Relationship of Maxillary Sinus Volume and Nasal Septum Deviation: A Cone Beam Computed Tomography Study.

The present study was designed to test the hypothesis that there would be a correlation between nasal septum deviation (NSD) and a decreased maxillary sinus volume (MSV) in a Colombian population, using Cone Beam Computed Tomography (CBCT); other sinusal anatomical structures found during the reading were described and analyzed. A retrospective analysis of 537 CBCT scans of adult patients taken between January 2014 and January 2017 included measuring the maxillary sinus diameter in the vertical, horizontal, and sagittal planes. NSD was quantified and related to MSV using the same field of view (FOV). The volume of the right and left maxillary sinuses showed a median and interquartile range (IQR) of 8.18 mm3 (IQR: 6.2-10.33) and 8.3 mm3 (IQR: 6.4-10.36). Statistically significant differences were observed between sex and right and left MSV (p = 0.000), with higher MSV in men. The presence of NSD was observed in 96.81% of the sample and was evaluated in degrees, observing a median of 11° (IQR: 7-16) where 40% of the sample had moderate angles (9-15°). There was no correlation between NSD and a decreased MSV in the population studied. Detailed CBCT analysis with a large FOV is crucial for the analysis of anatomical structures before performing surgical procedures that involve the MS as a preventive diagnostic and therapeutic step for appropriate treatment.

Evaluation of Cortical Thicknesses and Bone Density Values of Mandibular Canal Borders and Coronal Site of Alveolar Crest.

Objectives: The objectives of this retrospective study are to measure the amount of the alveolar crest cortication and cortication around the mandibular canal, and to evaluate bone density values of alveolar crest, cortication around mandibular canal, and possible implant placement area for edentulous sites. Material and Methods: Six hundred forty-two cone-beam computed tomography scans from 642 subjects were evaluated in four centers. Cortical thicknesses of alveolar crest and mandibular canal cortical borders (buccal, lingual, apical, and coronal) in each mandibular posterior teeth region were measured. Bone density of alveolar crest and mandibular canal cortical borders (buccal, lingual, apical, and coronal) in each mandibular posterior teeth region were recorded. The correlations between numeric variables were investigated using Pearson's correlation test. Results: The largest cortical border of the canal was measured 1.1 (SD 0.71) mm at the left second molar area and in coronal side of the mandibular canal (MC). Left and right first premolar regions showed higher bone density values compared to the other sites in all bone density values evaluations. The buccal side of the canal at the right first premolar region showed the highest bone density values (832.32 [SD 350.01]) while the coronal side of the canal at the left second molar region showed the lowest (508.75 [SD 225.47]). The bone density of possible implant placement area at the both left (692.25 [SD 238.25]) and right (604.43 [SD 240.92]) edentulous first premolar showed the highest values. Positive correlations between the bone density values of alveolar crest and the coronal side of MC were found in molar and left second premolar regions (P < 0.05). Conclusions: Results may provide information about the amount of cortication and bone densities tooth by tooth for posterior mandible to surgeons for planning the treatment precisely.

Effects of Crest Morphology on Lingual Concavity in Mandibular Molar Region: an Observational Study.

Objectives: The aim of this radiological study is to evaluate the lingual concavity dimensions and possible implant length in each posterior tooth region according to posterior crest type classification by using cone-beam computed tomography. Material and Methods: According to inclusion criteria, 836 molar teeth regions from 209 cone-beam computed tomography images were evaluated. Posterior crest type (concave, parallel, or convex), possible implant length, lingual concavity angle, width, and depth were recorded. Results: In each posterior tooth region, concave (U-type) crest was detected most frequently while convex (C-type) was the lowest. Possible implant length values were higher in second molar regions than first molars. Lingual concavity width and depth were decreasing from second molars to first molars for both sides. Additionally, lingual concavity angle showed higher values in second molar sites than first molars. In all molar teeth regions, lingual concavity width values were the highest in concave (U-type) crest type while they were the lowest in convex (C-type) crest type (P < 0.05). Lingual concavity angle values were recorded as the highest in concave (U-type) and the lowest in convex (C-type) crest type at the left first molar and right molars (P < 0.05). Conclusions: The lingual concavity dimensions and possible implant length may vary according to crest type and edentulous tooth region. Due to this effect, the surgeons should examine crest type clinically and radiologically. All parameters in the present study are decreasing while moving from anterior to posterior as well as from concave (U-type) to convex (C-type) morphologies.

