Neutralization of ricin toxin on building interior surfaces using liquid decontaminants.

Ricin is a highly toxic protein, capable of inhibiting protein synthesis within cells, and is produced from the beans of the Ricinus communis (castor bean) plant. Numerous recent incidents involving ricin have occurred, many in the form of mailed letters resulting in both building and mail sorting facility contamination. The goal of this study was to assess the decontamination efficacy of several commercial off-the-shelf (COTS) cleaners and decontaminants (solutions of sodium hypochlorite [bleach], quaternary ammonium, sodium percarbonate, peracetic acid, and hydrogen peroxide) against a crude preparation of ricin toxin. The ricin was inoculated onto four common building materials (pine wood, drywall joint tape, countertop laminate, and industrial carpet), and the decontaminants were applied to the test coupons using a handheld sprayer. Decontamination efficacy was quantified using an in-vitro cytotoxicity assay to measure the quantity of bioactive ricin toxin extracted from test coupons as compared to the corresponding positive controls (not sprayed with decontaminant). Results showed that decontamination efficacy varied by decontaminant and substrate material, and that efficacy generally improved as the number of spray applications or contact time increased. The solutions of 0.45% peracetic acid and the 20,000-parts per million (ppm) sodium hypochlorite provided the overall best decontamination efficacy. The 0.45% peracetic acid solution achieved 97.8 to 99.8% reduction with a 30-min contact time.

Evaluation of steam heat as a decontamination approach for SARS-CoV-2 when applied to common transit-related materials.

AIMS: The purpose of this study was to evaluate the efficacy of steam heat for inactivation of SARS-CoV-2 when applied to materials common in mass transit installations. METHODS AND RESULTS: SARS CoV-2 (USA-WA1/2020) was resuspended in either cell culture media or synthetic saliva, inoculated (∼1 × 106 TCID50) onto porous and nonporous materials and subjected to steam inactivation efficacy tests as either wet or dried droplets. The inoculated test materials were exposed to steam heat ranging from 70°C to 90°C. The amount of infectious SARS-CoV-2 remaining after various exposure durations ranging from 1 to 60 s was assessed. Higher steam heat application resulted in higher inactivation rates at short contact times. Steam applied at 1-inch distance (∼90°C at the surface) resulted in complete inactivation for dry inoculum within 2 s of exposure (excluding two outliers of 19 test samples at the 5-s duration) and within 2-30 s of exposure for wet droplets. Increasing the distance to 2 inches (∼70°C) also increased the exposure time required to achieve complete inactivation to 15 or 30 s for materials inoculated with saliva or cell culture media, respectively. CONCLUSIONS: Steam heat can provide high levels of decontamination (>3 log reduction) for transit-related materials contaminated with SARS-CoV-2 using a commercially available steam generator with a manageable exposure time of 2-5 s.

Decontamination efficacy of common liquid disinfectants against non-spore-forming biological agents in soil matrices.

AIMS: The purpose of this study was to evaluate decontamination efficacy, within three soil types, against Yersinia pestis, Burkholderia pseudomallei, and the Venezuelan Equine Encephalitis virus (VEEV). METHODS AND RESULTS: One of three liquid disinfectants (dilute bleach, Virkon-S or Klozur One) was added to three soil types (sand, loam, or clay) and allowed contact for four pre-spike durations: 0, 15, 30 and 60 min. Y. pestis, B. pseudomallei, or VEEV was then spiked into the soil (10 microliters or approx. 1 × 107  CFU or PFU into 1 g soil) and decontamination efficacy assessed at post-spike contact times of 10 or 60 min at ambient environmental conditions. Across all soil types, sandy soil resulted in the least quenching to all three disinfectants tested as shown by sustained decontamination efficacy across all pre-spike and post-spike timepoints. Clay and loam soil types exhibited quenching effects on the hypochlorite and peroxygen based disinfectants (dilute bleach and Virkon S) and in general resulted in decreased efficacy with increased pre-spike contact time. The sodium persulfate (Klozur One) performance was the most consistent across all soil types and pre-spike contact times, resulting in greater efficacy with increased post-spike time. CONCLUSIONS: Liquid disinfectants can provide high levels of decontamination in soil for both viral and non-spore-forming bacterial select agents. Hypochlorite and peroxygen based disinfectants used in soils containing higher organic content (loam or clay) may require extended contact times or re-application of liquid disinfectant, in as little as 15 min of application, to achieve a 6-log reduction. SIGNIFICANCE AND IMPACT OF THE STUDY: These results provide information for the performance of three disinfectants in soil against non-spore-forming select agents. These data may aid response decision makers following a biological contamination incident by informing the selection of disinfectant as well as the re-application time to achieve effective site remediation.

