Exploring age and gender variations in root canal morphology of maxillary premolars in Saudi sub population: a cross-sectional CBCT study.

BACKGROUND: In complex teeth like maxillary premolars, endodontic treatment success depends on a complete comprehension of root canal anatomy. The research on mandibular premolars' root canal anatomy has been extensive and well-documented in existing literature. However, there appears to be a notable gap in available data concerning the root canal anatomy of maxillary premolars. This study aimed to explore the root canal morphology of maxillary premolars using cone-beam computed tomography (CBCT) imaging, considering age and gender variations. METHODS: From 500 patient CBCT scans, 787 maxillary premolar teeth were evaluated. The sample was divided by gender and age (10-20, 21-30, 31-40, 41-50, 51-60, and 61 years and older). Ahmed et al. classification system was used to record root canal morphology. RESULTS: The most frequent classifications for right maxillary 1st premolars were 2MPM1 B1 L1 (39.03%) and 1MPM1 (2.81%), while the most frequent classifications for right maxillary 2nd premolars were 2MPM1 B1 L1 (39.08%) and 1MPM1 (17.85%). Most of the premolars typically had two roots (left maxillary first premolars: 81.5%, left maxillary second premolars: 82.7%, right maxillary first premolars: 74.4%, right maxillary second premolars: 75.7%). Left and right maxillary 1st premolars for classes 1MPM1 and 1MPM1-2-1 showed significant gender differences. For classifications 1MPM1 and 1MPM1-2-1, age-related changes were seen in the left and right maxillary first premolars. CONCLUSION: This study provides novel insights into the root canal anatomy of maxillary premolars within the Saudi population, addressing a notable gap in the literature specific to this demographic. Through CBCT imaging and analysis of large sample sizes, the complex and diverse nature of root canal morphology in these teeth among Saudi individuals is elucidated. The findings underscore the importance of CBCT imaging in precise treatment planning and decision-making tailored to the Saudi population. Consideration of age and gender-related variations further enhances understanding and aids in personalized endodontic interventions within this demographic.

Comparison of the elastic recovery and strain-in-compression of commercial and novel vinyl polysiloxane impression materials incorporating a novel crosslinking agent and a surfactant.

This study aims to formulate experimental vinylpolysiloxane (VPS) impression materials and compare their elastic recovery and strain-in-compressions with three commercial VPS materials (Aquasil, Elite, and Extrude). Five experimental materials (Exp), two hydrophobic (Exp-I and II) and three hydrophilic (Exp-III, IV and V) were developed. Exp 1 contained vinyl-terminated poly-dimethyl siloxane and a conventional cross-linking agent (poly methylhydrosiloxane), while Exp- II contained a novel cross-linking agent that is tetra-functional dimethyl-silyl-ortho-silicate (TFDMSOS). Exp III-V (hydrophilic materials) were formulated by incorporating different concentrations of non-ionic surfactant (Rhodasurf CET-2) into Exp II formulation. Measurement of elastic recovery and strain-in-compression for commercial and experimental materials were performed according to ISO4823 standard using the calibrated mechanical testing machine (Tinius Olsen). One-way analysis of variance (one-way ANOVA) and Tukey's post-hoc (HSD) test were used for statistical analysis and a p-value of ≤ 0.05 was considered significant. Exp-I has statistically similar values to commercial VPS. The Exp-II showed the highest elastic recovery, while % elastic recovery was reduced with the addition of the non-ionic surfactant (Rhodasurf CET-2). The % reduction was directly related to the concentration of Rhodasurf CET-2. In addition, Exp II had significantly higher strain-in-compression values compared to Exp-I and commercial materials. These values were further increased with the addition of a non-ionic surfactant (Rhodasurf CET-2) was added (Exp-III, IV and V).

Evaluation of root and canal morphology of mandibular premolar amongst Saudi subpopulation using the new system of classification: a CBCT study.

