Occurrence and Fate of Trace Contaminants during Aerobic and Anaerobic Sludge Digestion and Dewatering.

Digestion of municipal wastewater biosolids is a necessary prerequisite to their beneficial use in land application, in order to protect public health and the receiving environment. In this study, 13 pharmaceuticals and personal care products (PPCPs), 11 musks, and 17 polybrominated diphenyl ethers were analyzed in 84 samples including primary sludge, waste activated sludge, digested biosolids, dewatered biosolids, and dewatering centrate or filtrate collected from five wastewater treatment plants with aerobic or anaerobic digestion. Aerobic digestion processes were sampled during both warm and cold temperatures to analyze seasonal differences. Among the studied compounds, triclosan, triclocarban, galaxolide, and BDE-209 were the substances most frequently detected under different treatment processes at levels up to 30,000 ng/g dry weight. Comparing aerobic and anaerobic digestion, it was observed that the levels of certain PPCPs and musks were significantly higher in anaerobically digested biosolids, relative to the residues from aerobic digestion. Therefore, aerobic digestion has the potential advantage of reducing levels of PPCPs and musks. On the other hand, anaerobic digestion has the advantage of recovering energy from the biosolids in the form of combustible gases while retaining the nutrient and soil conditioning value of this resource.

Occurrence and fate of rosuvastatin, rosuvastatin lactone, and atorvastatin in Canadian sewage and surface water samples.

Rosuvastatin (RST) and atorvastatin (ATO) are prescription drugs and members in the statin family used for the treatment of elevated cholesterol levels. A method using solid-phase extraction and liquid chromatography-tandem mass spectrometry (LC-MS/MS) for the determination of ATO, RST and its metabolite rosuvastatin lactone (RSTL) in sewage and surface water samples has been developed. In the influent and effluent samples collected from 11 sewage treatment plants located in Ontario, Canada, ATO, RST, and RSTL were detected in all samples with median concentrations of 166 ng L(-1) (influent) and 77 ng L(-1) (effluent) for ATO, 448 ng L(-1) (influent) and 324 ng L(-1) (effluent) for RST, as well as 158 ng L(-1) (influent) and 41 ng L(-1) (effluent) for RSTL. Due to the inter-conversion between RST and RSTL, the total concentration of RST and RSTL in a sewage sample should be reported. The median removal rate by wastewater treatment was 66% for ATO and 22% for RST and RSTL combined. These statins were quite persistent in sewage. After a storage period of 21 and 62 days, there was only a slight decrease in ATO concentration and no change in the total RST concentrations. These three compounds were also detected in a number of surface water samples at low ng L(-1) concentrations. This is the first reported occurrence and fate of RST and RSTL in the Canadian aquatic environment.

Microwave-assisted extraction (MAE) for the determination of polybrominated diphenylethers (PBDEs) in sewage sludge.

An efficient microwave-assisted extraction (MAE) method has been developed and evaluated for the quantification of eight major polybrominated diphenylethers (PBDEs) in sewage sludge. The PBDEs were extracted from wet and dry sludge in a microwave extraction unit using a hexane/acetone mixture for 35 min at a controlled temperature of 130 degrees C. The extract was concentrated, cleaned up on a silica gel column, and analyzed by gas chromatography/mass spectrometry (GC/MS) in the negative chemical ionization (NCI) mode. The MAE procedure exhibited higher extraction efficiency, specifically for BDE (brominated diphenylether) 209, than the conventional Soxhlet extraction. The test congeners were clearly separated under specific instrumental operating conditions, at a source temperature of 230 degrees C and a column length of 20 m. The present analytical method showed recovery efficiencies ranging from 80 to 110% when applied to the PBDE-free sludge spiked with eight PBDE congeners. The efficiency of the MAE method was confirmed using sludge obtained from four sewage treatment plants (STPs). The results indicate that BDE 47, 99, and 209 are the most abundant congeners present in these sewage sludges, which is consistent with previous reports.

Determination of ofloxacin, norfloxacin, and ciprofloxacin in sewage by selective solid-phase extraction, liquid chromatography with fluorescence detection, and liquid chromatography--tandem mass spectrometry.

A solid-phase extraction (SPE) and liquid chromatographic (LC) method was developed for the determination of selected fluoroquinolone (FQ) drugs including ofloxacin, norfloxacin, and ciprofloxacin in municipal wastewater samples. Extraction of the FQs was carried out with a weak cation exchanger SPE cartridge, the Oasis WCX. The cartridge was washed with water and methanol as a cleanup before the FQs were eluted by a mixture of methanol, acetonitrile, and formic acid. Separation of the FQs was achieved by using a Zorbax SB-C8 column under isocratic condition at a flow rate of 0.2mL/min. Recoveries of the FQs in spiked final effluent samples were between 87 and 94% with a relative standard deviation of less than 6%. Several techniques have been evaluated for the detection of FQs in sewage extracts; they included fluorescence detection and electrospray ionization (ESI) mass spectrometry using either mass-selective detection or tandem mass spectrometry (MS/MS). When they were applied to sewage influent and effluent samples, the LC-MS/MS technique operating in the multiple reaction monitoring (MRM) mode proved to be best suited for the determination of FQs in sewage samples as it provided the highest sensitivity (limit of quantification 5ng/L) and selectivity. The observation of signal suppression (matrix effect) for some FQs in ESI LC-MS and LC-MS/MS is discussed and a solution is proposed. The three FQs were detected in all the sewage samples tested in this work, with median concentrations between 34 and 251ng/L.

Determination of endocrine-disrupting phenols, acidic pharmaceuticals, and personal-care products in sewage by solid-phase extraction and gas chromatography-mass spectrometry.

The occurrence, fate, and effects of phenols with endocrine-disrupting properties as well as some pharmaceuticals and personal-care products in the environment have frequently been discussed in recent literature. In many cases, these compounds were determined by using individual methods which can be time-consuming if results for multiple parameters are required. Using a solid-phase extraction procedure with an anion exchanger in this work, we have developed and optimized a multi-residue method for the extraction of 21 phenols and acids in sewage influent and effluent. The phenols and acids were then selectively eluted in separate fractions and were converted into pentafluoropropionyl (PFP) and tert-butyldimethylsilyl (TBDMS) derivatives, respectively, for gas chromatography-mass spectrometric (GC/MS) determination. When applied to the sewage samples under study, the results for nonylphenol, bisphenol A (BPA), triclosan (TCS), 17ss-estradiol (E2), estrone (E1), salicylic acid, ibuprofen, naproxen, diclofenac, and a few other acidic drugs were consistent with those determined previously by individual methods. Using the same procedure, we also report, for the first time, the occurrence of 2-phenylphenol and parabens in those sewage samples.