Preparation and investigation of core-shell nanoparticles containing human interferon-α.

Sustained release of active interferon-α (IFN-α) has been achieved from core-shell nanoparticles (NPs) prepared by aqueous precipitation of IFN-α-enriched human serum albumin (HSA-IFN-α) and layer-by-layer (L-b-L) by coating of the IFN-α NPs with poly(sodium-4-styrene) sulphonate (PSS) and chitosan (Chit). The concentration and the pH of HSA solution were optimized during the development of this method. Dynamic light scattering (DLS), zeta-potential, thermal analysis (differential scanning calorimetry (DSC) and termogravimetry (TG)), X-ray diffraction (XRD), IFN-α activity and morphology (transmission electron microscope (TEM)) studies were used to control the preparation and analyse the products. The dissolution kinetics of NPs was measured in vitro over 7 days in Hanson dissolution tester with Millex membrane. In vivo studies in Pannon white rabbit detected steady IFN-α plasma level for 10 days after subcutaneous injection administration of the HSA-IFN-α NPs. The IFN-α plasma concentration was detected by using the enzyme-linked immunosorbent assay (ELISA) method. In the present paper we discuss the preparation method, the optimization steps and the results of in vitro and in vivo release studies. It was established that 76.13% HSA-IFN-α are encapsulated in the core-shell NPs.

Chondroitin-Sulfate-A-Coated Magnetite Nanoparticles: Synthesis, Characterization and Testing to Predict Their Colloidal Behavior in Biological Milieu.

Biopolymer coated magnetite nanoparticles (MNPs) are suitable to fabricate biocompatible magnetic fluid (MF). Their comprehensive characterization, however, is a necessary step to assess whether bioapplications are feasible before expensive in vitro and in vivo tests. The MNPs were prepared by co-precipitation, and after careful purification, they were coated by chondroitin-sulfate-A (CSA). CSA exhibits high affinity adsorption to MNPs (H-type isotherm). We could only make stable MF of CSA coated MNPs (CSA@MNPs) under accurate conditions. The CSA@MNP was characterized by TEM (size ~10 nm) and VSM (saturation magnetization ~57 emu/g). Inner-sphere metal-carboxylate complex formation between CSA and MNP was proved by FTIR-ATR and XPS. Electrophoresis and DLS measurements show that the CSA@MNPs at CSA-loading > 0.2 mmol/g were stable at pH > 4. The salt tolerance of the product improved up to ~0.5 M NaCl at pH~6.3. Under favorable redox conditions, no iron leaching from the magnetic core was detected by ICP measurements. Thus, the characterization predicts both chemical and colloidal stability of CSA@MNPs in biological milieu regarding its pH and salt concentration. MTT assays showed no significant impact of CSA@MNP on the proliferation of A431 cells. According to these facts, the CSA@MNPs have a great potential in biocompatible MF preparation for medical applications.

PEGylation of Superparamagnetic Iron Oxide Nanoparticles with Self-Organizing Polyacrylate-PEG Brushes for Contrast Enhancement in MRI Diagnosis.

For biomedical applications, superparamagnetic nanoparticles (MNPs) have to be coated with a stealth layer that provides colloidal stability in biological media, long enough persistence and circulation times for reaching the expected medical aims, and anchor sites for further attachment of bioactive agents. One of such stealth molecules designed and synthesized by us, poly(polyethylene glycol methacrylate-co-acrylic acid) referred to as P(PEGMA-AA), was demonstrated to make MNPs reasonably resistant to cell internalization, and be an excellent candidate for magnetic hyperthermia treatments in addition to possessing the necessary colloidal stability under physiological conditions (Illés et al. J. Magn. Magn. Mater. 2018, 451, 710⁻720). In the present work, we elaborated on the molecular background of the formation of the P(PEGMA-AA)-coated MNPs, and of their remarkable colloidal stability and salt tolerance by using potentiometric acid⁻base titration, adsorption isotherm determination, infrared spectroscopy (FT-IR ATR), dynamic light scattering, and electrokinetic potential determination methods. The P(PEGMA-AA)@MNPs have excellent blood compatibility as demonstrated in blood sedimentation, smears, and white blood cell viability experiments. In addition, blood serum proteins formed a protein corona, protecting the particles against aggregation (found in dynamic light scattering and electrokinetic potential measurements). Our novel particles also proved to be promising candidates for MRI diagnosis, exhibiting one of the highest values of r2 relaxivity (451 mM-1s-1) found in literature.

