Standardization of natural mycolic acid antigen composition and production for use in biomarker antibody detection to diagnose active tuberculosis.

Mycobacterium tuberculosis, the causative agent of tuberculosis, is characterized by the abundance of species specific, antigenic cell wall lipids called mycolic acids. These wax-like molecules all share an identical, amphiphilic mycolic motif, but have different functional groups in a long hydrophobic hydrocarbon mero-chain that divide them into three main classes: alpha-, keto- and methoxy-mycolic acids. Whereas alpha-mycolic acids constitutively maintain an abundance of around 50%, the ratio of methoxy- to keto-mycolic acid types may vary depending on, among other things, the growth stage of M. tuberculosis. In human patients, antibodies to mycolic acids have shown potential as diagnostic serum biomarkers for active TB. Variations in mycolic acid composition affect the antigenic properties and can potentially compromise the precision of detection of anti-mycolic acids antibodies in patient sera to natural mixtures. We demonstrate this here with combinations of synthetic mycolic acid antigens, tested against TB patient and control sera. Combinations of methoxy- and α-mycolic acids are more antigenic than combinations of keto- and α-mycolic acids, showing the former to give a more sensitive test for TB biomarker antibodies. Natural mixtures of mycolic acids isolated from mature cultures of M. tuberculosis H37Rv give the same sensitivity as that with synthetic methoxy- and α-mycolic acids in combination, in a surface plasmon resonance inhibition biosensor test. To ensure that the antigenic activity of isolates of natural mycolic acids is reproducible, we cultured M. tuberculosis H37Rv on Middlebrook 7H10 solid agar plates to stationary growth phase in a standardized, optimal way. The proportions of mycolic acid classes in various batches of the isolates prepared from these cultures were compared to a commercially available natural mycolic acid isolate. LC-MS/MS and NMR data for quantitation of mycolic acids class compositions show that the variation in batches is small, suggesting that the quality of the results for anti-mycolic acid antibody detection in the TB patients should not be affected by different batches of natural mycolic acid antigens if prepared in a standard way.

In vivo/in vitro pharmacokinetic and pharmacodynamic study of spray-dried poly-(dl-lactic-co-glycolic) acid nanoparticles encapsulating rifampicin and isoniazid.

Poly-(dl-lactic-co-glycolic) acid (PLGA) nanoparticles were prepared by a double emulsion solvent evaporation spray-drying technique and coated with polyethylene glycol (PEG 1% v/v). The PLGA nanoparticles had a small size (229±7.6 to 382±23.9nm), uniform size distribution and positive zeta potential (+12.45±4.53mV). In vitro/in vivo assays were performed to evaluate the pharmacokinetic (PK) and pharmacodynamic (PD) performance of these nanoparticles following nanoencapsulation of the anti-tuberculosis drugs rifampicin (RIF) and isoniazid (INH). The results demonstrated the potential for the reduction in protein binding of these drugs by protection in the polymer core. Furthermore, in vitro efficacy was demonstrated using Mycobacterium tuberculosis (M. tb.) (strain H37Rv). Sustained drug release over seven days were observed for these drugs following once-off oral administration in mice with subsequent drug distribution of up to 10 days in the liver and lungs for RIF and INH, respectively. It was concluded by these studies combined with our previous reports that spray-dried PLGA nanoparticles demonstrate potential for the improvement of tuberculosis chemotherapy by nanoencapsulation of anti-tuberculosis drugs.

In vivo uptake and acute immune response to orally administered chitosan and PEG coated PLGA nanoparticles.

