Synthetic cannabinoid use in an adult male prison in the UK.

INTRODUCTION: Synthetic cannabinoids (i.e. Spice) are a major public health problem in UK prisons, however, research in this area is limited. Here we aimed to draw comparisons between people with and without experience of using synthetic cannabinoids in prison, to characterise the features of, and motivations for use within this setting and evaluate support for different treatment interventions. METHOD: Questionnaires were administered to 122 people in a category-B prison for adult males in England between July 2022 and March 2023. Participants were asked questions related to their sociodemographic and custodial characteristics, use of synthetic cannabinoids (and other drugs) inside and outside of prison and psychological distress was measured via the Brief Symptom Inventory (BSI-18). Those that had ever used synthetic cannabinoids in prison completed additional questions related to features of use, motivations for use and support for various interventions. RESULTS: In total 46.7 % (n = 57) of participants reported use of synthetic cannabinoids in prison and this group experienced significantly greater levels of psychological distress compared to those reporting no use (mean (± standard deviation) BSI-18 scores = 23.7 (±16.7) vs 12.8 (±13.6), p < 0.001). Participants mostly reported using paper-based preparations (77.4 %) and use via e-cigarettes (75.9 %). The most strongly endorsed motivations for use included to alleviate boredom (91.1 % strongly agree/agree), to make the sentence pass faster (89.3 % strongly agree/agree) and to cope with stress (80.4 % strongly agree/agree). The interventions that received most support were strategies to better manage time and medication to manage withdrawal. CONCLUSIONS: The use of synthetic cannabinoids in UK prisons typically involves the use of paper-based preparations via e-cigarettes, and use is associated with greater levels of psychological distress. Motivations for use were mostly pragmatic (e.g. to alleviate boredom or cope with stress) and interventions should prioritise increasing the time individuals spend out of cells and in meaningful activity.

Exploration of the nicotinamide-binding site of the tankyrases, identifying 3-arylisoquinolin-1-ones as potent and selective inhibitors in vitro.

Tankyrases-1 and -2 (TNKS-1 and TNKS-2) have three cellular roles which make them important targets in cancer. Using NAD(+) as a substrate, they poly(ADP-ribosyl)ate TRF1 (regulating lengths of telomeres), NuMA (facilitating mitosis) and axin (in wnt/ß-catenin signalling). Using molecular modelling and the structure of the weak inhibitor 5-aminoiso quinolin-1-one, 3-aryl-5-substituted-isoquinolin-1-ones were designed as inhibitors to explore the structure-activity relationships (SARs) for binding and to define the shape of a hydrophobic cavity in the active site. 5-Amino-3-arylisoquinolinones were synthesised by Suzuki-Miyaura coupling of arylboronic acids to 3-bromo-1-methoxy-5-nitro-isoquinoline, reduction and O-demethylation. 3-Aryl-5-methylisoquinolin-1-ones, 3-aryl-5-fluoroisoquinolin-1-ones and 3-aryl-5-methoxyisoquinolin-1-ones were accessed by deprotonation of 3-substituted-N,N,2-trimethylbenzamides and quench with an appropriate benzonitrile. SAR around the isoquinolinone core showed that aryl was required at the 3-position, optimally with a para-substituent. Small meta-substituents were tolerated but groups in the ortho-positions reduced or abolished activity. This was not due to lack of coplanarity of the rings, as shown by the potency of 4,5-dimethyl-3-phenylisoquinolin-1-one. Methyl and methoxy were optimal at the 5-position. SAR was rationalised by modelling and by crystal structures of examples with TNKS-2. The 3-aryl unit was located in a large hydrophobic cavity and the para-substituents projected into a tunnel leading to the exterior. Potency against TNKS-1 paralleled potency against TNKS-2. Most inhibitors were highly selective for TNKSs over PARP-1 and PARP-2. A range of highly potent and selective inhibitors is now available for cellular studies.

One-pot tandem Hurtley-retro-Claisen-cyclisation reactions in the synthesis of 3-substituted analogues of 5-aminoisoquinolin-1-one (5-AIQ), a water-soluble inhibitor of PARPs.

Poly(ADP-ribose)polymerase-1 (PARP-1) is an important target for drug design for several therapeutic applications. 5-Aminoisoquinolin-1-one (5-AIQ) is a highly water-soluble lead compound; synthetic routes to 3-substituted analogues were explored. Tandem Hurtley coupling of ß-diketones with 2-bromo-3-nitrobenzoic acid, retro-Claisen acyl cleavage and cyclisation gave the corresponding 3-substituted 5-nitroisocoumarins. Treatment with ammonia at high temperature and reduction with tin(II) chloride gave eleven target 3-substituted 5-AIQs, which were all soluble in water (>1% w/v) as their HCl salts. Most were more potent than 5-AIQ as inhibitors of PARP-1 and of PARP-2 in vitro, the most active being 5-amino-3-methylisoquinolin-1-one (PARP-1: IC50=0.23µM vs IC50=1.6µM for 5-AIQ). Some rationalisation of the SAR was achieved through molecular modelling.

Digital camera measurements of soot temperature and soot volume fraction in axisymmetric flames.