Assessment of Radiodensity at Mandibular Periapical Bone Sites using Three-Dimensional Cone-Beam Computed Tomography.

Objectives: The aims of this retrospective study were to objectively assess bone density values obtained by cone-beam computed tomography and to map the periapical and inter-radicular regions of the mandibular bone. Material and Methods: In total, periapical bone regions of 6898 roots scanned by cone-beam computed tomography were evaluated retrospectively, and the results were recorded using Hounsfield units (HU). Results: The correlation between periapical HU values of adjacent mandibular teeth were strongly positive (P ˂ 0.01). The anterior region of the mandible yielded highest mean HU value (633.55). The mean periapical HU value of the premolar region (470.58) was higher than that was measured for molar region (374.58). The difference between furcation HU values of the first and second molars was unnoticeable. Conclusions: The results of this study have tried to evaluate the periapical regions of all mandibular teeth, which could ease to predict the bone radiodensity before implant surgery. Even though the Hounsfield units provide the average radio-bone density, a site-specific bone tissue evaluation of each case is essential for appropriate cone-beam computed tomography preoperative planning.

Three-Dimensional Evaluation of Autogenous Ramus Block Graft Donor Site and Its Relation to Mandibular Canal.

Sufficient bone volume is necessary for placing a dental implant in an ideal position. To restore severely insufficient bone volume, autogenous block graft procedures with various intraoral donor sites are presented in the literature. The aims of this retrospective study are to present the dimensions and volume of the potential ramus block graft site, and to evaluate possible effect of mandibular canal diameter and its position in relation to mandibular ramus block graft volume. Two-hundred cone-beam computed tomography (CBCT) images were evaluated. The maximum length, width, height, and volume of the potential ramus block graft site, mandibular canal diameter, mandibular canal-mandibular basis distance, and mandibular canal-crest distance were measured. Mandibular canal diameter, mandibular canal-crest distance, and mandibular canal-mandibular basis distance were 3.139 ± 0.446 mm, 15.376 ± 2.562, and 7.834 ± 1.285 mm, respectively. In addition, the dimensions of the potential ramus block graft sites were measured 11.156 ± 2.297 mm × 10.390 ± 3.420 mm × 8.816 ± 1.720 mm (height × length × width). Moreover, the potential ramus bone block volume was calculated as 1.076 ± 0.398 cm3. While a positive correlation was detected between mandibular canal-crest distance and the potential ramus block graft volume (r = .160, P = .025), a negative correlation was found between mandibular canal-mandibular basis distance and the potential ramus block graft volume (r = -.020, P = .001). Mandibular ramus is one of the predictable intraoral donor sites for bone augmentation procedures. However, ramus has some volumetric limitations related to its neighboring anatomic structures. It seems to be important to evaluate lower jaw in a 3-dimensional manner to prevent surgical complications.

Possible Association between the Quantity of Peri-implant Crevicular Fluid, Clinical Indices, and the Dimensions of Endosseous Implants.

Objectives: The objectives of this clinical observational study are to measure peri-implant crevicular fluid volume based on dental implant diameter and length, and to evaluate the possible relationship between peri-implant crevicular fluid/gingival crevicular fluid volumes and clinical periodontal indices. Material and Methods: The information about length and diameter of dental implants was noted. Clinical indices (probing depth, plaque index, gingival bleeding time index, and gingival index) were recorded. Peri-implant crevicular fluid (PICF)/gingival crevicular fluid (GCF) volumes were measured from 4 sites (mesial, buccal, distal, and lingual/palatal) of each dental implant including its one or more equivalent natural tooth/teeth. Results: One-hundred-sixty-one loaded dental implants and 221 natural teeth of 101 patients were evaluated. The length of dental implant had no effect on PICF volume (P > 0.05). However, PICF volumes of narrow (< 3.5 mm) and wide (> 4.5 mm) diameter implants were higher than standard diameter implants (≥ 3.5 mm, and ≤ 4.5 mm) (P < 0.05). PICF and GCF volumes of areas with peri-implant/periodontal diseases were significantly higher than healthy areas (P < 0.05). PICF and GCF volumes showed positive correlations with clinical indices (P < 0.05). Conclusions: In accordance with the results of the present study, the implant diameter, not the implant length, affects peri-implant crevicular fluid volume.

