery full-cells. Li2CO3 owns high theoretical specific capacity, superior air stability, but poor conductivity as an insulator, acting as a promising but challenging prelithiation agent candidate. Herein, extracting a trace amount of Co from LiCoO2 (LCO), a lattice engineering is developed through substituting Li sites with Co and inducing Li defects to obtain a composite structure consisting of (Li0.906Co0.043▫0.051)2CO2.934 and ball milled LiCoO2 (Co-Li2CO3@LCO). Notably, both the bandgap and Li─O bond strength have essentially declined in this structure. Benefiting from the synergistic effect of Li defects and bulk phase catalytic regulation of Co, the potential of Li2CO3 deep decomposition significantly decreases from typical >4.7 to ≈4.25 V versus Li/Li+, presenting >600 mAh g-1 compensation capacity. Impressively, coupling 5 wt% Co-Li2CO3@LCO within NCM-811 cathode, 235 Wh kg-1 pouch-type full-cell is achieved, performing 88% capacity retention after 1000 cycles.

Injecting Excess Na into a P2-Type Layered Oxide Cathode to Achieve Presodiation in a Na-Ion Full Cell.

The initial Na loss limits the theoretical specific capacity of cathodes in Na-ion full cell applications, especially for Na-deficient P2-type cathodes. In this study, we propose a presodiation strategy for cathodes to compensate for the initial Na loss in Na-ion full cells, resulting in a higher specific capacity and a higher energy density. By employing an electrochemical presodiation approach, we inject 0.32 excess active Na into P2-type Na0.67Li0.1Fe0.37Mn0.53O2 (NLFMO), aiming to compensate for the initial Na loss in hard carbon (HC) and the inherent Na deficiency of NLFMO. The structure of the NLFMO cathode converts from P2 to P'2 upon active Na injection, without affecting subsequent cycles. As a result, the HC||NLFMOpreNa full cell exhibits a specific capacity of 125 mAh/g, surpassing the value of 61 mAh/g of the HC||NLFMO full cell without presodiation due to the injected active Na. Moreover, the presodiation effect can be achieved through other engineering approaches (e.g., Na-metal contact), suggesting the scalability of this methodology.

High performance drilling of T800 CFRP composites by combining ultrasonic vibration and optimized drill structure.

Drilling of high-strength T800 carbon fiber reinforced plastic (CFRP) are widely employed in current aviation industry. Drilling-induced damages frequently occur and affect not only the load carrying capacity of components but also the reliability. As one of effective methods to reduce the drilling-induced damages, advanced tool structures have been widely used. Nevertheless, it is still difficult to realize high machining accuracy and efficiency by this method. This paper compared three different drill bits to evaluate the drilling performance of T800 CFRP composites and the results showed that the dagger drill was a good choice to drill T800 CFRP considering the lowest thrust force and damages. On this basis, ultrasonic vibration was successfully imposed on dagger drill to further improve the drilling performance. The experimental results showed that ultrasonic vibration reduced the thrust force and surface roughness with a maximum decrease of 14.1 % and 62.2 % respectively. Moreover, the maximum hole diameter errors were decreased from 30 µm in CD to 6 µm in UAD. Besides, the mechanisms of force reduction and hole quality improvement by ultrasonic vibration were also revealed. The results suggest that the combination of ultrasonic vibration and dagger drill is a promising strategy for high performance drilling CFRP.

In Situ Atomic-Scale Deciphering of Multiple Dynamic Phase Transformations and Reversible Sodium Storage in Ternary Metal Sulfide Anode.

