Intrinsic room-temperature ferromagnetism in a two-dimensional semiconducting metal-organic framework.

The development of two-dimensional (2D) magnetic semiconductors with room-temperature ferromagnetism is a significant challenge in materials science and is important for the development of next-generation spintronic devices. Herein, we demonstrate that a 2D semiconducting antiferromagnetic Cu-MOF can be endowed with intrinsic room-temperature ferromagnetic coupling using a ligand cleavage strategy to regulate the inner magnetic interaction within the Cu dimers. Using the element-selective X-ray magnetic circular dichroism (XMCD) technique, we provide unambiguous evidence for intrinsic ferromagnetism. Exhaustive structural characterizations confirm that the change of magnetic coupling is caused by the increased distance between Cu atoms within a Cu dimer. Theoretical calculations reveal that the ferromagnetic coupling is enhanced with the increased Cu-Cu distance, which depresses the hybridization between 3d orbitals of nearest Cu atoms. Our work provides an effective avenue to design and fabricate MOF-based semiconducting room-temperature ferromagnetic materials and promotes their practical applications in next-generation spintronic devices.

Synergistic interface between metal Cu nanoparticles and CoO for highly efficient hydrogen production from ammonia borane.

The development of efficient non-noble metal catalysts for the dehydrogenation of hydrogen (H2) storage materials is highly desirable to enable the global production and storage of H2 energy. In this study, Cu x -(CoO)1-x /TiO2 catalysts with a Cu-CoO interface supported on TiO2 are shown to exhibit high catalytic efficiency for ammonia borane (NH3BH3) hydrolysis to generate H2. The best catalytic activity was observed for a catalyst with a Cu : Co molar ratio of 1 : 1. The highest dehydrogenation turnover frequency (TOF) of 104.0 molH2 molmetal -1 min-1 was observed in 0.2 M NaOH at room temperature, surpassing most of the TOFs reported for non-noble catalysts for NH3BH3 hydrolysis. Detailed characterisation of the catalysts revealed electronic interactions at the Cu-CoO heterostructured interface of the catalysts. This interface provides bifunctional synergetic sites for H2 generation, where activation and adsorption of NH3BH3 and H2O are accelerated on the surface of Cu and CoO, respectively. This study details an effective method of rationally designing non-noble metal catalysts for H2 generation via a metal and transition-metal oxide interface.

Atomically Thick Oxide Overcoating Stimulates Low-Temperature Reactive Metal-Support Interactions for Enhanced Catalysis.

Reactive metal-support interactions (RMSIs) induce the formation of bimetallic alloys and offer an effective way to tune the electronic and geometric properties of metal sites for advanced catalysis. However, RMSIs often require high-temperature reductions (>500 °C), which significantly limits the tuning of bimetallic compositional varieties. Here, we report that an atomically thick Ga2O3 coating of Pd nanoparticles enables the initiation of RMSIs at a much lower temperature of ∼250 °C. State-of-the-art microscopic and in situ spectroscopic studies disclose that low-temperature RMSIs initiate the formation of rarely reported Ga-rich PdGa alloy phases, distinct from the Pd2Ga phase formed in traditional Pd/Ga2O3 catalysts after high-temperature reduction. In the CO2 hydrogenation reaction, the Ga-rich alloy phases impressively boost the formation of methanol and dimethyl ether ∼5 times higher than that of Pd/Ga2O3. In situ infrared spectroscopy reveals that the Ga-rich phases greatly favor formate formation as well as its subsequent hydrogenation, thus leading to high productivity.

Conjugated dual size effect of core-shell particles synergizes bimetallic catalysis.