Polyelectrolyte coating on superparamagnetic iron oxide nanoparticles as interface between magnetic core and biorelevant media.

Nanoparticles do not exist in thermodynamical equilibrium because of high surface free energy, thus they have only kinetic stability. Spontaneous changes can be delayed by designed surface coating. In biomedical applications, superparamagnetic iron oxide nanoparticles (SPIONs) require an optimized coating in order to fulfil the expectation of medicine regulatory agencies and ultimately that of biocompatibility. In this work, we show the high surface reactivity of naked SPIONs due to ≡Fe-OH sites, which can react with H+/OH- to form pH- and ionic strength-dependent charges. We explain the post-coating of naked SPIONs with organic polyacids via multi-site complex bonds formed spontaneously. The excess polyacids can be removed from the medium. The free COOH groups in coating are prone to react with active biomolecules like proteins. Charging and pH- and salt-dependent behaviour of carboxylated SPIONs were characterized quantitatively. The interrelation between the coating quality and colloidal stability measured under biorelevant conditions is discussed. Our coagulation kinetics results allow us to predict colloidal stability both on storage and in use; however, a simpler method would be required to test SPION preparations. Haemocompatibility tests (smears) support our qualification for good and bad SPION manufacturing; the latter 'promises' fatal outcome in vivo.

Decreased Number of Mitochondria in Leukoaraiosis.

BACKGROUND AND AIMS: Leukoaraiosis (LA), one of the most frequent causes of an age-associated cognitive decline, can be associated with a poor quality of life, leading overall to far-reaching public health problems. Chronic hypoxia of the white matter of the brain may be a factor triggering this entity. LA may develop as a consequence of chronically insufficient cellular energy production and the accumulation of free radicals. METHODS: In this context, after hypothesizing that the number of healthy mitochondria can be crucial in this complex process, a case-control LA study was carried out in which we analyzed the numbers of deleted and non-deleted mitochondria (the common D-loop deletion) per white blood cell. A total of 234 patients with LA and 123 MRI alteration-free subjects served as a control group. RESULTS: Interestingly, it emerged that the ratio of deleted relative to non-deleted mitochondria is strongly associated with the risk of LA. The calculated K ratio in the LA group was significantly lower than the K ratio in the controls (LA: K 0.37 95% CI 0.05; controls: K 0.48, 95% CI 0.076, p < 0.001). CONCLUSIONS: Our study suggests that the ratio of the dmDNA and mDNA can be of great importance in the pathogenesis of LA.

GENETIC POLYMORPHISMS OF HUMAN ß-DEFENSINS IN PATIENTS WITH MULTIPLE SCLEROSIS.

AIMS: Recent studies have started to elucidate the contribution of microbiome to the pathogenesis of multiple sclerosis (MS). It is also supposed, that neuropathological alterations might be associated with abnormal expression and regulatory function of antimicrobial peptides (AMPs), including defensins. It is in our interest to investigate the relevance of the single nucleotide polymorphisms (SNPs) of the DEFB1 gene and the copy number polymorphism of the DEFB4 genes in MS. METHODS: DEFBI polymorphisms: c.-20G > A (rsl 1362), DEFB1 c.-44C > G (rsI 800972), DEFB1 c.-52G>A (rsl 799946), and the DEFB4 gene copy number were investigated in 250 MS patients The control patients comprised 232 age- and gender-matched healthy blood donors. The occurrence of the human ß-defensin 2 peptide (hBD2) in the plasma of controls and patients-was determined by ELISA. RESULTS: The DEFB1 c.-44C>G polymorphism the GG protective genotype was much less frequent among patients than among the controls. A higher frequency of a lower (<4) copy number of the DEFB4 gene was observed in the patients with MS as compared with the controls (43% vs. 28%, respectively). The median levels of the circulating hBD2 in the patients were 150.6 +/- 12.71 pg/ml vs. 262.1 +/- 23.82 pg/mI in the control group (p<0.0001). Our results suggest that ß-defensins play role in the development of MS.

Mechanism of in situ surface polymerization of gallic acid in an environmental-inspired preparation of carboxylated core-shell magnetite nanoparticles.

