ABSTRACT
Volumetric muscle loss (VML) is traumatic, degenerative, or surgical loss of skeletal muscle that exceeds the regenerative capacity of the remaining muscle, thus resulting in impaired muscle function. In humans, the loss of 30% or more mass of any one muscle will result in permanent structural and functional loss. Current VML repair treatments are limited by donor site morbidity and graft tissue availability, necessitating alternative muscle graft sources. To address this need, our lab has fabricated tissue-engineered skeletal muscle units (SMUs) for implantation into a 30 % VML model in the tibialis anterior (TA) muscle of rat. Previous results showed that after 28 days in vivo, muscle with a 30% VML repaired with our SMUs produced significantly more force than muscle with acute VML. But repair with our SMU did not fully restore muscle force production to that of native muscle. Thus, we hypothesized that more time for in vivo tissue regeneration would allow for greater force recovery. Therefore, the purpose of this study was to examine the long-term (3-month) effects of our SMUs on a 30% VML repair. We also assessed the effects of reinnervation by redirecting a branch of the peroneal nerve to the repair site. Thirty-nine, 2-month old female F344 rats were separated into a nonsurgical control group (n=5) and four surgical experimental groups (VML Only, n=5; VML+Nerve Redirect, n=6; VML+SMU, n=5; VML+SMU+ Nerve Redirect, n=8). Experimental rats were allowed a 3-month recovery period post-surgery before undergoing in situ force testing of the surgical (left) TA. The left TA of the control animals also underwent in situ force testing. Finally, the surgical (left) and contralateral (right) TAs of the experimental animals, as well as the left TA of the control animals, were explanted for histological analysis. Results for specific force showed that while all groups recovered specific forces similar to that of native muscle, the two SMU groups had significantly higher specific forces, on average, compared to the uninjured control group. Histological staining showed small muscle fibers in the repair site in animals that received an SMU. The average cross-sectional area of the native fibers just outside the area of repair (or the equivalent area in control animals) was not significantly different between groups, indicating that hypertrophy of remaining fibers did not contribute to the recovery of force following the VML. Our results suggest that following a 30% VML of the TA muscle, all surgical groups were able to recover TA mass, maximum tetanic and specific force production. Thus, creating a 30% VML in the TA in a rat model is not enough a sufficient VML to produce the sustained VML seen in humans following similar 30% loss of muscle volume.
ABSTRACT
Volumetric muscle loss (VML) is a loss of skeletal muscle that results in a sustained impairment of function and is often accompanied by physical deformity. To address the need for more innovative repair options, our laboratory has developed scaffold-free, multiphasic tissue-engineered skeletal muscle units (SMUs) to treat VML injuries. In our previous work, using the concept of the "body as a bioreactor", we have shown that implantation promotes the maturation of our SMUs beyond what is possible in vitro. Thus, in this study we sought to better understand the effect of implantation on the maturation of our SMUs, including the effects of implantation on SMU force production and cellular remodeling. We used an ectopic implantation so that we could more easily dissect the implanted tissues post-recovery and measure the force contribution of the SMU alone and compare it to pre-implantation values. This study also aimed to scale up the size of our SMUs to enable the replacement of larger volumes of muscle in our future VML studies. Overall, implantation resulted in extensive maturation of the SMUs, as characterized by an increase in force production, substantial integration with native tissue, innervation, vascularization, and the development of structural organization similar to native tissue.
ABSTRACT
Our lab showed that administration of dexamethasone (DEX) stimulated myogenesis and resulted in advanced structure in our engineered skeletal muscle units (SMU). While administration of 25 nM DEX resulted in the most advanced structure, 10 nM dosing resulted in the greatest force production. We hypothesized that administration of 25 nM DEX during the entire fabrication process was toxic to the cells and that administration of DEX at precise time points during myogenesis would result in SMU with a more advanced structure and function. Thus, we fabricated SMU with 25 nM DEX administered at early proliferation (days 0-4), late proliferation (days 3-5), and early differentiation (days 5-7) stages of myogenesis and compared them to SMU treated with 10 nM DEX (days 0-16). Cell proliferation was measured with a BrdU assay (day 4) and myogenesis was examined by immunostaining for MyoD (day 4), myogenin (day 7), and α-actinin (day 11). Following SMU formation, isometric tetanic force production was measured. An analysis of cell proliferation indicated that 25 nM DEX administered at early proliferation (days 0-4) provided 21.5% greater myogenic proliferation than 10 nM DEX (days 0-4). In addition, 25 nM DEX administered at early differentiation (days 5-7) showed the highest density of myogenin-positive cells, demonstrating the greatest improvement in differentiation of myoblasts. However, the most advanced sarcomeric structure and the highest force production were exhibited with sustained administration of 10 nM DEX (days 0-16). In conclusion, alteration of the timing of 25 nM DEX administration did not enhance the structure or function of our SMU. SMU were optimally fabricated with sustained administration of 10 nM DEX.