Ternary metal sulfides (TMSs), endowed with the synergistic effect of their respective binary counterparts, hold great promise as anode candidates for boosting sodium storage performance. Their fundamental sodium storage mechanisms associated with dynamic structural evolution and reaction kinetics, however, have not been fully comprehended. To enhance the electrochemical performance of TMS anodes in sodium-ion batteries (SIBs), it is of critical importance to gain a better mechanistic understanding of their dynamic electrochemical processes during live (de)sodiation cycling. Herein, taking BiSbS3 anode as a representative paradigm, its real-time sodium storage mechanisms down to the atomic scale during the (de)sodiation cycling are systematically elucidated through in situ transmission electron microscopy. Previously unexplored multiple phase transformations involving intercalation, two-step conversion, and two-step alloying reactions are explicitly revealed during sodiation, in which newly formed Na2BiSbS4 and Na2BiSb are respectively identified as intermediate phases of the conversion and alloying reactions. Impressively, the final sodiation products of Na6BiSb and Na2S can recover to the original BiSbS3 phase upon desodiation, and afterward, a reversible phase transformation can be established between BiSbS3 and Na6BiSb, where the BiSb as an individual phase (rather than respective Bi and Sb phases) participates in reactions. These findings are further verified by operando X-ray diffraction, density functional theory calculations, and electrochemical tests. Our work provides valuable insights into the mechanistic understanding of sodium storage mechanisms in TMS anodes and important implications for their performance optimization toward high-performance SIBs.

Regulating the Wettability of Hard Carbon through Open Mesochannels for Enhanced K+ Storage.

Hard carbons are deemed as promising anode materials for high-performance potassium-ion battery, but their commercialization is still hindered by the insufficient K+ transfer kinetics and poor potassiophilicity. Herein, these issues are addressed by improving the wettability of hard carbon, which can be achieved by the introduction of open mesochannels. A series of such hollow mesoporous carbon capsules with different dimensions are synthesized, which exhibit markedly enhanced wettability with electrolyte compared to the microporous counterparts. Various characterizations confirm its effects on promoting the kinetics and potassiophilicity of as-synthesized carbons, which can be additionally improved by S-doping. As a result, the 2D mesoporous carbon anode exhibits excellent rate capability (122.2 mAh g-1 at 4 A g-1 ), high reversible capacity (396.6 mAh g-1 at 0.1 A g-1 after 200 cycles), and outstanding cycling stability (197.0 mAh g-1 at 2 A g-1 after 1400 cycles). In addition, the hollow mesoporous architecture can effectively buffer the volume expansion and thus stabilize the carbon anodes, as visualized by in situ transmission electron microscopy. This work provides new insight for enhanced K+ storage performance from the perspective of anode wettability with electrolyte, as well as a universal anode design that combines mesochannels architecture with heteroatom doping.

Deciphering Structural Origins of Highly Reversible Lithium Storage in High Entropy Oxides with In Situ Transmission Electron Microscopy.

Configurational entropy-stabilized single-phase high-entropy oxides (HEOs) have been considered revolutionary electrode materials with both reversible lithium storage and high specific capacity that are difficult to fulfill simultaneously by conventional electrodes. However, precise understanding of lithium storage mechanisms in such HEOs remains controversial due to complex multi-cationic oxide systems. Here, distinct reaction dynamics and structural evolutions in rocksalt-type HEOs upon cycling are carefully studied by in situ transmission electron microscopy (TEM) including imaging, electron diffraction, and electron energy loss spectroscopy at atomic scale. The mechanisms of composition-dependent conversion/alloying reaction kinetics along with spatiotemporal variations of valence states upon lithiation are revealed, characterized by disappearance of the original rocksalt phase. Unexpectedly, it is found from the first visualization evidence that the post-lithiation polyphase state can be recovered to the original rocksalt-structured HEOs via reversible and symmetrical delithiation reactions, which is unavailable for monometallic oxide systems. Rigorous electrochemical tests coupled with postmortem ex situ TEM and bulk-level phase analyses further validate the crucial role of structural recovery capability in ensuring the reversible high-capacity Li-storage in HEOs. These findings can provide valuable guidelines to design compositionally engineer HEOs for almighty electrodes of next-generation long-life energy storage devices.

A Review on 3D Zinc Anodes for Zinc Ion Batteries.

Zinc ion batteries (ZIBs) have been gradually developed in recent years due to their abundant resources, low cost, and environmental friendliness. Therefore, ZIBs have received a great deal of attention from researchers, which are considered as the next generation of portable energy storage systems. However, poor overall performance of ZIBs restricts their development, which is attributed to zinc dendrites and a series of side reactions. Constructing 3D zinc anodes has proven to be an effective way to significantly improve their electrochemical performance. In this review, the challenges of zinc anodes in ZIBs, including zinc dendrites, hydrogen evolution and corrosion, as well as passivation, are comprehensively summarized and the energy storage mechanisms of the zinc anodes and 3D zinc anodes are discussed. 3D zinc anodes with different structures including fiberous, porous, ridge-like structures, plated zinc anodes on different substrates and other 3D zinc anodes, are subsequently discussed in detail. Finally, emerging opportunities and perspectives on the material design of 3D zinc anodes are highlighted and challenges that need to be solved in future practical applications are discussed, hopefully illuminating the way forward for the development of ZIBs.