Core-shell bimetallic nanocatalysts have attracted long-standing attention in heterogeneous catalysis. Tailoring both the core size and shell thickness to the dedicated geometrical and electronic properties for high catalytic reactivity is important but challenging. Here, taking Au@Pd core-shell catalysts as an example, we disclose by theory that a large size of Au core with a two monolayer of Pd shell is vital to eliminate undesired lattice contractions and ligand destabilizations for optimum benzyl alcohol adsorption. A set of Au@Pd/SiO2 catalysts with various core sizes and shell thicknesses are precisely fabricated. In the benzyl alcohol oxidation reaction, we find that the activity increases monotonically with the core size but varies nonmontonically with the shell thickness, where a record-high activity is achieved on a Au@Pd catalyst with a large core size of 6.8 nm and a shell thickness of ~2-3 monolayers. These findings highlight the conjugated dual particle size effect in bimetallic catalysis.

Structural Evolution of Anatase-Supported Platinum Nanoclusters into a Platinum-Titanium Intermetallic Containing Platinum Single Atoms for Enhanced Catalytic CO Oxidation.

Strong metal-support interactions characteristic of the encapsulation of metal particles by oxide overlayers have been widely observed on large metal nanoparticles, but scarcely occur on small nanoclusters (<2 nm) for which the metal-support interactions remain elusive. Herein, we study the structural evolution of Pt nanoclusters (1.5 nm) supported on anatase TiO2 upon high-temperature H2 reduction. The Pt nanoclusters start to partially evolve into a CsCl-type PtTi intermetallic compound when the reduction temperature reaches 400 °C. Upon 700 °C reduction, the PtTi nanoparticles are exclusively formed and grow epitaxially along the TiO2 (101) crystal faces. The thermodynamics of the formation of PtTi via migration of reduced Ti atoms into Pt cluster is unraveled by theoretical calculations. The thermally stable PtTi intermetallic compound, with single-atom Pt isolated by Ti, exhibits enhanced catalytic activity and promoted catalytic durability for CO oxidation.

Monitoring Electron Flow in Nickel Single-Atom Catalysts during Nitrogen Photofixation.

An efficient catalytic system for nitrogen (N2) photofixation generally consists of light-harvesting units, active sites, and an electron-transfer bridge. In order to track photogenerated electron flow between different functional units, it is highly desired to develop in situ characterization techniques with element-specific capability, surface sensitivity, and detection of unoccupied states. In this work, we developed in situ synchrotron radiation soft X-ray absorption spectroscopy (in situ sXAS) to probe the variation of electronic structure for a reaction system during N2 photoreduction. Nickel single-atom and ceria nanoparticle comodified reduced graphene oxide (CeO2/Ni-G) was designed as a model catalyst. In situ sXAS directly reveals the dynamic interfacial charge transfer of photogenerated electrons under illumination and the consequent charge accumulation at the catalytic active sites for N2 activation. This work provides a powerful tool to monitor the electronic structure evolution of active sites under reaction conditions for photocatalysis and beyond.

Dehydrogenation of Ammonia Borane by Platinum-Nickel Dimers: Regulation of Heteroatom Interspace Boosts Bifunctional Synergetic Catalysis.

Regulation of the atom-atom interspaces of dual-atom catalysts is essential to optimize the dual-atom synergy to achieve high activity but remains challenging. Herein, we report an effective strategy to regulate the Pt1 -Ni1 interspace to achieve Pt1 Ni1 dimers and Pt1 +Ni1 heteronuclear dual-single-atom catalysts (HDSACs) by tailoring steric hindrance between metal precursors during synthesis. Spectroscopic characterization reveals obvious electron transfers in Pt1 Ni1 oxo dimers but not in Pt1 +Ni1 HDSAC. In the hydrolysis of ammonia borane (AB), the H2 formation rates show an inverse proportion to the Pt1 -Ni1 interspace. The rate of Pt1 Ni1 dimers is ≈13 and 2 times higher than those of Pt1 and Pt1 +Ni1 HDSAC, manifesting the interspace-dependent synergy. Theoretical calculations reveal that the bridging OH group in Pt1 Ni1 dimers promotes water dissociation, while Pt1 facilitates the cleavage of B-H bonds in AB, which boosts a bifunctional synergy to accelerate H2 production cooperatively.