BACKGROUND: The clinician should have complete knowledge of the normal anatomy of the root as well as complexities in the root canal configuration for a better outcome, as missed or improper handling of the canal system can lead to the failure of an entire endodontic procedure. The present study aims to assess the morphology of roots and canals in permanent mandibular premolars in the Saudi subpopulation with a new classification system. METHODS: The present study includes 1230 mandibular premolars (645 first premolars and 585-second premolars) from 500 CBCT images of the patients, including retrospective data. iCAT scanner system (Imaging Sciences International, Hatfield, PA, USA) was used to obtain the images; scanning of 8 × 8 cm images was performed at 120 KVp and 5-7 mA with a voxel size of 0.2 mm. The new method of classification presented by Ahmed et al. 2017 was used to record and classify the root canal morphology, followed by recording the differences regarding the age and gender of the patients. Comparison of canal morphology in lower permanent premolars and its association with gender and age of the patients was done by Chi-square test/ Fisher exact test; the significance level was set at 5% (p ≤ 0.05). RESULTS: The left mandibular 1st and 2nd premolars with one root were 47.31%, with two roots were 2.19%. However, three roots (0.24%) and C-shaped canals (0.24%) were reported only in the left mandibular 2nd premolar. The right mandibular 1st and 2nd premolars with one root were 47.56%, with two roots were 2.03%. The overall percentage of the number of roots and canals in the first and second premolars 1 PM 1 (88.38%), 2 PM 1 B 1 L 1 (3.5%), 2 PM B 1 L 1 (0.65%), 1 PM 1-2-1 (3.08%), 1 PM 1-2 (3.17%), 1 PM 1-2-1-2 (0.24%), 3 PMMB 1 DB 1 L1 (0.48%). However, the C-shaped canals (0.40%) were reported in right and left mandibular second premolars. No statistically significant difference was reported between mandibular premolars and gender. A statistically significant difference was reported between mandibular premolars and the age of the study subjects. CONCLUSION: Type I (1 TN 1) was the major root canal configuration in permanent mandibular premolars, which was higher among males. The CBCT imaging provides thorough details about the root canal morphology of lower premolars. These findings could support diagnosis, decision-making, and root canal treatment, for dental professionals.

Evaluating a linkage between obesity and the occurrence of dental caries among school going children in Sakaka, Al Jouf, Kingdom of Saudi Arabia.

Background: Obesity and dental caries are global public health problems. There are conflicting reports about the relationship between caries and obesity. The aim of this study was to analyze the type of relationship between the dental caries and obesity among school children in Al-Jouf region of Saudi Arabia. Methods: This cross-sectional study was conducted among 400 participants aged 6 to 14 years. The study involved measuring caries (dmft/DMFT), assessing body mass index (BMI), and administering a self-completion questionnaire. An independent t-test, one-way ANOVA, and multivariate logistic regression analyses were performed. Results: Out of 400 participants, 380 agreed to participate in the study. Overall caries prevalence among the participants was 76.1% and mean DMFT and dmft values were 2.8 ± 1.0 and 3.7 ± 1.6. Among the factors associated with mean caries scores, relation between DMFT scores and frequency of consumption of sugar was statistically significant (F = 3.82,0.01). Regression models has identified children with increased BMI values has 3.2 times more risk of getting dental caries in permanent teeth (P = 0.001). Conclusion: There was a positive association between obesity and dental caries in school going Saudi Arabian children. Comprehensive multidisciplinary approach by health professionals is recommended for preventive public health issues related to caries and obesity in teenagers.

Validation and Reliability Testing of the Child Oral Impacts on Daily Performances (C-OIDP): Cross-Cultural Adaptation and Psychometric Properties in Pakistani School-Going Children.

Background: This study aimed to develop an Urdu version of Child-Oral Impact on Daily Performance (C-OIDP) and assess its reliability and validity for children's oral health-related quality of life (OHRQoL) assessment in Pakistan. Methods: A total of 200 school-going children aged 11−14 were recruited from two public schools. For the adaptation process, the original English version of C-OIDP was translated into Urdu, reviewed by an expert committee, back-translated into Urdu, and then reviewed again by the same expert committee and pilot tested on 10 children. A clinical examination was carried out to record dental and gingival status followed by a face-to-face interview to measure oral health-related quality of life in children using C-OIDP-U. Reliability, internal consistency, construct and discriminant validity were assessed. Results: The Cronbach's alpha for C-OIDP-U was 0.69, the mean C-OIDP-U score was 10.2 ± 8.1 and 77.3% of the children reported at least one oral impact. Eating (40.3%) and difficulty in cleaning mouth (38.7%) were the two most impacted daily performances. For construct validity, the associations were significant between the C-OIDP-U score and all subjective oral health measures (p < 0.001). For discriminant validity, a significant association was observed between the C-OIDP-U score and clinical oral variables, children with DMFT + dmft ≥ 1, Gingival index > 1 and having malocclusion reported a higher C-OIDP-U score when compared to their counterparts. Conclusion: This study showed that C-OIDP is a valid, reliable and efficient instrument of OHRQoL for use in Pakistani children.