Nanoparticulate drug delivery systems offer great promise in addressing challenges of drug toxicity, poor bioavailability and non-specificity for a number of drugs. Much progress has been reported for nano drug delivery systems for intravenous administration, however very little is known about the effects of orally administered nanoparticles. Furthermore, the development of nanoparticulate systems necessitates a thorough understanding of the biological response post exposure. This study aimed to elucidate the in vivo uptake of chitosan and polyethylene glycol (PEG) coated Poly, DL, lactic-co-glycolic Acid (PLGA) nanoparticles and the immunological response within 24 h of oral and peritoneal administration. These PLGA nanoparticles were administered orally and peritoneally to female Balb/C mice, they were taken up by macrophages of the peritoneum. When these particles were fluorescently labelled, intracellular localisation was observed. The expression of pro-inflammatory cytokines IL-2, IL-6, IL-12p70 and TNF-α in plasma and peritoneal lavage was found to remain at low concentration in PLGA nanoparticles treated mice as well as ZnO nanoparticles during the 24 hour period. However, these were significantly increased in lipopolysaccharide (LPS) treated mice. Of these pro-inflammatory cytokines, IL-6 and IL-12p70 were produced at the highest concentration in the positive control group. The anti-inflammatory cytokines IL-10 and chemokines INF-γ, IL-4, IL-5 remained at normal levels in PLGA treated mice. IL-10 and INF-γ were significantly increased in LPS treated mice. MCP-1 was found to be significantly produced in all groups in the first hours, except the saline treated mice. These results provide the first report to detail the induction of cytokine production by PLGA nanoparticles engineered for oral applications.

Chapter 5 - Detection of antimycolic acid antibodies by liposomal biosensors.

Antibodies to mycolic acid (MA) antigens can be detected as surrogate markers of active tuberculosis (TB) with evanescent field biosensors where the lipid antigens are encapsulated in liposomes. Standard immunoassay such as ELISA, where the lipid antigen is not encapsulated, but directly adsorbed to the well-bottoms of microtiter plates, does not yield the required sensitivity and specificity for accurate diagnosis of TB. One reason for this is the cross-reactivity of natural anticholesterol antibodies with MAs. MAs are the major cell wall lipids of mycobacteria. Mycobacterial MA has immunomodulatory properties and elicits specific antibodies in TB patients. Liposomes were optimized for their use as carriers both for the presentation of immobilized purified mycobacterial MA on sensor surfaces, and as a soluble inhibitor of antibody binding in inhibition assays. By using an inhibition assay in the biosensor, the interference by anticholesterol antibodies is reduced. Here, we describe the MA carrying capacity of liposomes with and without cholesterol as a stabilizing agent, optimized concentration and size of liposomes for use in the biosensor assay, comparison of the methods for wave-guide and surface plasmon resonance biosensors and how the cholesteroid nature of MA can be demonstrated by the biosensor when Amphotericin B is allowed to bind to MA in liposomes.

Enhancing adherence to antiretroviral therapy at the HIV clinic in resource constrained countries; the Tanzanian experience.

OBJECTIVE: To evaluate various strategies aimed at improving adherence to antiretroviral therapy (ART). METHODS: Patients initiated on ART at Muhimbili National Hospital HIV clinic were randomly assigned to either regular adherence counseling, regular counseling plus a calendar, or regular counseling and a treatment assistant. Patients were seen monthly; during these meetings self-reported adherence to treatment was recorded. Disease progression was monitored clinically and immunologically. RESULTS: Of the 621 patients randomized, 312 received regular counseling only, 242 regular counseling and calendars, while 67 had treatment assistants in addition to regular counseling. The mean (SD) follow-up time was 14.5 (4.6) months. During follow-up 20 (3.2%) patients died, and 102 (16.4%) were lost to follow-up; this was similar in all groups. In 94.8% of all visits, patients reported to have adhered to treatment. In only 39 (0.7%) visits did patients report a < or = 95% adherence. There were no differences in adherence (P = 0.573) or differences in CD4 count and weight changes over time in the interventions. CONCLUSIONS: Good adherence to ART is possible in resource constrained countries. Persistent adherence counseling in clinic settings by itself may be effective in improving adherence to ART.

A polymeric system for the intra-oral delivery of an anti-fungal agent.