Subject(s)
Dexamethasone/therapeutic use , Animals , Dexamethasone/pharmacokinetics , Dexamethasone/pharmacology , Female , Humans , Muscle, Skeletal/physiology , Rats , Rats, Inbred F344 , Tissue Engineering/methodsABSTRACT
The growing deficit in suitable tissues for patients awaiting organ transplants demonstrates the clinical need for engineered tissues as alternative graft sources. Demonstrating safety and efficacy by tracking the migration and fate of implanted cells is a key consideration required for approval of promising engineered tissues. Cells from transgenic animals that express green fluorescent protein (GFP) are commonly used for this purpose. However, GFP can create difficulties in practice due to high levels of green autofluorescence in many musculoskeletal tissues. Tandem-dimer tomato (tdTomato) is a stable, robust red fluorescent protein that is nearly threefold brighter than GFP. Our objective was to create a line of transgenic rats that ubiquitously express tdTomato in all cells, driven by the human ubiquitin C promoter. We sought to determine the rats' utility in tissue engineering applications by fabricating engineered skeletal muscle units (SMUs) from isolated muscle-derived tdTomato cells. These tdTomato SMUs were implanted into a volumetric muscle loss (VML) defect of the tibialis anterior muscle in a rat ubiquitously expressing GFP. We also evaluated a novel method for modularly combining individual SMUs to create a larger engineered tissue. Following a recovery period of 28 days, we found that implantation of the modular SMU led to a significant decrease in the size of the remaining VML deficit. Histological analysis of explanted tissues demonstrated both tdTomato and GFP expression in the repair site, indicating involvement of both implanted and host cells in the regeneration process. These results demonstrate the successful generation of a tdTomato transgenic rat, and the use of these rats in tissue engineering and cell migration applications. Furthermore, this study successfully validated a method for scaling engineered tissues to larger sizes, a factor that will be important for repairing volumetric injuries in more clinically relevant models.
Subject(s)
Cell Movement , Tissue Engineering/methods , Transgenes , Animals , Cell Separation , Cell Tracking , Fluorescence , Green Fluorescent Proteins/metabolism , Implants, Experimental , Muscles/physiology , Rats, Transgenic , RegenerationABSTRACT
Skeletal muscle satellite cells have tremendous therapeutic potential in cell therapy or skeletal muscle tissue engineering. Obtaining a sufficiently pure satellite cell population, however, presents a significant challenge. We hypothesized that size differences between satellite cells and fibroblasts, two primary cell types obtained from skeletal muscle dissociation, would allow for label-free, inertial separation in a microfluidic device, termed a "Labyrinth," and that these purified satellite cells could be used to engineer skeletal muscle. Throughout tissue fabrication, Labyrinth-purified cells were compared with unsorted controls to assess the efficiency of this novel sorting process and to examine potential improvements in myogenic proliferation, differentiation, and tissue function. Immediately after dissociation and Labyrinth sorting, cells were immunostained to identify myogenic cells and fibroblast progenitors. Remaining cells were cultured for 14 days to form a confluent monolayer that was induced to delaminate and was captured as a 3D skeletal muscle construct. During monolayer development, myogenic proliferation (BrdU assay on Day 4), differentiation and myotube fusion index (α-actinin on Day 11), and myotube structural development (light microscopy on Day 14) were assessed. Isometric tetanic force production was measured in 3D constructs on Day 16. Immediately following sorting, unsorted cells exhibited a myogenic purity of 39.9% ± 3.99%, and this purity was enriched approximately two-fold to 75.5% ± 1.59% by microfluidic separation. The BrdU assay on Day 4 similarly showed significantly enhanced myogenic proliferation: in unsorted controls 47.0% ± 2.77% of proliferating cells were myogenic, in comparison to 61.7% ± 2.55% following purification. Myogenic differentiation and fusion, assessed by fusion index quantification, showed improvement from 82.7% ± 3.74% in control to 92.3% ± 2.04% in the purified cell population. Myotube density in unsorted controls, 18.6 ± 3.26 myotubes/mm2, was significantly enriched in the purified cell population to 33.9 ± 3.74 myotubes/mm2. Constructs fabricated from Labyrinth-purified cells also produced significantly greater tetanic forces (143.6 ± 16.9 µN) than unsorted controls (70.7 ± 8.03 µN). These results demonstrate the promise of microfluidic sorting in purifying isolated satellite cells. This unique technology could assist researchers in translating the regenerative potential of satellite cells to cell therapies and engineered tissues.