Evaluation of environmental conditions as a decontamination approach for SARS-CoV-2 when applied to common library, archive and museum-related materials.

AIMS: The purpose of this study was to evaluate the effects of ambient or altered environmental conditions on the inactivation of SARS-CoV-2 applied to materials common in libraries, archives and museums. METHODS AND RESULTS: Porous and non-porous materials (e.g. paper, plastic protective book cover) were inoculated with approximately 1 × 105 TCID50 SARS CoV-2 (USA-WA1/2020), dried, placed within test chamber in either a stacked or unstacked configuration, and exposed to environmental conditions ranging from 4 to 29°C at 40 ± 10% relative humidity. The amount of infectious SARS-CoV-2 was then assessed at various timepoints from 0 to 10 days. Ambient conditions resulted in varying inactivation rates per material type. Virus inactivation rate decreased when materials were stacked or at colder temperatures. Virus inactivation rate increased when materials were unstacked or at warmer temperatures. CONCLUSIONS: SARS-CoV-2 at ambient conditions resulted in the inactivation of virus below limit of quantitation (LOQ) for all materials by Day 8. Warmer temperatures, for a subset of materials, increased SARS-CoV-2 inactivation, and all were

Formaldehyde Vapor Characteristics in Varied Decontamination Environments.

INTRODUCTION: This effort investigated formaldehyde vapor characteristics under various environmental conditions by the analyses of air samples collected over a time-course. This knowledge will help responders achieve desired formaldehyde exposure parameters for decontamination of affected spaces after a biological contamination incident. METHODS: Prescribed masses of paraformaldehyde and formalin were sublimated or evaporated, respectively, to generate formaldehyde vapor. Adsorbent cartridges were used to collect air samples from the test chamber at predetermined times. A validated method was used to extract the cartridges and analyze for formaldehyde via liquid chromatography. In addition, material demand for the formaldehyde was evaluated by inclusion of arrays of Plexiglas panels in the test chamber to determine the impact of varied surface areas within the test chamber. Temperature was controlled with a circulating water bath connected to a radiator and fan inside the chamber. Relative humidity was controlled with humidity fixed-point salt solutions and water vapor generated from evaporated water. RESULTS: Low temperature trials (approximately 10°C) resulted in decreased formaldehyde air concentrations throughout the 48-hour time-course when compared with formaldehyde concentrations in the ambient temperature trials (approximately 22°C). The addition of clear Plexiglas panels to increase the surface area of the test chamber interior resulted in appreciable decreases of formaldehyde air concentration when compared to an empty test chamber. CONCLUSION: This work has shown that environmental variables and surface-to-volume ratios in the decontaminated space may affect the availability of formaldehyde in the air and, therefore, may affect decontamination effectiveness.

Decontamination of Bacillus Spores with Formaldehyde Vapor under Varied Environmental Conditions.

Introduction: This study investigated formaldehyde decontamination efficacy against dried Bacillus spores on porous and non-porous test surfaces, under various environmental conditions. This knowledge will help responders determine effective formaldehyde exposure parameters to decontaminate affected spaces following a biological agent release. Methods: Prescribed masses of paraformaldehyde or formalin were sublimated or evaporated, respectively, to generate formaldehyde vapor within a bench-scale test chamber. Adsorbent cartridges were used to measure formaldehyde vapor concentrations in the chamber at pre-determined times. A validated method was used to extract the cartridges and analyze for formaldehyde via liquid chromatography. Spores of Bacillus globigii, Bacillus thuringiensis, and Bacillus anthracis were inoculated and dried onto porous bare pine wood and non-porous painted concrete material coupons. A series of tests was conducted where temperature, relative humidity, and formaldehyde concentration were varied, to determine treatment efficacy outside of conditions where this decontaminant is well-characterized (laboratory temperature and humidity and 12 mg/L theoretical formaldehyde vapor concentration) to predict decontamination efficacy in applications that may arise following a biological incident. Results: Low temperature trials (approximately 10°C) resulted in decreased formaldehyde air concentrations throughout the 48-hour time-course when compared with formaldehyde concentrations collected in the ambient temperature trials (approximately 22°C). Generally, decontamination efficacy on wood was lower for all three spore types compared with painted concrete. Also, higher recoveries resulted from painted concrete compared to wood, consistent with historical data on these materials. The highest decontamination efficacies were observed on the spores subjected to the longest exposures (48 hours) on both materials, with efficacies that gradually decreased with shorter exposures. Adsorption or absorption of the formaldehyde vapor may have been a factor, especially during the low temperature trials, resulting in less available formaldehyde in the air when measured. Conclusion: Environmental conditions affect formaldehyde concentrations in the air and thereby affect decontamination efficacy. Efficacy is also impacted by the material with which the contaminants are in contact.