The Radiological Evaluation of Mandibular Canal Related Variables in Mandibular Third Molar Region: a Retrospective Multicenter Study.

Objectives: The aim of this retrospective study was to investigate anatomical structure of mandibular canal and the factors those increase the possibility of inferior alveolar nerve damage in mandibular third molar region of Turkish population. Material and Methods: Overall 320 participants with 436 mandibular third molars were included from four different study centers. Following variables were measured: type and depth of third molar impaction, position of mandibular canal in relation to third molars, morphology of mandibular canal, cortication status of mandibular canal, possible contact between the third molars and mandibular canal, thickness and density of superior, buccal, and lingual mandibular canal wall, bucco-lingual and apico-coronal mandibular canal diameters on cone-beam computed tomography scans. Results: Lingual mandibular canal wall density and thickness were decreased significantly as the impaction depth of mandibular third molar was increased (P = 0.045, P = 0.001 respectively). Highest buccal mandibular canal wall density and thickness were observed in lingual position of mandibular canal in relation to mandibular third molar (P = 0.021, P = 0.034 respectively). Mandibular canal with oval/round morphology had higher apico-coronal diameter in comparison to tear drop and dumbbell morphologies (P = 0.018). Additionally, mandibular canals with observed cortication border and no contact with mandibular third molar had denser and thicker lingual mandibular canal wall (P = 0.003, P = 0.001 respectively). Conclusions: Buccal and lingual mandibular canal wall density, thickness and mandibular canal diameter may be related with high-risk indicators of inferior alveolar nerve injury.

Impact of bisphosphonate drugs on dental implant healing and peri-implant hard and soft tissues: a systematic review.

OBJECTIVE: Implantology represents the gold standard for oral rehabilitation, unfortunately, often, despite there are no local contraindications to this type of rehabilitation, there are uncertainties regarding the general health of our patients. Many patients nowadays take bisphosphonate drugs, often without first seeking advice from an oral surgeon or a dentist. The purpose of this review is precisely to highlight any contraindications to this type of treatment reported in the literature, in patients who take or have taken bisphosphonate drugs. METHODS: For this study the scientific information sources were consulted using as search terms "("bisphosphonate AND "dental implant")", obtaining 312 results, these were subsequently skimmed according to the inclusion and exclusion criteria, and further evaluated their relevance to the study and the presence of requested outcomes. RESULTS: Only 9 manuscripts (RCTs, Multicentric studies and Clinical Trials) were included in this review, as they respected the parameters of this review, they were analyzed and it was possible to draw important results from them. Surely from this study it is understood that the use of bisphosphonate drugs does not represent an absolute contraindication to implant therapy, it is evident how adequate pharmacological prophylaxis, and an adequate protocol reduce the risks regarding implant failures. Furthermore, the values of marginal bone loss over time seem, even if not statistically significant, to be better in implant rehabilitation with bisphosphonate drugs association. Only a few molecules like risedronate, or corticosteroids, or some conditions like smoking or diabetes have shown a high risk of surgical failure. CONCLUSION: Although this study considered different studies for a total of 378 patients and at least 1687 different dental implants, showing better results in some cases for dental implant therapy in cases of bisphosphonate intake, further clinical, randomized and multicentric studies are needed, with longer follow-ups, to fully clarify this situation which often negatively affects the quality of life of our patients and places clinicians in the face of doubts.

Endosseous Dental Implant Materials and Clinical Outcomes of Different Alloys: A Systematic Review.