Optimizing the synergy between alloy and alloy-oxide interface for CO oxidation in bimetallic catalysts.

Creating synergetic metal-oxide interfaces is a promising strategy to promote the catalytic performance of heterogeneous catalysts. However, this strategy has been mainly applied to monometallic catalysts, while scarcely applied to alloy catalysts. In this work, we present a comprehensive study on the synergetic alloy-oxide interfaces in the bimetallic Pt-Co/Al2O3 catalysts for CO oxidation. A series of Pt1Cox/Al2O3 catalysts with various Co/Pt molar ratios with x ranging from 0.5 to 3.8 was synthesized via a facile wet-chemistry strategy. Among them, the Pt1Co0.5/Al2O3 catalyst exhibits the best catalytic performance for CO oxidation, with the lowest CO complete conversion temperature of -10 °C and the highest mass specific rate of 2.61 (mol CO) h-1 (g Pt)-1. From in situ X-ray absorption fine structure and diffuse reflectance infrared Fourier-transform spectroscopy studies, the superior catalytic performance of Pt1Co0.5/Al2O3 originates from the optimal length of the three-dimensional alloy-oxide perimeter sites. We further extended this strategy to other bimetallic systems of Pt-Fe and Pt-Ni, which also show similar structural properties and remarkable promotional effects on the catalytic activity.

Engineering a local acid-like environment in alkaline medium for efficient hydrogen evolution reaction.

Tuning the local reaction environment is an important and challenging issue for determining electrochemical performances. Herein, we propose a strategy of intentionally engineering the local reaction environment to yield highly active catalysts. Taking Ptδ- nanoparticles supported on oxygen vacancy enriched MgO nanosheets as a prototypical example, we have successfully created a local acid-like environment in the alkaline medium and achieve excellent hydrogen evolution reaction performances. The local acid-like environment is evidenced by operando Raman, synchrotron radiation infrared and X-ray absorption spectroscopy that observes a key H3O+ intermediate emergence on the surface of MgO and accumulation around Ptδ- sites during electrocatalysis. Further analysis confirms that the critical factors of the forming the local acid-like environment include: the oxygen vacancy enriched MgO facilitates H2O dissociation to generate H3O+ species; the F centers of MgO transfers its unpaired electrons to Pt, leading to the formation of electron-enriched Ptδ- species; positively charged H3O+ migrates to negatively charged Ptδ- and accumulates around Ptδ- nanoparticles due to the electrostatic attraction, thus creating a local acidic environment in the alkaline medium.

In Situ Spectroscopic Characterization and Theoretical Calculations Identify Partially Reduced ZnO1-x /Cu Interfaces for Methanol Synthesis from CO2.

The active site of the industrial Cu/ZnO/Al2 O3 catalyst used in CO2 hydrogenation to methanol has been debated for decades. Grand challenges remain in the characterization of structure, composition, and chemical state, both microscopically and spectroscopically, and complete theoretical calculations are limited when it comes to describing the intrinsic activity of the catalyst over the diverse range of structures that emerge under realistic conditions. Here a series of inverse model catalysts of ZnO on copper hydroxide were prepared where the size of ZnO was precisely tuned from atomically dispersed species to nanoparticles using atomic layer deposition. ZnO decoration boosted methanol formation to a rate of 877 gMeOH kgcat -1 h-1 with ≈80 % selectivity at 493 K. High pressure in situ X-ray absorption spectroscopy demonstrated that the atomically dispersed ZnO species are prone to aggregate at oxygen-deficient ZnO ensembles instead of forming CuZn metal alloys. By modeling various potential active structures, density functional theory calculations and microkinetic simulations revealed that ZnO/Cu interfaces with oxygen vacancies, rather than stoichiometric interfaces, Cu and CuZn alloys were essential to catalytic activation.

Insight into the structure and metabolic function of iron-rich nanoparticles in anammox bacteria.

