ABSTRACT
Fiber Bragg grating (FBG) sensors applying time-delay interrogators with wavelength swept lasers (WSLs) are popular for their great potentials in high sensing resolution and power budget. In these systems, well-calibrated WSLs with reduced wavelength nonlinearity and jitter are critical for the sensing performance. However, high-performance WSLs are expensive and could significantly increase the cost of the systems. The overall cost may be reduced by maximally sharing each WSL with multiple sensing FBGs through mechanisms like power splitting, which distribute the WSL signal into multiple independently operated serial FBG chains. Under such scenarios, the sensing processing unit (SPU) of each serial FBG chain must be synchronized with the WSL for correctly estimating the FBGs' respective spectra from the signal return time delays. We previously propose a self-synchronized scheme relying on the dual-polarity spectrum signal, which reduces the synchronization labor. The dual-polarity signal has a wider dynamic range, which may limit the system response speed or accuracy, considering the amplifiers' responses or the analog-to-digital converters' (ADCs') quantization noise. In this Letter, we apply peak-saturated FBG spectra for the sensors to increase the receivers' equivalent dynamic range. The flattop waveforms of the saturated peaks result in uncertainty for the peak positions. An artificial neutral network (ANN)-based method is further studied to enhance the peak detection accuracy. We show an â¼88% receiver dynamic range improvement with an inaccuracy reduction of about a half compared to the filter-and-maximum-readout (FMR) method.
ABSTRACT
Fiber Bragg gratings (FBGs) are widely applied in optical sensing systems due to their advantages including being simple to use, high sensitivity, and having great potential for integration into optical communication systems. A common method used for FBG sensing systems is wavelength interrogation. The performance of interrogation based sensing systems is significantly determined by the accuracy of the wavelength peak detection processing. Direct maximum value readout (DMVR) is the simplest peak detection method. However, the detection accuracy of DMVR is sensitive to noise and the sampling resolution. Many modified peak detection methods, such as filtering and curve fitting schemes, have been studied in recent decades. Though these methods are less sensitive to noise and have better sensing accuracy at lower sampling resolutions, they also confer increased processing complexity. As massive sensors may be deployed for applications such as the Internet of things (IoT) and artificial intelligence (AI), lower levels of processing complexity are required. In this paper, an efficient scheme applying a three-point peak detection estimator is proposed and studied, which shows a performance that is close to the curve fitting methods along with reduced complexity. A proof-of-concept experiment for temperature sensing is performed. 34% accuracy improvement compared to the DMVR is demonstrated.
ABSTRACT
Fiber Bragg gratings (FBGs) with various interrogation schemes to estimate the FBG's spectrum shift have been widely used in fiber sensing systems. Wavelength swept laser (WSL) based interrogation architectures have been proposed to offer rapid and high-quality sensing performance. However, for getting higher sensing accuracy, the demands for high-performance WSL may push the system cost. Under these considerations, a WSL distribution architecture allowing multiple sensing processing units (SPUs) to share the WSL is studied in this Letter. A self-synchronization scheme is proposed to enable flexible SPU deployment with no concerns for the clock calibration. The proposed system is experimentally studied. Temperature estimation error of â¼2.5∘C and â¼0.5∘C with sensitivities of 0.13°C/ms and 0.14°C/ms, respectively, for the high and small temperature ranges are demonstrated.
ABSTRACT
A system using optical two-level orthogonal-frequency-division-multiplexing (OFDM) - amplitude-shift-keying (ASK) modulation is proposed and demonstrated to reduce the processing latency for the optical mobile fronthaul networks. At the proposed remote-radio-head (RRH), the high data rate OFDM signal does not need to be processed, but is directly launched into a high speed photodiode (HSPD) and subsequently emitted by an antenna. Only a low bandwidth PD is needed to recover the low data rate ASK control signal. Hence, it is simple and provides low-latency. Furthermore, transporting the proposed system over the already deployed optical-distribution-networks (ODNs) of passive-optical-networks (PONs) is also demonstrated with 256 ODN split-ratios.
ABSTRACT
Optical blue filter is usually regarded as a critical optical component for high speed phosphor-based white light emitting diode (LED) visible-light-communication (VLC). However, the optical blue filter plays different roles in VLC when using modulations of on-off keying (OOK) or discrete multi-tone (DMT). We show that in the DMT VLC system, the blue optical filter may be unnecessary, and even degrade the transmission performance (by reducing the optical signal-to-noise ratio (SNR)). Analyses and verifications by experiments are performed. To the best of our knowledge, this is the first time the function of blue filters in VLC is explicitly analyzed.
ABSTRACT
Visible light communication (VLC) using LEDs has attracted significant attention recently for the future secure, license-free and electromagnetic-interference (EMI)-free optical wireless communication. Dimming technique in LED lamp is advantageous for energy efficiency. Color control can be performed in the red-green-blue (RGB) LEDs by using dimming technique. It is highly desirable to employ dimming technique to provide simultaneous color and dimming control and high speed VLC. Here, we proposed and demonstrated a LED dimming control using dimming-discrete-multi-tone (DMT) modulation. High speed DMT-based VLC with simultaneous color and dimming control is demonstrated for the first time to the best of our knowledge. Demonstration and analyses for several modulation conditions and transmission distances are performed, for instance, demonstrating the data rate of 103.5 Mb/s (using RGB LED) with fast Fourier transform (FFT) size of 512.
ABSTRACT
A highly spectral-efficient M-ary amplitude shift keying M-ary quadrature amplitude modulation orthogonal frequency division multiplexing (MASK-MQAM-OFDM) was proposed for the access network. With the highly spectral-efficient characteristic of MASK-MQAM-OFDM, seamless integration among passive-optical network (PON), wireless fiber-to-the-antenna (FTTA), and optical wireless visible light communication (VLC) can be achieved without using extra bandwidth for different services. A proof-of-concept experiment was demonstrated. The relation between the spectral efficiency of the MASK-MQAM-OFDM and the upstream signal performance was also discussed.
ABSTRACT
In this investigation, we propose and experimentally demonstrate a method for measuring the refractive index (RI) of liquid organic chemicals. The scheme is based on a single-mode fiber (SMF) sensor and an optical time-domain reflectometer (OTDR). Here, due to the different reflectance (R) between the SMF and organic liquid chemicals, the reflected power level of the backscattering light (BSL) measured by the OTDR would be different. Therefore, we can measure the RI of chemical under test via the measured BSL level. The proposed RI sensor is simple and easy to manipulate, with stable detected signals, and has the potential to be a valuable tool for use in biological and chemical applications.