Magnetite nanoparticles (MNPs) with biocompatible coatings are good candidates for MRI (magnetic resonance imaging) contrasting, magnetic hyperthermia treatments, and drug delivery systems. The spontaneous surface induced polymerization of dissolved organic matter on environmental mineral particles inspired us to prepare carboxylated core-shell MNPs by using a ubiquitous polyphenolic precursor. Through the adsorption and in situ surface polymerization of gallic acid (GA), a polygallate (PGA) coating is formed on the nanoparticles (PGA@MNP) with possible antioxidant capacity. The present work explores the mechanism of polymerization with the help of potentiometric acid-base titration, dynamic light scattering (for particle size and zeta potential determination), UV-vis (UV-visible light spectroscopy), FTIR-ATR (Fourier-transformed infrared spectroscopy by attenuated total reflection), and XPS (X-ray photoelectron spectroscopy) techniques. We observed the formation of ester and ether linkages between gallate monomers both in solution and in the adsorbed state. Higher polymers were formed in the course of several weeks both on the surface of nanoparticles and in the dispersion medium. The ratio of the absorbances of PGA supernatants at 400 and 600 nm (i.e., the E4/E6 ratio commonly used to characterize the degree of polymerization of humic materials) was determined to be 4.3, similar to that of humic acids. Combined XPS, dynamic light scattering, and FTIR-ATR results revealed that, prior to polymerization, the GA monomers became oxidized to poly(carboxylic acid)s due to ring opening while Fe(3+) ions reduced to Fe(2+). Our published results on the colloidal and chemical stability of PGA@MNPs are referenced thoroughly in the present work. Detailed studies on biocompatibility, antioxidant property, and biomedical applicability of the particles will be published.

The effect of hydroxyl moieties and their oxosubstitution on bile acid association studied in floating monolayers.

Bile salt aggregates are promising candidates for drug delivery vehicles due to their unique fat-solubilizing ability. However, the toxicity of bile salts increases with improving fat-solubilizing capability and so an optimal combination of efficient solubilization and low toxicity is necessary. To improve hydrophilicity (and decrease toxicity), we substituted hydroxyl groups of several natural bile acid (BA) molecules for oxogroups and studied their intrinsic molecular association behavior. Here we present the comparative Langmuir trough study of the two-dimensional (2D) association behavior of eight natural BAs and four oxoderivatives (traditionally called keto-derivatives) floated on an aqueous subphase. The series of BAs and derivatives showed systematic changes in the shape of the compression isotherms. Two types of association could be distinguished: the first transition was assigned to the formation of dimers through H-bonding and the second to the hydrophobic aggregation of BA dimers. Hydrophobic association of BA molecules in the films is linked to the ability of forming H-bonded dimers. Both H-bond formation and hydrophobic association weakened with increasing number of hydroxyl groups, decreasing distance between hydroxyl groups, and increasing oxosubstitution. The results also show that the Langmuir trough method is extremely useful in selecting appropriate BA molecules to design drug delivery systems.

Chemical and colloidal stability of carboxylated core-shell magnetite nanoparticles designed for biomedical applications.

Despite the large efforts to prepare super paramagnetic iron oxide nanoparticles (MNPs) for biomedical applications, the number of FDA or EMA approved formulations is few. It is not known commonly that the approved formulations in many instances have already been withdrawn or discontinued by the producers; at present, hardly any approved formulations are produced and marketed. Literature survey reveals that there is a lack for a commonly accepted physicochemical practice in designing and qualifying formulations before they enter in vitro and in vivo biological testing. Such a standard procedure would exclude inadequate formulations from clinical trials thus improving their outcome. Here we present a straightforward route to assess eligibility of carboxylated MNPs for biomedical tests applied for a series of our core-shell products, i.e., citric acid, gallic acid, poly(acrylic acid) and poly(acrylic acid-co-maleic acid) coated MNPs. The discussion is based on physicochemical studies (carboxylate adsorption/desorption, FTIR-ATR, iron dissolution, zeta potential, particle size, coagulation kinetics and magnetization measurements) and involves in vitro and in vivo tests. Our procedure can serve as an example to construct adequate physico-chemical selection strategies for preparation of other types of core-shell nanoparticles as well.

Designed polyelectrolyte shell on magnetite nanocore for dilution-resistant biocompatible magnetic fluids.

