Highly Effective GeNi Alloy Contact Diffusion Barrier for BiSbTe Long-Term Thermal Exposure.

A GeNi alloy diffusion barrier for contacts on bismuth antimony telluride is proposed. Multiple gold contact diffusion barriers were tested at different thermal aging conditions in air and reducing atmospheres. Among all diffusion barriers, the GeNi alloy barrier shows the best performance for bulk samples with no substantial degradation of the contact resistance, no contact color change, and no change of thermoelectric properties. We observed D Au-GeNi = (9.8 ± 2.7) × 10-20 m2/s within the GeNi alloy barrier, which is 4 times smaller than D Au-BiSbTe. The presence of the initial Ge layer also proves to be effective in reducing nickel diffusion yielding D Ni-BiSbTe = (8.57 ± 0.49) × 10-19 m2/s. During GeNi alloy formation, Ge diffusion into BiSbTe produces GeTe, which apparently blocks the van der Waals gaps eliminating Au and Ni fast diffusion pathways. Thermal aging of BiSbTe nanowires shows that Au and Ni diffusion degrades the thermoelectric power factor, whereas the GeNi alloy barrier sample is mostly preserved. The GeNi alloy barrier is a reliable solution to long-term thermal applications of BiTe-based materials.

Nanoscale Carbon Modified α-MnO2 Nanowires: Highly Active and Stable Oxygen Reduction Electrocatalysts with Low Carbon Content.

Carbon-coated α-MnO2 nanowires (C-MnO2 NWs) were prepared from α-MnO2 NWs by a two-step sucrose coating and pyrolysis method. This method resulted in the formation of a thin, porous, low mass-percentage amorphous carbon coating (<5 nm, ≤1.2 wt % C) on the nanowire with an increase in single-nanowire electronic conductivity of roughly 5 orders of magnitude (α-MnO2, 3.2 × 10-6 S cm-1; C-MnO2, 0.52 S cm-1) and an increase in surface Mn3+ (average oxidation state: α-MnO2, 3.88; C-MnO2, 3.66) while suppressing a phase change to Mn3O4 at high temperature. The enhanced physical and electronic properties of the C-MnO2 NWs-enriched surface Mn3+ and high conductivity-are manifested in the electrocatalytic activity toward the oxygen reduction reaction (ORR), where a 13-fold increase in specific activity (α-MnO2, 0.13 A m-2; C-MnO2, 1.70 A m-2) and 6-fold decrease in charge transfer resistance (α-MnO2, 6.2 kΩ; C-MnO2, 0.9 kΩ) were observed relative to the precursor α-MnO2 NWs. The C-MnO2 NWs, composed of ∼99 wt % MnO2 and ∼1 wt % carbon coating, also demonstrated an ORR onset potential within 20 mV of commercial 20% Pt/C and a chronoamperometric current/stability equal to or greater than 20% Pt/C at high overpotential (0.4 V vs RHE) and high temperature (60 °C) with no additional conductive carbon.

Laser Direct Write Synthesis of Lead Halide Perovskites.

Lead halide perovskites are increasingly considered for applications beyond photovoltaics, for example, light emission and detection, where an ability to pattern and prototype microscale geometries can facilitate the incorporation of this class of materials into devices. Here we demonstrate laser direct write of lead halide perovskites, a remarkably simple procedure that takes advantage of the inverse dependence between perovskite solubility and temperature by using a laser to induce localized heating of an absorbing substrate. We demonstrate arbitrary pattern formation of crystalline CH3NH3PbBr3 on a range of substrates and fabricate and characterize a microscale photodetector using this approach. This direct write methodology provides a path forward for the prototyping and production of perovskite-based devices.

Measurement of electronic states of PbS nanocrystal quantum dots using scanning tunneling spectroscopy: the role of parity selection rules in optical absorption.

We study the structure of electronic states in individual PbS nanocrystal quantum dots by scanning tunneling spectroscopy (STS) using one-to-two monolayer nanocrystal films treated with 1, 2-ethanedithiols (EDT). Up to six individual valence and conduction band states are resolved for a range of quantum dot sizes. The measured states' energies are in good agreement with calculations using the k · p four-band envelope function formalism. A comparison of STS and optical absorption spectra indicates that some of the absorption features can only be explained by asymmetric transitions involving the states of different symmetries (e.g., S and P or P and D), which points towards the relaxation of the parity selection rules in these nanostructures. STS measurements also reveal a midgap feature, which is likely similar to one observed in previous charge transport studies of EDT-treated quantum dot films.

Binary ionic porphyrin nanosheets: electronic and light-harvesting properties regulated by crystal structure.

Crystalline solids self-assembled from anionic and cationic porphyrins provide a new class of multifunctional optoelectronic micro- and nanomaterials. A 1 : 1 combination of zinc(II) tetra(4-sulfonatophenyl)porphyrin (ZnTPPS) and tin(IV) tetra(N-methyl-4-pyridiniumyl)porphyrin (SnTNMePyP) gives porphyrin nanosheets with high aspect ratios and varying thickness. The room temperature preparation of the nanosheets has provided the first X-ray crystal structure of a cooperative binary ionic (CBI) solid. The unit cell contains one and one-half molecules of aquo-ZnTPPS(4-) (an electron donor) and three half molecules of dihydroxy-SnTNMePyP(4+) (an electron acceptor). Charge balance in the solid is reached without any non-porphyrinic ions, as previously determined for other CBI nanomaterials by non-crystallographic means. The crystal structure reveals a complicated molecular arrangement with slipped π-π stacking only occurring in isolated dimers of one of the symmetrically unique zinc porphyrins. Consistent with the crystal structure, UV-visible J-aggregate bands indicative of exciton delocalization and extended π-π stacking are not observed. XRD measurements show that the structure of the Zn/Sn nanosheets is distinct from that of Zn/Sn four-leaf clover-like CBI solids reported previously. In contrast with the Zn/Sn clovers that do exhibit J-aggregate bands and are photoconductive, the nanosheets are not photoconductive. Even so, the nanosheets act as light-harvesting structures in an artificial photosynthesis system capable of reducing water to hydrogen but not as efficiently as the Zn/Sn clovers.

Donor-acceptor biomorphs from the ionic self-assembly of porphyrins.

Microscale four-leaf clover-shaped structures are formed by self-assembly of anionic and cationic porphyrins. Depending on the metal complexed in the porphyrin macrocycle (Zn or Sn), the porphyrin cores are either electron donors or electron acceptors. All four combinations of these two metals in cationic tetra(N-ethanol-4-pyridinium)porphyrin and anionic tetra(sulfonatophenyl)porphyrin result in related cloverlike structures with similar crystalline packing indicated by X-ray diffraction patterns. The clover morphology transforms as the ionic strength and temperature of the self-assembly reaction are increased, but the structures maintain 4-fold symmetry. The ability to alter the electronic and photophysical properties of these solids (e.g., by altering the metals in the porphyrins) and to vary cooperative interactions between the porphyrin subunits raises the possibility of producing binary solids with tunable functionality. For example, we show that the clovers derived from anionic Zn porphyrins (electron donors) and cationic Sn porphyrins (electron acceptors) are photoconductors, but when the metals are reversed in the two porphyrins, the resulting clovers are insulators.