Bone Marrow Mesenchymal Stromal Cells (BMMSCs) Augment Osteointegration of Dental Implants in Type 1 Diabetic Rabbits: An X-Ray Micro-Computed Tomographic Evaluation.

Background and objectives: The study aimed to investigate the effect of bone marrow mesenchymal stromal cells (BMMSCs) on implant-bone osseointegration in type I diabetic New Zealand rabbits. Materials and methods: BMMSCs harvested from healthy rabbits were processed and validated for purity and osteocyte differentiability. Mandibular incisors of diabetic and control rabbits were carefully extracted, and the sockets were plugged with collagen sponges. Platelet-rich plasma (PRP) containing osteoinductive BMMSCs, and plain PRP were injected into the collagen sponge of the right and left sockets respectively. Dental implants of 2.6 mm diameter and 10 mm length were inserted into the collagen sponge of both sockets. All the animals were sacrificed six weeks post surgery to evaluate an early stage of osseointegration; the mandibles scanned by X-ray microcomputed tomography (µCT) and subjected to 3D analysis. The µCT parameters of the right implant were paired against that of the left side of each animal and analyzed by paired T-test. Results: The preclinical evaluation of the viability and osteocyte differentiation of the BMMSCs were consistent between both the donor samples. The osseointegration of dental implants with stem cell therapy (BMMSCs + PRP + collagen) in normal and diabetic rabbits was significantly higher than that of implants with adjunctive PRP + collagen only (p < 0.05). Conclusion: Stem Cell therapy with osteoinductive BMMSCs and PRP can offer a novel approach to enhance the osseointegration of dental implants in uncontrolled diabetic patients.

Surface wettability and nano roughness at different grit blasting operational pressures and their effects on resin cement to zirconia adhesion.

This study analyzed the effect of grit blasting pressures on resin cement to zirconia (ZrO2) adhesion using enclosed mold shear bond test (EM-SBS). ZrO2 blanks were pre-treated with Rocatec™ Soft as follows: group 1: control, group 2: specimens treated at 80 kPa, group 3: at 180 kPa, group 4: at 280 kPa, and group 5: at 380 kPa. Monobond® N and Multilink® Speed were used as the silane and resin cement, respectively. Next, the blanks were assigned into three sub-groups (n=8, N=108) according to storage conditions. A non-linear relation was observed between EM-SBS and contact angle versus grit blasting pressure (r=-0.542, p=0.01). According to ANOVA (p<0.05), the EM-SBS values with both 180 kPa (17.4±6.7 MPa) and 280 kPa (19.4±4.8 MPa) were statistically higher after 12,000 thermo-cycles. Relatively equal thermo-cycled bond strength might also be achieved with intermediate (180 kPa) grit blasting pressure instead of the recommended 280 kPa.

Enhanced resin titanium adhesion with silane primers using tribochemical silica-coating.