In recent years, implantology has made significant progress, as it has now become a safe and predictable practice. The development of new geometries, primary and secondary, of new surfaces and alloys, has made this possible. The purpose of this review is to analyze the different alloys present on the market, such as that in zirconia, and evaluate their clinical differences with those most commonly used, such as those in grade IV titanium. The review, conducted on major scientific databases such as Scopus, PubMed, Web of Science and MDPI yielded a startling number of 305 results. After the application of the filters and the evaluation of the results in the review, only 10 Randomized Clinical Trials (RCTs) were included. Multiple outcomes were considered, such as Marginal Bone Level (MBL), Bleeding on Probing (BoP), Survival Rate, Success Rate and parameters related to aesthetic and prosthetic factors. There are currently no statistically significant differences between the use of zirconia implants and titanium implants, neither for fixed prosthetic restorations nor for overdenture restorations. Only the cases reported complain about the rigidity and, therefore, the possibility of fracture of the zirconium. Certainly the continuous improvement in these materials will ensure that they could be used safely while maintaining their high aesthetic performance.

Association between ridge morphology and complexity of implant placement planning in the posterior mandible.

STATEMENT OF PROBLEM: Uncertainties regarding the 3D ridge morphology of the posterior mandible can greatly increase the risk of surgical complications during dental implant placement. By using cone beam computed tomography (CBCT) imaging and a computer-guided implant treatment software program before any invasive procedure, it is possible to assess ridge morphology and understand the surgical complexity and risk level. PURPOSE: The purpose of this radiological clinical study was to evaluate a large series of CBCT images to evaluate ridge shape variations along posterior mandibular edentulous regions and to clarify their associations with the level of implant planning complexity. MATERIAL AND METHODS: One hundred and twenty CBCT files were analyzed retrospectively for a total 240 hemimandibular sites. Images of each edentulous region of the mandibular first and second premolar and first and second molar sites were evaluated in the sagittal plane. Ridge morphology and implant planning complexity per site were assessed. Categorical variables were presented as number of events and percentages. The chi-square test was used to compare the categorical variables (P=.05). RESULTS: Of 491 partially edentulous mandibular sites, 235 were on the right, and 256 were on the left. Forty-two sites had a distal adjacent tooth, while 266 sites had no distal adjacent tooth. The sagittal bone sections demonstrated oblique (40.53%), straight (31.77%), S-shape (24.24%), hourglass (2.44%), and basal bone (1.02%) ridge morphologies. Implant complexity was deemed straightforward in 66.19% of sites, while 31.6% were identified as advanced and 2.54% as complex. When ridge morphology was evaluated from straight to basal-round bone shape, the implant complexity followed the same trend of change from a straightforward to complex procedure (P=.001) for edentulous second and first molar regions. No significant differences were noted at edentulous second premolar sites (P=.063). The missing second molar sites with oblique morphology were predicted to have 60.9% straightforward complexity, and first molar sites with oblique morphology had 55.8% straightforward implant complexity. Second premolars with straight ridge morphology had 71.7% straightforward complexity, whereas first premolars with the same shape had 92.5% straightforward implant complexity. CONCLUSIONS: Careful evaluation of sagittal CBCT images can provide significant clinical information regarding ridge shape and anticipated surgical complexity before and at the time of implant placement. Surgical complexity is greatest at the most posterior mandibular edentulous sites, and extra attention and caution should be exercised during the surgical planning phases of implant surgery.

Evidence-Based Clinical Outcomes of Immediate and Early Loading of Short Endosseous Dental Implants: A Meta-analysis.

PURPOSE: Short dental implants serve as a valuable alternative for patients with limited bone height. Immediate or early provisionalization facilitates a more physiologic environment for the gingival tissues to be modeled. The purpose of this meta-analysis was to systematically review and evaluate the implant survival and marginal bone loss with immediate and early loading protocols of short dental implants (≤ 6 mm). MATERIALS AND METHODS: A literature search (electronic and manual) was conducted to identify studies with a focused PICO question: "In patients with short dental implants, does loading time affect treatment outcomes?" Studies using an immediate or early loading protocol for restoration of short implants with a mean follow-up of at least 1 year, and refraining from the use of advanced surgical procedures (sinus floor elevation, bone augmentation), were included. After evaluating patient selection and outcome reporting biases, a meta-analysis was conducted to assess implant survival and bone loss for studies fulfilling the inclusion criteria. Bone loss differences between immediate and early loading protocols were evaluated by Student t test, and Spearman correlation analysis was used to analyze the trends between crown-to-implant (C/I) ratio and bone loss. RESULTS: A total of 396 studies with patients receiving short implants (≤ 6 mm) with immediate or early prosthetic loading protocols were identified. For the 7 included studies, the pooled implant survival rate for 322 implants with a follow-up ranging from 1 to 10 years (5 years) was 91.63% (95% CI: 88% to 94%), with a mean bone loss effect estimate of 0.52 ± 0.1 mm (z = 3.07, P < .002). The differences observed in the mean bone loss for studies using immediate loading as opposed to early loading were not statistically significant. A moderate but significant positive correlation was observed between the C/I ratio and mean bone loss levels (r = 0.67, P = .02). CONCLUSION: Short implants with immediate or early loading protocols have satisfactory long-term treatment prospects with satisfactory implant survival rates and minimal bone loss.