Anaerobic ammonium-oxidizing (anammox) bacteria are iron abundant and depend heavily on iron-binding proteins. The iron demand of anammox bacteria is relatively large. However, it still remains some doubts where these large quantities of available iron come from and how they are regulated in anammox bacteria. Herein, iron-rich nanoparticles in anammoxosomes were detected by synchrotron soft X-ray tomography coupled with scanning transmission X-ray microscopy (STXM). The iron-rich nanoparticles were identified as ferric oxide (α-Fe2O3) mineral cores, and the local atomic structure of iron-rich nanoparticles was obtained by X-ray absorption fine-structure (XAFS) spectra. The bacterioferritin of Q1Q315 and Q1Q5F8 were detected by proteomics analysis. On this basis, the metabolic pathway centered on iron-rich nanoparticles was proposed.

Boosting Activity and Stability of Metal Single-Atom Catalysts via Regulation of Coordination Number and Local Composition.

Controlling the chemical environments of the active metal atom including both coordination number (CN) and local composition (LC) is vital to achieve active and stable single-atom catalysts (SACs), but remains challenging. Here we synthesized a series of supported Pt1 SACs by depositing Pt atoms onto the pretuned anchoring sites on nitrogen-doped carbon using atomic layer deposition. In hydrogenation of para-chloronitrobenzene, the Pt1 SAC with a higher CN about four but less pyridinic nitrogen (Npyri) content exhibits a remarkably high activity along with superior recyclability compared to those with lower CNs and more Npyri. Theoretical calculations reveal that the four-coordinated Pt1 atoms with about 1 eV lower formation energy are more resistant to agglomerations than the three-coordinated ones. Composition-wise decrease of the Pt-Npyri bond upshifts gradually the Pt-5d center, and minimal one Pt-Npyri bond features a high-lying Pt-5d state that largely facilitates H2 dissociation, boosting hydrogenation activity remarkably.

Identification of the Active-Layer Structures for Acidic Oxygen Evolution from 9R-BaIrO3 Electrocatalyst with Enhanced Iridium Mass Activity.

Iridium-based perovskites show promising catalytic activity for oxygen evolution reaction (OER) in acid media, but the iridium mass activity remains low and the active-layer structures have not been identified. Here, we report highly active 1 nm IrOx particles anchored on 9R-BaIrO3 (IrOx/9R-BaIrO3) that are directly synthesized by solution calcination followed by strong acid treatment for the first time. The developed IrOx/9R-BaIrO3 catalyst delivers a high iridium mass activity (168 A gIr-1), about 16 times higher than that of the benchmark acidic OER electrocatalyst IrO2 (10 A gIr-1), and only requires a low overpotential of 230 mV to reach a catalytic current density of 10 mA cm-2geo. Careful scanning transmission electron microscopy, synchrotron radiation-based X-ray absorption spectroscopy, and X-ray photoelectron spectroscopy analyses reveal that, during the electrocatalytic process, the initial 1 nm IrOx nanoparticles/9R-BaIrO3 evolve into amorphous Ir4+OxHy/IrO6 octahedrons and then to amorphous Ir5+Ox/IrO6 octahedrons on the surface. Such high relative content of amorphous Ir5+Ox species derived from trimers of face-sharing IrO6 octahedrons in 9R-BaIrO3 and the enhanced metallic conductivity of the Ir5+Ox/9R-BaIrO3 catalyst are responsible for the excellent acidic OER activity. Our results provide new insights into the surface active-layer structure evolution in perovskite electrocatalysts and demonstrate new approaches for engineering highly active acidic OER nanocatalysts.

Intrinsic Room-Temperature Ferromagnetism in V2C MXene Nanosheets.