New diagnostics are presented that use a digital camera to measure full-field soot temperatures and soot volume fractions in axisymmetric flames. The camera is a Nikon D700 with 12 megapixels and 14 bit depth in each color plane, which was modified by removing the infrared and anti-aliasing filters. The diagnostics were calibrated with a blackbody furnace. The flame considered here was an 88 mm long ethylene/air co-flowing laminar jet diffusion flame on a round 11.1 mm burner. The resolution in the flame plane is estimated at between 0.1 and 0.7 mm. Soot temperatures were measured from soot radiative emissions, using ratio pyrometry at 450, 650, and 900 nm following deconvolution. These had a range of 1600-1850 K, a temporal resolution of 125 ms, and an estimated uncertainty of ±50 K. Soot volume fractions were measured two ways: from soot radiative emissions and from soot laser extinction at 632.8 nm, both following deconvolution. Soot volume fractions determined from emissions had a range of 0.1-10 ppm, temporal resolutions of 125 ms, and an estimated uncertainty of ±30%. Soot volume fractions determined from laser extinction had a range of 0.2-10 ppm, similar temporal resolutions, and an estimated uncertainty of ±10%. The present measurements agree with past measurements in this flame using traversing optics and probes; however, they avoid the long test times and other complications of such traditional methods.

5-Benzamidoisoquinolin-1-ones and 5-(ω-carboxyalkyl)isoquinolin-1-ones as isoform-selective inhibitors of poly(ADP-ribose) polymerase 2 (PARP-2).

PARP-2 is a member of the poly(ADP-ribose) polymerase family, with some activities similar to those of PARP-1 but with other distinct roles. Two series of isoquinolin-1-ones were designed, synthesized, and evaluated as selective inhibitors of PARP-2, using the structures of the catalytic sites of the isoforms. A new efficient synthesis of 5-aminoisoquinolin-1-one was developed, and acylation with acyl chlorides gave 5-acylaminoisoquinolin-1-ones. By examination of isoquinolin-1-ones with carboxylates tethered to the 5-position, Heck coupling of 5-iodoisoquinolin-1-one furnished the 5-CH═CHCO(2)H compound for reduction to the 5-propanoic acid. Alkylation of 5-aminoisoquinolin-1-one under mildly basic conditions, followed by hydrolysis, gave 5-(carboxymethylamino)isoquinolin-1-one, whereas it was alkylated at 2-N with methyl propenoate and strong base. Compounds were assayed in vitro for inhibition of PARP-1 and PARP-2, using FlashPlate and solution-phase assays, respectively. The 5-benzamidoisoquinolin-1-ones were more selective for inhibition of PARP-2, whereas the 5-(ω-carboxyalkyl)isoquinolin-1-ones were less so. 5-Benzamidoisoquinolin-1-one is the most PARP-2-selective compound (IC(50(PARP-1))/IC(50(PARP-2)) = 9.3) to date, in a comparative study.

Synthesis of 4-alkyl-, 4-aryl- and 4-arylamino-5-aminoisoquinolin-1-ones and identification of a new PARP-2 selective inhibitor.

The considerable interest in substituted isoquinolin-1-ones related to 5-aminoisoquinolin-1-one (5-AIQ) as drugs points to a need for an efficient and straightforward synthesis of the 4,5-disubstituted bicycles. Bromination of 5-nitroisoquinolin-1-one gave 4-bromo-5-nitroisoquinolin-1-one but neither this nor 5-amino-4-bromoisoquinolin-1-one would participate in Pd-catalysed couplings. Protection of the lactam as 1-methoxy- and 1-benzyloxy-4-bromo-5-nitroisoquinolines, however, permitted Stille, Suzuki and Buchwald-Hartwig couplings to take place in high yields, insensitive to electronic demands and severe steric bulk in the arylboronic acids. Lithiation of 4-bromo-1-methoxy-5-nitroisoquinoline and quench with iodomethane gave 1-methoxy-4-methyl-5-nitroisoquinoline in low yield. Demethylation of the 1-methoxy-4-substituted-5-nitroisoquinolines with hydrogen bromide gave 4-substituted-5-nitroisoquinolin-1-ones, whereas hydrogenolytic debenzylation was achieved with simultaneous reduction of the 5-nitro group. 5-Amino-4-(4-trifluoromethylphenyl)isoquinolin-1-one was identified as a new potent and selective inhibitor of poly(ADP-ribose)polymerase-2 (PARP-2).

Formation of 3-aryl-5-nitroisocoumarins from 5-nitroisocoumarins and aromatic acyl chlorides under Friedel-Crafts conditions.

Treatment of 5-nitroisocoumarin with aromatic acyl chlorides under Friedel-Crafts conditions gives 3-aryl-5-nitroisocoumarins, rather than the expected 4-acyl-5-nitroisocoumarins. This procedure was optimized for reaction temperature (150 degrees C), solvent (nitrobenzene), and Lewis acid (SnCl4). Reaction of 5-nitroisocoumarin with [13C]-carbonyl benzoyl chloride under the optimum conditions gave 5-nitro-3-phenylisocoumarin in which the 13C is located at the 3-C of the heterocycle, indicating that the benzoyl carbon framework is incorporated intact.

Thin-filament pyrometry with a digital still camera.

A novel thin-filament pyrometer is presented. It involves a consumer-grade color digital still camera with 6 megapixels and 12 bits per color plane. SiC fibers were used and scanning-electron microscopy found them to be uniform with diameters of 13.9 micro m. Measurements were performed in a methane-air coflowing laminar jet diffusion flame with a luminosity length of 72 mm. Calibration of the pyrometer was accomplished with B-type thermocouples. The pyrometry measurements yielded gas temperatures in the range of 1400-2200 K with an estimated uncertainty of +/-60 K, a relative temperature resolution of +/-0.215 K, a spatial resolution of 42 mum, and a temporal resolution of 0.66 ms. Fiber aging for 10 min had no effect on the results. Soot deposition was less problematic for the pyrometer than for the thermocouple.