Treatment of Excessive Gingival Display by Using Botulinum Toxin-A Targeting Yonsei Points and Zygomatic Major Muscles.

ABSTRACT: The aim of this clinical report is to present satisfying and unsatisfying treatment results of a patient with excessive gingival display (EGD) treated via botulinum toxin injections in different time points. A 22-year-old male patient referred to the Department of Periodontology with a complaint of EGD. The patient opted the treatment with botulinum toxin-A injections. During the first treatment, injections at Yonsei points were performed. After the first EGD treatment, the patient did not satisfy with his smile. The closure of gingival display was not sufficient, especially in posteriors. However, he did not demand for reinjection. Six months after the first treatment, he was advised to have 2 injection points per side including zygomatic major muscles as well as Yonsei points. Two weeks after the second treatment, the patient totally satisfied with his new smile. Yonsei point is a safe and repeatable injection point for the practitioners. However, the authors suggested injections targeting zygomatic major muscles as well as Yonsei point injections to treat the patients with mixed EGD.

Quantity and Quality of Intraoral Autogenous Block Graft Donor Sites with Cone Beam Computed Tomography.

PURPOSE: The autogenous bone block graft is regarded as the gold standard material due to reported osteoconductive, osteoinductive, and osteogenic properties. Various intraoral donor sites for autogenous block grafts are presented in the literature. The aim of this study was to radiographically evaluate the maximum dimensions, volume, and bone quality values of these sites. MATERIALS AND METHODS: According to the inclusion criteria, 50 cone beam computed tomography (CBCT) images from 50 subjects were evaluated. The maximum length, width, height, and volume of autogenous regions where block grafts could be harvested were measured. Radiographic bone quality was calculated by using Hounsfield units derived from CBCT (CBCT-HU). RESULTS: The mean age of 50 subjects (19 men and 31 women) was 55.84 ± 15.9 years. In this study, the symphysis was the largest potential donor site (3.14 ± 1.05 cm3), while maxillary tuberosity was the smallest (0.53 ± 0.34 cm3). These results correlated with bone density values, where the symphysis retained the highest values (937.31 ± 160.59 CBCT-HU) and the maxillary tuberosity had the lowest values (360.87 ± 141.48 CBCT-HU). CONCLUSION: Intraoral bone blocks have restrictions due to surrounding vital anatomical structures. The surgeons should consider these vital structures using accurate CBCT evaluation. The volume and density of the maximal bone harvest from the symphysis was statistically higher in comparison with ramus, palatal, and maxillary tuberosity bone blocks.

A Modification for Treatment of Excessive Gingival Display: Tooth-Based Lip-Repositioning Technique.

Exposure of maxillary gingiva more than 3 mm while smiling is referred to as "excessive gingival display" or "gummy smile." Various treatment options for excessive gingival display are published in the literature, including lip repositioning, crown lengthening, botulinum toxin-A injections, and orthognathic surgeries. This case report aims to present a novel approach to the lip-repositioning procedure for treatment of excessive gingival display. The patient, who visited the department to demand a more esthetic smile, was diagnosed with excessive gingival display caused by hyperactivity of upper lip muscles. Lip repositioning procedure was considered. While evaluating the patient's smile, the amount of gingival display for each tooth region varied. A novel tooth-based modification was planned for the patient for a more precise result. No complication was noted during 10- and 30-day follow-ups. The amount of gingival display while smiling was less than 3 mm for each tooth region. The tooth-based lip-repositioning technique may provide an opportunity to more precisely treat patients with gummy smile.