Subject(s)
Cell Culture Techniques/methods , Cell Separation/methods , Microfluidics/methods , Satellite Cells, Skeletal Muscle/cytology , Tissue Engineering/methods , Animals , Cell Adhesion , Cell Differentiation , Cell Proliferation , Cells, Cultured , Mice , Mice, Inbred C57BL , Muscle Development , Rats , Rats, Wistar , Satellite Cells, Skeletal Muscle/metabolismABSTRACT
The lack of tools for assessing engineered tissue viability and function in a noninvasive manner is a major regulatory and translational challenge facing tissue engineers. Label-free, nonlinear optical molecular imaging (OMI) has utilized endogenous nicotinamide adenine dinucleotide and flavin adenine dinucleotide fluorescence to indicate metabolic activity. Similarly, second harmonic generation (SHG) signals from myosin and collagen can measure overall muscle structural integrity and function. The purpose of this study was to demonstrate these OMI techniques for the first time in engineered skeletal muscle and to develop a novel method for evaluating our engineered skeletal muscle units (SMUs) before implantation. Three experimental groups were studied: Control, Steroid Supplemented, and Metabolically Stressed SMUs. After imaging and analysis in ImageJ, a redox ratio (RR) metric was calculated to indicate metabolic activity, and a structure ratio metric was calculated to reflect structural composition. In addition, function was evaluated as tetanic force production in response to electrical stimulation. In living tissues, the RRs successfully distinguished control and metabolically stressed SMUs in both monolayer and 3D form. OMI of myosin and collagen SHG similarly differentiated control SMUs from the steroid supplemented group. With respect to function, steroid supplementation significantly increased active force generation. When comparing functional and OMI measures, a significant correlation was present between overall myosin density and active force generation. This work demonstrates the potential for using label-free OMI to evaluate tissue-engineered skeletal muscle constructs. The positive correlation between structural OMI measures and force production suggests that OMI could potentially serve as an accurate predictor of functional behaviors, such as integration and tissue regeneration, after implantation. This noninvasive OMI methodology, demonstrated for the first time in engineered skeletal muscle, could prove invaluable for assessing our tissue engineering technology and confirming release criteria for validation.
Subject(s)
Microscopy, Fluorescence, Multiphoton/methods , Muscle, Skeletal/metabolism , Staining and Labeling , Tissue Engineering/methods , Animals , Collagen/metabolism , Female , Flavin-Adenine Dinucleotide/metabolism , Molecular Imaging , Muscle Contraction , Myosins/metabolism , NAD/metabolism , Optical Imaging , Rats, Inbred F344 , Signal Processing, Computer-AssistedABSTRACT
Tissue-engineered skeletal muscle holds promise as a source of graft tissue for repair of volumetric muscle loss and as a model system for pharmaceutical testing. To reach this potential, engineered tissues must advance past the neonatal phenotype that characterizes the current state of the art. In this review, we describe native skeletal muscle development and identify important growth factors controlling this process. By comparing in vivo myogenesis to in vitro satellite cell cultures and tissue engineering approaches, several key similarities and differences that may potentially advance tissue-engineered skeletal muscle were identified. In particular, hepatocyte and fibroblast growth factors used to accelerate satellite cell activation and proliferation, followed by addition of insulin-like growth factor as a potent inducer of differentiation, are proven methods for increased myogenesis in engineered muscle. Additionally, we review our recent novel application of dexamethasone (DEX), a glucocorticoid that stimulates myoblast differentiation, in skeletal muscle tissue engineering. Using our established skeletal muscle unit (SMU) fabrication protocol, timing- and dose-dependent effects of DEX were measured. The supplemented SMUs demonstrated advanced sarcomeric structure and significantly increased myotube diameter and myotube fusion compared to untreated controls. Most significantly, these SMUs exhibited a fivefold rise in force production. Thus, we concluded that DEX may serve to improve myogenesis, advance muscle structure, and increase force production in engineered skeletal muscle.
