ABSTRACT
A current challenge for development of amperometric sensors for the greenhouse gas nitrous oxide (N2O) is their sensitivity toward dioxygen and trace water. The need for aqueous dioxygen scavengers in front of the sensor implies a background signal from penetrating water vapor. In this paper, we introduce substituted phosphines as dioxygen scavengers and demonstrate the application in a dioxygen-insensitive N2O sensor. Suitably substituted phosphines have been synthesized to achieve good solubility properties in the electrochemically inert solvent propylene carbonate. Several sensors with and without physical separation of the sensing and dioxygen scavenging compartments were made and compared to current commercial sensors. The use of phosphines soluble in organic solvents as dioxygen scavengers yielded a higher sensitivity, albeit with longer response time. Proof-of-concept N2O sensors without the physically separated dioxygen scavenger chamber showed a greatly enhanced sensitivity with a comparable response time, thus demonstrating the possibility for greatly simplified sensor construction.
ABSTRACT
A drainage/filtration apparatus was developed for automatically determining sedimentation velocity and dewatering rate. Pressure-step testing was used to study filter cake compressibility, resistance, and swelling. Activated sludge was analysed, and the data indicate that the sludge is highly compressible even at low pressures (10 kPa). Furthermore, compressed sludge cakes swell if the pressure is released. Hence, the average specific cake resistance decreases if the pressure is released, though the resistance is higher after the compression cycle than before. Sludge must be dewatered under low pressure, because higher pressure only compresses the cake and does not improve the dewatering rate.