Two-dimensional (2D) materials with intrinsic magnetic properties are intensively explored due to their potential applications in low-power-consumption electronics and spintronics. To date, only a handful of intrinsic magnetic 2D materials have been reported. Here, we report a realization of intrinsic ferromagnetic behavior in 2D V2C MXene nanosheets through layer mismatch engineering. The V2C MXene nanosheets with a small-angle twisting show a robust intrinsic ferromagnetic response with a saturation magnetic moment of 0.013 emu/g at room temperature. An in-depth study has been performed by X-ray absorption spectroscopy as well as electron paramagnetic resonance (EPR) and photoelectron spectroscopy analyses. It has been revealed that the symmetry-broken interlayer twisting reduced the degeneracy of V 3d states and the van Hove singularity. This led to a redistribution of the density of electronic states near the Fermi level and consequently activated the Stoner ferromagnetism with improved density of itinerant d electrons. This work highlights V2C MXene as a promising intrinsic room-temperature ferromagnetic material with potential applications in spintronics or spin-based electronics.

Synergizing metal-support interactions and spatial confinement boosts dynamics of atomic nickel for hydrogenations.

Atomically dispersed metal catalysts maximize atom efficiency and display unique catalytic properties compared with regular metal nanoparticles. However, achieving high reactivity while preserving high stability at appreciable loadings remains challenging. Here we solve the challenge by synergizing metal-support interactions and spatial confinement, which enables the fabrication of highly loaded atomic nickel (3.1 wt%) along with dense atomic copper grippers (8.1 wt%) on a graphitic carbon nitride support. For the semi-hydrogenation of acetylene in excess ethylene, the fabricated catalyst shows extraordinary catalytic performance in terms of activity, selectivity and stability-far superior to supported atomic nickel alone in the absence of a synergizing effect. Comprehensive characterization and theoretical calculations reveal that the active nickel site confined in two stable hydroxylated copper grippers dynamically changes by breaking the interfacial nickel-support bonds on reactant adsorption and making these bonds on product desorption. Such a dynamic effect confers high catalytic performance, providing an avenue to rationally design efficient, stable and highly loaded, yet atomically dispersed, catalysts.

Embedding atomic cobalt into graphene lattices to activate room-temperature ferromagnetism.

Graphene is extremely promising for next-generation spintronics applications; however, realizing graphene-based room-temperature magnets remains a great challenge. Here, we demonstrate that robust room-temperature ferromagnetism with TC up to ∼400 K and saturation magnetization of 0.11 emu g-1 (300 K) can be achieved in graphene by embedding isolated Co atoms with the aid of coordinated N atoms. Extensive structural characterizations show that square-planar Co-N4 moieties were formed in the graphene lattices, where atomically dispersed Co atoms provide local magnetic moments. Detailed electronic structure calculations reveal that the hybridization between the d electrons of Co atoms and delocalized pz electrons of N/C atoms enhances the conduction-electron mediated long-range magnetic coupling. This work provides an effective means to induce room-temperature ferromagnetism in graphene and may open possibilities for developing graphene-based spintronics devices.

Interfacial sites in platinum-hydroxide-cobalt hybrid nanostructures for promoting CO oxidation activity.

Metal-oxide/hydroxide hybrid nanostructures provide an excellent platform to study the interfacial effects on tailoring the catalysis of metal catalysts. Herein, a hybrid nanostructure of Pt@Co(OH)2 supported on SiO2 was synthesized by incipient wetness impregnation of Co(OH)2 with the aid of H2O2 and successive urea-assisted deposition-precipitation of platinum nanoparticles. The Fenton-like reaction between Co2+ and H2O2 during the impregnation process facilitates the formation of active interfacial sites. This hybrid nanostructure exhibits much higher catalytic activity towards CO oxidation than Pt/SiO2 nanoparticles with a similar Pt loading and particle size. In situ diffuse reflectance infrared Fourier transform spectroscopy was used to track the CO adsorption processes and to identify the reaction intermediates during CO oxidation. It shows that the OH species at the Pt-OH-Co interfacial sites could readily react with CO adsorbed on neighboring Pt to yield CO2 by forming *COOH intermediates and oxygen vacancies. Under the CO + O2 oxidation conditions, O2 molecules are activated by the oxygen vacancy and react with the CO molecules adsorbed on Pt to generate CO2, via forming the highly active *OOH intermediates as observed by DRIFTS.