Magnetite nanoparticles (MNPs) coated with poly(acrylic acid-co-maleic acid) polyelectrolyte (PAM) have been prepared with the aim of improving colloidal stability of core-shell nanoparticles for biomedical applications and enhancing the durability of the coating shells. FTIR-ATR measurements reveal two types of interaction of PAM with MNPs: hydrogen bonding and inner-sphere metal-carboxylate complex formation. The mechanism of the latter is ligand exchange between uncharged -OH groups of the surface and -COO(-) anionic moieties of the polyelectrolyte as revealed by adsorption and electrokinetic experiments. The aqueous dispersion of PAM@MNP particles (magnetic fluids - MFs) tolerates physiological salt concentration at composition corresponding to the plateau of the high-affinity adsorption isotherm. The plateau is reached at small amount of added PAM and at low concentration of nonadsorbed PAM, making PAM highly efficient for coating MNPs. The adsorbed PAM layer is not desorbed during dilution. The performance of the PAM shell is superior to that of poly(acrylic acid) (PAA), often used in biocompatible MFs. This is explained by the different adsorption mechanisms; metal-carboxylate cannot form in the case of PAA. Molecular-level understanding of the protective shell formation on MNPs presented here improves fundamentally the colloidal techniques used in core-shell nanoparticle production for nanotechnology applications.

Enhanced stability of polyacrylate-coated magnetite nanoparticles in biorelevant media.

Magnetite nanoparticles (MNPs) were prepared by alkaline hydrolysis of Fe(II) and Fe(III) chlorides. Adsorption of polyacrylic acid (PAA) on MNPs was measured at pH=6.5±0.3 and I=0.01 M (NaCl) to find the optimal PAA amount for MNP stabilization under physiological conditions. We detected an H-bond formation between magnetite surface groups and PAA by ATR-FTIR measurements, but bonds of metal ion-carboxylate complexes, generally cited in literature, were not identified at the given pH and ionic strength. The dependence of the electrokinetic potential and the aggregation state on the amount of added PAA at various pHs was measured by electrophoretic mobility and dynamic light-scattering methods. The electrokinetic potential of the naked MNPs was low at near physiological pH, but PAA adsorption overcharged the particles. Highly negatively charged, well-stabilized carboxylated MNPs formed via adsorption of PAA in an amount of approximately ten times of that necessary to compensate the original positive charge of the magnetite. Coagulation kinetics experiments revealed gradual enhancement of salt tolerance at physiological pH from ~0.001 M at no added PAA up to ~0.5 M at 1.12 mmol/g PAA. The PAA-coated MNPs exert no substantial effect on the proliferation of malignant (HeLa) or non-cancerous fibroblast cells (MRC-5) as determined by means of MTT assays.

Evaluation of the MTHFR A1298C variant in leukoaraiosis.

Vascular demyelinization of the white matter of the brain is referred to as leukoaraiosis (LA). This very frequent entity is associated with a cognitive decline, thereby resulting in a deteriorating quality of life. Besides poorly controlled hypertension and aging, its development is reported to be associated with an elevated serum homocysteine level. Although the methylenetetrahydrofolate reductase (MTHFR) C677T genetic variant is associated with an elevated serum homocysteine level, it has not been proved to be an independent risk factor for LA. The aim of the present study was to examine whether the MTHFR A1298C genetic variant, which is also believed to be unfavorable, is associated with the presence of LA. The clinical and genetic data on 198 LA patients and 235 neuroimaging alteration-free controls were analyzed. The presence of the A1298C or the 1298CC variant was calculated to be a risk factor for LA, as compared with the absence of both of them. The clustering of the heterozygous A1298C and C677T variants was proved to involve the risk of LA. Our results suggest that the MTHFR A1298C variant confers an independent genetic risk of LA, and this pathological role may be amplified by the MTHFR C677T variant.

[Formation of crystalline calcium phosphate coating on the titanium dioxide layer of dental implants' surface]. / Kristályos kálcium-foszfát bevonat létrehozása fogászati implantátumok felületét borító titán-dioxidon.

Production of octacalcium phosphate crystals on the surface of titanium dioxide particles was achieved at high concentration of titania particles. Optimising the speed of addition of the reagents in the process of crystal growth in heterogeneous nucleation reaction led to reproducible OCP crystal structure on the particle surface. The crystal structure of OCP was investigated by SEM, XRD and FTIR methods. The same crystallization process on the surface of metallic titanium plates did not result in formation of OCP crystals. The evaporated titanium layers on a glass surface and titanium plates without excimer laser treatment did not bond calcium phosphate at any rate. SEM investigations imply that the surface layer of titanium plates changes radically due to laser beam treatment, likely because of oxidation of titanium in the process of evaporation followed by deposition back onto the surface. The calcium phosphate formation on these oxidised titanium plates could be observed by SEM. It can be concluded, that for OCP-formation on titanium metal surface it is necessary to form a thick oxide layer, as the native oxide layer in the case of non-treated titanium substrates did not bound the calcium phosphate, while formation of calcium phosphate could be reached on the laser-treated surface.