Oral candidal infections are often persistent and intractable and thus the aim of this study was to develop a polymeric sustained release device to improve the topical treatment of these infections. A self curing system based on poly(ethyl methacrylate) and tetrahydrofurfuryl methacrylate (PEM/THFM) was used with chlorhexidine diacetate (CX) added at levels between 0 and 12% w/w. Water uptake by the device was assessed gravimetrically and CX release measured by UV spectrometry. Anti candidal activity was established by culturing azole sensitive and resistant strains of Candida albicans in the presence of the polymeric delivery device with and without CX. Candidal growth was measured by turbidimetry or surviving colony-forming unit (CFU) formation. There was an initial high release of CX over 24 h followed by a slow diffusion up to 7 days. CX inhibited candidal growth and survival markedly in vitro, with the test samples showing less than 0.5 x 10(-7) CFU/ml compared to controls (3-4 x 10(-7) CFU/ml). These results indicate the potential of a chlorhexidine containing PEM/THFM polymeric system in the treatment of persistent candidal infections.

The water uptake of poly(tetrahydrofurfuryl methacrylate).

Poly(tetrahydrofurfuryl methacrylate) possesses some unique characteristics with respect to its biocompatibility and behaviour in water. The water uptake is high (>70%) and very slow (over 3 yr), but the material remains rigid throughout the process. The mechanism behind the uptake is in two stages; an initial Fickian stage, then as the matrix approaches saturation (about 3 wt%) a second clustering mechanism takes over. The rate of uptake of the second stage of the uptake is controlled by creep (or stress relaxation), and the chemical potential driving the uptake from clustering of the furfuryl rings of the polymer. If clustering or the creep is prevented (by appropriate co-polymerisation) the polymer behaves in an ideal, Fickian manner.

Water sorption behaviour of polymeric systems based on tetrahydrofurfuryl methacrylate.

Earlier research has described the water absorption behaviour, drug release and biological properties of a room temperature polymerizing system based on poly(ethyl methacrylate) (PEM) powder and tetrahydrofurfuryl methacrylate (THFM) monomer. This work has been extended, with respect to water sorption behaviour, by replacing the monomer to various extents with hydroxyethyl methacrylate (HEMA), and poly(ethyl methacrylate) by ethyl methacrylate (EM)-THFM copolymers. Replacing the THFM with HEMA, and gelling with PEM, increased the diffusion coefficient progressively. The replacement of PEM by EM-THFM copolymers, when gelled with THFM monomer, substantially reduced equilibrium water uptake, and increased diffusion coefficients. However, with HEMA monomer, equilibrium uptake was unaffected, but the diffusion coefficient decreased with increasing THFM content of the copolymer. This is due to a complex interaction of THFM cross-linking the copolymer, and the effect of EM on the water uptake. Heat polymerizing the PEM-THFM system reduced equilibrium uptake and the diffusion coefficient, compared with the room temperature polymerizing system; this could reflect molecular weight differences.

Modifications of the hydrophilicity of heterocyclic methacrylate copolymers for protein release.

A series of copolymers comprising ethyl methacrylate (EM) and tetrahydrofurfuryl methacrylate (THFMA) gelled with either THFMA monomer or hydroxyethyl methacrylate (HEMA) monomer have been developed. In this paper, we examine the water uptake characteristics of the polymer systems and address the possibility of increasing the hydrophilicity of the systems by changing the ratios of the copolymers. We have investigated whether protein release from the polymers is related to the composition of the polymer systems. More protein was released from the polymers gelled with the more hydrophilic monomer (HEMA) than with THFMA. This was consistent with the calculated diffusion coefficients, which were 10 times greater for the polymers gelled with HEMA than those gelled with THFMA. Interestingly, the water uptake and protein release profiles were not dependent on the ratio of EM and THFMA in the copolymers. This is probably due to the conflicting roles of THFMA in the copolymer; it is both the more hydrophilic component as well as a cross-linking agent. In addition, it would appear that the structural and surface topography of these polymers had more significant effects on protein release than copolymer composition.