Single-Atom-Layer Catalysis in a MoS2 Monolayer Activated by Long-Range Ferromagnetism for the Hydrogen Evolution Reaction: Beyond Single-Atom Catalysis.

Single-atom-layer catalysts with fully activated basal-atoms will provide a solution to the low loading-density bottleneck of single-atom catalysts. Herein, we activate the majority of the basal sites of monolayer MoS2 , by doping Co ions to induce long-range ferromagnetic order. This strategy, as revealed by in situ synchrotron radiation microscopic infrared spectroscopy and electrochemical measurements, could activate more than 50 % of the originally inert basal-plane S atoms in the ferromagnetic monolayer for the hydrogen evolution reaction (HER). Consequently, on a single monolayer of ferromagnetic MoS2 measured by on-chip micro-cell, a current density of 10 mA cm-2 could be achieved at the overpotential of 137 mV, corresponding to a mass activity of 28, 571 Ag-1 , which is two orders of magnitude higher than the multilayer counterpart. Its exchange current density of 75 µA cm-2 also surpasses most other MoS2 -based catalysts. Experimental results and theoretical calculations show the activation of basal plane S atoms arises from an increase of electronic density around the Fermi level, promoting the H adsorption ability of basal-plane S atoms.

Synthesis of Quasi-Bilayer Subnano Metal-Oxide Interfacial Cluster Catalysts for Advanced Catalysis.

Planar metal clusters possess high metal utilization, distinct electronic properties, and catalytic functions from their 3D counterparts. However, synthesis of these materials is challenging due to much elevated surface free energies. Here it is reported that silica supported planar bilayer Pt-CoOx subnano clusters, consisting of approximately one atomic layer of Pt and one CoOx layer on top, can be achieved by employing strong-electrostatic interactions during impregnation and precisely-controlled CoOx coating using atomic layer deposition. Such bilayer structure is unambiguously confirmed by electron microscopy and in situ X-ray absorption fine spectroscopy which is never reported before. This synthetic approach can be extended to another eight permutations of planar metal-oxide subnano clusters. The resulting bilayer catalysts, owing to unique electronic properties and the abundant metal-oxide interfaces created, exhibit excellent catalytic performances in the reactions of preferential oxidation of CO in H2 and selective hydrogenation of acetylene, by showing much higher selectivity and intrinsic activities at least 8 and 48 times greater than those conventional oxide coated 3D metal clusters/nanoparticles, highlighting the advances of bilayer interfacial structure. These findings open a new avenue to design abundant and highly active metal-oxide interfaces for advanced metal catalysis.

In situ observations of the structural dynamics of platinum-cobalt-hydroxide nanocatalysts under CO oxidation.

The structures, compositions and chemical states of metal catalysts are prone to dynamic changes in response to reaction conditions. In this work, a combination of in situ X-ray absorption fine structure spectroscopy and diffuse reflectance infrared Fourier transform spectroscopy has been used to monitor the temperature-dependent structural dynamics in bimetallic Pt-Co(OH)2 nanocatalysts during CO oxidation. Alloying with electron-donating Co promotes the catalytic activity of metallic Pt for CO oxidation at low temperature. At elevated temperatures under an oxidation atmosphere, O2 drives the segregation of the Pt-Co alloy into cobalt oxide and platinum metal, with the extent of alloying sharply decreasing from ∼30% at 300 K to 0 at 473 K. Reduction at high temperature could recover the formation of the Pt-Co alloy with the same alloying extent. The observed structural dynamics could be well correlated with the kinetic behavior of the catalysts. This work highlights the importance of tracking the dynamic structural changes of working catalysts for a correct understanding of their catalytic behavior.