ABSTRACT
Belt grinding of flat surfaces of typical parts made of steel and alloys, such as grooves, shoulders, ends, and long workpieces, is a good alternative to milling. Several factors can influence the belt grinding process of flat surfaces of metals, such as cutting speed and pressure. In this work, the importance of pressure in the belt grinding was investigated in terms of technological and experimental aspects. The grinding experiments were performed on structural alloy steel 30KhGSN2/30KhGSNA, structural carbon steel AISI 1045, corrosion-resistant and heat-resistant stainless steel AISI 321, and heat-resistant nickel alloy KHN77TYuR. The performance of the grinding belt was investigated in terms of surface roughness, material removal rate (MRR), grinding belt wear, performance index. Estimated indicators of the belt grinding process were developed: cutting ability; reduced cutting ability for belt grinding of steels and heat-resistant alloy. It was found that with an increase in pressure p, the surface roughness of the processed surface Ra decreased while the tool wear VB and MRR increased. With a decrease in plasticity and difficulty of machinability, the roughness, material removal rate, reduced cutting capacity (Performance index) qper, material removal Q decreased, and the tool wear VB increased. The obtained research results can be used by technologists when creating belt grinding operations for steels and alloys to ensure the required performance is met.
ABSTRACT
This paper presents the research results of one of the main technological parameters of belt grinding, i.e., the cutting speed while machining corrosion- and heat-resistant, structural carbon and structural alloy steels, aluminum, and heat-resistant nickel alloys. Experimental and analytical methods are used to establish the dependence of the output parameters of surface belt grinding on the cutting speed and tool characteristics. An analytical model, considering the physical and mechanical properties of the grinding belt (strength depending on the base and bond; the thermal conductivity; the type of grinding operation) and the machined material, is created to determine the belt grinding speed. The output parameters, such as the arithmetic mean of the surface roughness (Ra) and the material removal rate (MRR) during the belt grinding of steels, heat-resistant and light alloys, have been studied. Based on the empirical dependencies of the belt grinding parameters, the model was developed for the selection and setting of the cutting speed of belt grinding for the aforementioned alloys, taking into account the type of operation, the type of the machined material, and the main characteristics of the sanding belt.
ABSTRACT
This article presents a methodology for designing belt grinding operations with grinding and lapping machines. It provides the results of a study on the machinability of various steels and alloys with belt grinding, which are then classified according to an indicator that we have developed. Namely, cast aluminum alloys, structural alloy steels, structural carbon steels, corrosion-resistant and heat-resistant stainless steels, and heat-resistant nickel alloys have been investigated. The machinability index is the ratio of the performance indicators of the grinding belt and the depth of cut to the indicators of grade 45 structural carbon steels (similar to steel AISI 1045) and similar steels and alloys. The performance indicators of the grinding belt are chosen from a set of calculated and estimated indicators. Experimentally determining the dependences of the performance indicators on the belt grinding modes and conditions, taking into account the established levels of machinability, allowed us to develop recommendations for designing belt grinding operations with grinding and lapping machines. The proposed methodology for designing belt grinding operations guarantees optimal performance and ensures that the necessary quality of the machinable surfaces is achieved. At the same time, it takes into account variable machining conditions, which change within specified limits.