Enhanced Cyclability of Lithium Metal Anodes Enabled by Anti-aggregation of Lithiophilic Seeds.

Constructing 3D skeletons modified with lithiophilic seeds has proven effective in achieving dendrite-free lithium metal anodes. However, these lithiophilic seeds are mostly alloy- or conversion-type materials, and they tend to aggregate and redistribute during cycling, resulting in the failure of regulating Li deposition. Herein, we address this crucial but long-neglected issue by using intercalation-type lithiophilic seeds, which enable antiaggregation owing to their negligible volume expansion and high electrochemical stability against Li. To exemplify this, a 3D carbon-based host is built, in which ultrafine TiO2 seeds are uniformly embedded in nitrogen-doped hollow porous carbon spheres (N-HPCSs). The TiO2@N-HPCSs electrode exhibits superior Coulombic efficiency, high-rate capability, and long-term stability when evaluated as compertitive anodes for Li metal batteries. Furthermore, the superiority of intercalation-type seeds is comprehensively revealed through controlled experiments by various in situ/ex situ electron and optical microscopies, which highlights the excellent structural stability and lithiophilicity of TiO2 nanoseeds upon repeated cycling.

Effect of Interfacial Structure on Mechanical Properties of Graphene Reinforced Al2O3-WC Matrix Ceramic Composite.

The interfacial structures and interfacial bonding characteristics between graphene and matrix in graphene-reinforced Al2O3-WC matrix ceramic composite prepared by two-step hot pressing sintering were systematically investigated. Three interfacial structures including graphene-Al2O3, graphene-Al2OC and graphene-WC were determined in the Al2O3-WC-TiC-graphene composite by TEM. The interfacial adhesion energy and interfacial shear strength were calculated by first principles, and it has been found that the interfacial adhesion energy and interfacial shear strength of the graphene-Al2OC interface (0.287 eV/nm2, 59.32 MPa) were far lower than those of graphene-Al2O3 (0.967 eV/nm2, 395.77 MPa) and graphene-WC (0.781 eV/nm2, 229.84 MPa) interfaces. Thus, the composite with the strong and weak hybrid interfaces was successfully obtained, which was further confirmed by the microstructural analysis. This interfacial structure could induce strengthening mechanisms such as load transfer, grain refinement, etc., and toughening mechanisms such as crack bridging, graphene pull-out, etc., which effectively improved mechanical properties.

Reinforcing Mechanisms of Graphene and Nano-TiC in Al2O3-Based Ceramic-Tool Materials.

Graphene and nano-TiC, which have good reinforcing effects on Al2O3-based ceramic-tool materials, are generally used as additive phases for ceramics. In this study, nine kinds of samples were sintered, to investigate the effects of graphene and nano-TiC on the reinforcing mechanisms of Al2O3-based ceramics. The experimental results indicated that adding 0.5 vol% graphene and 10 vol% nano-TiC can obtain the optimum flexural strength, fracture toughness, and Vickers hardness, which were 705 ± 44 MPa, 7.4 ± 0.4 MPa m1/2, and 20.5 ± 0.8 GPa, respectively. Furthermore, the reinforcing mechanisms of crack bridging, pull-out of graphene, and pull-out of nano-TiC are identified, which are contributed to improving the mechanical properties of ceramics. Meanwhile, other reinforcing mechanisms induced by graphene (graphene break, crack guiding, and 3D propagation) and nano-TiC (crack branching, crack deflection, and peeling) are discussed. These reinforcing mechanisms are coupled together, while decoupling is hard to work out. Thus, further quantitative studies of reinforcing effects of graphene and nano-TiC on Al2O3-based ceramic-tool materials are necessary to be carried out.