CFD modelling of an immobilised photocatalytic reactor for phenol degradation.

Photocatalysis is an advanced oxidation process, which has been gaining attention as a sustainable technology for tackling pollution. Optimum design, fabrication and scaling up of novel photocatalytic reactors are faced with problems such as fabrication cost and numerous experimental trials for optimisation. Computational fluid dynamics (CFD), a computer simulation technique can ease the process of scaling up photocatalytic reactors. The current study focuses on CFD modelling of a serpentine flow path photocatalytic reactor with curved baffles for phenol degradation. The investigation compared different reactor configurations to finalise the optimum design with maximum removal efficiency. Initially, a simple cuboidal reactor was chosen with an efficiency of 27%. However, with a serpentine flow path being introduced, the reactor displayed an improved efficiency of 42%. The addition of baffles improved flow homogeneity and degradation efficiency. The investigation showed that serpentine flow increased the residence time and fluid mixing, while the curved baffles prevented flow channelisation, which enhanced the degradation efficiency. Efficiencies corresponding to different baffle types and geometry were also compared and the final reactor design chosen was a horizontal curved baffled serpentine flow reactor with a flow rate of 0.3 L/s and improved efficiency of 43.1% for a residence time of 18.44 s.

An efficient system for electro-Fenton oxidation of pesticide by a reduced graphene oxide-aminopyrazine@3DNi foam gas diffusion electrode.

A stable rGO-AmPyraz@3DNiF gas diffusion electrode was prepared via modification of 3D nickel foam (3D-NiF) with aminopyrazine functionalized reduced graphene oxide (rGO-AmPyraz) for the electro Fenton (EF) process. The generation capacity of H2O2 and OH radicals by this electrode was assessed relative to 3DNiF and rGO-AmPyraz@indium tin oxide (ITO) electrodes and with/without a coated Fe3O4 plate. The rGO-AmPyraz@3DNiF electrode showed the maximum production of these radicals at 2.2 mmol h-1 and 410 µmol h-1, respectively (pH 3) with the least leaching of Ni2+ such as < 0.5 mg L-1 even after 5 cycles (e.g., relative to 3DNiF (24 mg L-1). Such control on Ni ion leaching was effective all across the tested pH from 3 to 8.5. Its H2O2 generation capacity was far higher than that of the nanocarbon supported on commercially available ITO conductive glass. The mineralization of dichlorvos (at initial concentration: 50 mg L-1) was confirmed with its complete degradation as the concentrations of the end products (e.g., free Cl-1 (5.36 mg L-1) and phosphate (12.89 mg L-1)) were in good agreement with their stoichiometric concentration in dichlorvos. As such, the proposed system can be recommended as an effective electrode to replace nanocarbon-based product commonly employed for EF processes.

Application and performance evaluation of a cost-effective vis- LED based fluidized bed reactor for the treatment of emerging contaminants.

Visible light induced photocatalysis is considered as one of the most potential technologies which can achieve new levels of sustainability in water treatment. The current study explores the performance of immobilized visible light active catalyst on inert media for light driven catalysis of pharmaceuticals. These coated media is used in a continuous flow fluidized column reactor equipped with spirally arranged visible Light Emitting Diodes (LEDs) as irradiation source. The treatment efficiency of the system is evaluated for the removal of pharmaceutical drugs such as carbamazepine, diclofenac and ibuprofen. For the present study, system parameters such as light intensity and flow rate are optimized for maximum removal rate. The system shows complete elimination of the pharmaceuticals under the given experimental conditions. Complete mineralization of the target compounds are confirmed by TOC analysis. Recyclability is an important attribute for full scale commercialization of a treatment technology. An investigation on the reusability study of the photocatalyst displayed no significant reduction in the removal efficiency for a run of six cycles, hence rendering the photocatalyst reusable. The results acquired indicate an immense potential for scaling up the photoreactor as a sustainable tertiary treatment technology in water treatment plants.