Experimental silane primers and a urethane dimethacrylate resin were prepared to resin titanium bonding. Commercially pure 2 Ti coupons were pretreated and randomly assigned into groups: group-SM (ESPE Sil™+Multilink® Speed), group-SE (ESPE Sil™+experimental resin), group-AM (1.0 vol% 3-acryloxypropyltrimethoxysilane+Multilink® Speed), group-AE (1.0 vol% 3-acryloxypropyltrimethoxysilane+experimental resin), group-BM (1.0 vol% 3-acryloxypropyltrimethoxysilane+0.5 vol% bis-(1,2-triethoxysilyl)ethane+Multilink® Speed), and group-BE (1.0 vol% 3-acryloxypropyltrimethoxysilane+0.5 vol% bis-(1,2-triethoxysilyl) ethane+experimental resin). Specimens were stored in a desiccator for 24 h, and artificially aged by thermo-cycling (6,000 and 12,000 cycles). According to ANOVA and the Tukey's test (n=10, α=0.05), the mean enclosed mold shear bond strength after 24 h was highest in group-AE (26.2±4.0 MPa). After 12,000 thermo-cycles, the group-BM exhibited the highest adhesion strength (13.4±3.2 MPa). This study suggests that a silane primer (3-acryloxypropyltrimethoxysilane+0.5 vol% bis-(1,2-triethoxysilyl)ethane) might enhance adhesion strength.

Spectrophotometric assessment of different surface coating materials on conventional glass ionomer cement.

The purpose of this in vitro study was to analyse the absorbance of dye material in conventional glass ionomer cement (GIC) by applying various commercially available surface protecting layers on GIC. 90 disc-shaped specimens were made using brass mold measuring 7mm in diameter and 2mm in thickness. 30 specimens were selected for each week testing having 6 groups (n=5). The groups were: G1 (Control group), G2 (Nail polish coated GIC), G3 (Master bond coated GIC), G4 (Copal varnish coated GIC), G5 (Varnal coated GIC), G6 (Cold mold seal coated GIC). The specimens of each group were immersed in a separate test tube filled with methylene blue dye, and placed in an incubator (37°C±2°C) for 1 week, 2 weeks and 3 weeks' time. After required time period, the specimens were rinsed under distal water for 1 minute and air dried for 1 hour. Next, the specimens of each group were put into new test tubes containing 1ml absolute alcohol and again stored at (37°C±2°C) for 24 hours. Absorbance were recorded in ultravoilet spectrophotometer. Results were analysed by Student t-test and Pearson's correlation. The results suggest that varnal and copal varnish are effective protecting materials with significant difference (P<0.01) after 3 weeks time. Our results conclude that the application of suitable protecting material may lead to longevity of GIC restorative biomaterial in a complexed oral environment.

Direct restoration modalities of fractured central maxillary incisors: A multi-levels validated finite elements analysis with in vivo strain measurements.

OBJECTIVE: To quantify the influence of fracture geometry and restorative materials rigidity on the stress intensity and distribution of restored fractured central maxillary incisors (CMI) with particular investigation of the adhesive interfaces. Ancillary objectives are to present an innovative technology to measure the in vivo strain state of sound maxillary incisors and to present the collected data. METHODS: A validation experimental biomechanics approach has been associated to finite element analysis. FEA models consisted of CMI, periodontal ligament and the corresponding alveolar bone process. Three models were created representing different orientation of the fracture planes. Three different angulations of the fracture plane in buccal-palatal direction were modeled: the fracture plane perpendicular to the long axis in the buccal-palatal direction (0°); the fracture plane inclined bucco-palatally in apical-coronal direction (-30°); the fracture plane inclined palatal-buccally in apical-coronal direction (+30°). First set of computing runs was performed for in vivo FE-model validation purposes. In the second part, a 50N force was applied on the buccal aspect of the CMI models. Ten patients were selected and subjected to the strain measurement of CMI under controlled loading conditions. RESULTS: The main differences were noticed in the middle and incisal thirds of incisors crowns, due to the presence of the incisal portion restoration. The stress intensity in -30° models is increased in the enamel structure close to the restoration, due to a thinning of the remaining natural tissues. The rigidity of the restoring material slightly reduces such phenomenon. -30° model exhibits the higher interfacial stress in the adhesive layer with respect to +30° and 0° models. The lower stress intensity was noticed in the 0° models, restoration material rigidity did not influenced the interfacial stress state in 0° models. On the contrary, material rigidity influenced the interfacial stress state in +30° and -30° models, higher rigidity restoring materials exhibits lower interfacial stress with respect to low rigidity materials. SIGNIFICANCE: Fracture planes inclined palatal-buccally in apical-coronal direction (+30°) reduce the interfacial stress intensity and natural tissues stress intensity with respect to the other tested configurations.