Subject(s)
Intercellular Signaling Peptides and Proteins/metabolism , Muscle, Skeletal/physiology , Tissue Engineering/methods , Animals , Humans , Muscle Development , Regeneration , Satellite Cells, Skeletal Muscle/cytologyABSTRACT
Tissue engineered skeletal muscle has potential for application as a graft source for repairing soft tissue injuries, a model for testing pharmaceuticals, and a biomechanical actuator system for soft robots. However, engineered muscle to date has not produced forces comparable to native muscle, limiting its potential for repair and for use as an in vitro model for pharmaceutical testing. In this study, we examined the trophic effects of dexamethasone (DEX), a glucocorticoid that stimulates myoblast differentiation and fusion into myotubes, on our tissue engineered three-dimensional skeletal muscle units (SMUs). Using our established SMU fabrication protocol, muscle isolates were cultured with three experimental DEX concentrations (5, 10, and 25 nM) and compared to untreated controls. Following seeding onto a laminin-coated Sylgard substrate, the administration of DEX was initiated on day 0 or day 6 in growth medium or on day 9 after the switch to differentiation medium and was sustained until the completion of SMU fabrication. During this process, total cell proliferation was measured with a BrdU assay, and myogenesis and structural advancement of muscle cells were observed through immunostaining for MyoD, myogenin, desmin, and α-actinin. After SMU formation, isometric tetanic force production was measured to quantify function. The histological and functional assessment of the SMU showed that the administration of 10 nM DEX beginning on either day 0 or day 6 yielded optimal SMUs. These optimized SMUs exhibited formation of advanced sarcomeric structure and significant increases in myotube diameter and myotube fusion index, compared with untreated controls. Additionally, the optimized SMUs matured functionally, as indicated by a fivefold rise in force production. In conclusion, we have demonstrated that the addition of DEX to our process of engineering skeletal muscle tissue improves myogenesis, advances muscle structure, and increases force production in the resulting SMUs.
Subject(s)
Dexamethasone/pharmacology , Satellite Cells, Skeletal Muscle/cytology , Tissue Engineering/methods , Animals , Cell Differentiation/drug effects , Cell Fusion , Cell Line , Cell Proliferation/drug effects , Female , Fibroblasts/cytology , Fibroblasts/drug effects , Mice , Muscle Development/drug effects , Muscle Fibers, Skeletal/cytology , Muscle Fibers, Skeletal/drug effects , Rats, Inbred F344 , Satellite Cells, Skeletal Muscle/drug effects , Satellite Cells, Skeletal Muscle/ultrastructureABSTRACT
Volumetric muscle loss (VML) is the traumatic, degenerative, or surgical loss of muscle tissue, which may result in function loss and physical deformity. To date, clinical treatments for VML--the reflected muscle flap or transferred muscle graft--are limited by tissue availability and donor site morbidity. To address the need for more innovative skeletal muscle repair options, our laboratory has developed scaffoldless tissue-engineered skeletal muscle units (SMUs), multiphasic tissue constructs composed of engineered skeletal muscle with engineered bone-tendon ends, myotendinous junctions, and entheses, which in vitro can produce force both spontaneously and in response to electrical stimulation. Though phenotypically immature in vitro, we have shown that following 1 week of implantation in an ectopic site, our muscle constructs develop vascularization and innervation, an epimysium-like outer layer of connective tissue, an increase in myosin protein content, formation of myofibers, and increased force production. These findings suggest that our engineered muscle tissue survives implantation and develops the interfaces necessary to advance the phenotype toward adult muscle. The purpose of this study was to evaluate the potential of our SMUs to restore muscle tissue to sites of acute VML. Our results indicate that our SMUs continue to mature in vivo with longer recovery times and have the potential to repair VML sites by providing additional muscle fibers to damaged muscles. We conclude from this study that our SMUs have the potential to restore lost tissue volume in cases of acute VML.
Subject(s)
Bioartificial Organs , Muscle, Skeletal/pathology , Muscle, Skeletal/transplantation , Muscular Diseases/pathology , Muscular Diseases/therapy , Prostheses and Implants , Tissue Engineering/methods , Animals , Female , Muscle, Skeletal/growth & development , Organ Size , Rats , Rats, Inbred F344 , Tissue Engineering/instrumentation , Treatment OutcomeABSTRACT
Engineered skeletal muscle holds promise as a source of graft tissue for the repair of traumatic injuries such as volumetric muscle loss. The resident skeletal muscle stem cell, the satellite cell, has been identified as an ideal progenitor for tissue engineering due to its role as an essential player in the potent skeletal muscle regeneration mechanism. A significant challenge facing tissue engineers, however, is the isolation of sufficiently large satellite cell populations with high purity. The two common isolation techniques, single fiber explant culture and enzymatic dissociation, can yield either a highly pure satellite cell population or a suitably large number or cells but fail to do both simultaneously. As a result, it is often necessary to use a purification technique such as pre-plating or cell sorting to enrich the satellite cell population post-isolation. Furthermore, the absence of complex chemical and biophysical cues influencing the in vivo satellite cell "niche" complicates the culture of isolated satellite cells. Techniques under investigation to maximize myogenic proliferation and differentiation in vitro are described in this article, along with current methods for isolating and purifying satellite cells.