In-depth morphological evaluation of tooth anatomic lengths with root canal configurations using cone beam computed tomography in North American population.

OBJECTIVE: This study aimed to assess the association between tooth size and root canal morphology by using CBCT analysis. METHODOLOGY: In this retrospective study, tooth anatomic lengths (crown and root lengths, buccolingual and mesiodistal dimensions) of 384 patients were assessed and correlated with Vertucci's root canal morphology classification. Data was analyzed for gender-related differences using the independent sample t-test, ANOVA, and the Pearson's correlation for a possible relation between anatomic lengths and canal morphology. RESULTS: The maxillary first and second premolars showed a greater predilection for Type IV and II variants, respectively, while the mandibular first premolar showed a greater predilection for Type II canal system. The root canal system of the mandibular second premolar showed maximal diversity (47% Type I, 30% Type II, and 20% Type III). The dimensions were greater in men regardless of tooth type. The most significant relation (p<0.05) between the anatomic size and canal morphology was observed in the maxillary first premolars, followed by the mandibular canines (buccolingual dimension) and the lower second premolars (crown length). Negative correlations existed between the crown length and the patient's age for the anterior teeth and mandibular second premolar (r=-0.2, p<0.01). CONCLUSIONS: The most common canal formation for anterior teeth was the Type I. The anatomic lengths had the strongest influence on the canal configuration of the maxillary first premolar, with Type IV being the most common root canal system. The mandibular second premolars showed maximal diversity in the canal classification terms and had a significant correlation with their crown lengths. CLINICAL RELEVANCE: The complex relationship between the canal morphology and anatomic tooth sizes need meticulous awareness and recognition during endodontic procedures, in conjunction with the demographic variabilities.

Mandibular cortical indices and their relation to gender and age in the cone-beam computed tomography.

OBJECTIVES: The purpose of this study is to evaluate normal ranges of cortical bone Hounsfield units indices through cone beam CT images, and to investigate their relationships with age and sex. METHODS: 700 adult human cone beam CT images were evaluated retrospectively, and divided into 4 age groups. Six different cortical bone Hounsfield unit measurements were applied bilaterally, where gender and age were recorded. Collected data were subjected to statistical analysis and ANOVA tests were used for various comparisons. RESULTS: The cortical bone measurements between female and male patients were significantly different (p<0.05). Cortical bone thickness indices showed greater values in male patients compare to female patients (p<0.05). Quantitative mandibular indices were significantly lower in first age group (18-30 years) than other three older age groups (p<0.01). CONCLUSION: The results of this study seems to propose a persistent alteration in the mandibular cortical bone with age and that this influced by sex. Further studies with larger patient groups are needed to clarify and understand these mandibular indices.

In-depth morphological evaluation of tooth anatomic lengths with root canal configurations using cone beam computed tomography in North American population

Abstract Objective This study aimed to assess the association between tooth size and root canal morphology by using CBCT analysis. Methodology In this retrospective study, tooth anatomic lengths (crown and root lengths, buccolingual and mesiodistal dimensions) of 384 patients were assessed and correlated with Vertucci's root canal morphology classification. Data was analyzed for gender-related differences using the independent sample t-test, ANOVA, and the Pearson's correlation for a possible relation between anatomic lengths and canal morphology. Results The maxillary first and second premolars showed a greater predilection for Type IV and II variants, respectively, while the mandibular first premolar showed a greater predilection for Type II canal system. The root canal system of the mandibular second premolar showed maximal diversity (47% Type I, 30% Type II, and 20% Type III). The dimensions were greater in men regardless of tooth type. The most significant relation (p<0.05) between the anatomic size and canal morphology was observed in the maxillary first premolars, followed by the mandibular canines (buccolingual dimension) and the lower second premolars (crown length). Negative correlations existed between the crown length and the patient's age for the anterior teeth and mandibular second premolar (r=−0.2, p<0.01). Conclusions The most common canal formation for anterior teeth was the Type I. The anatomic lengths had the strongest influence on the canal configuration of the maxillary first premolar, with Type IV being the most common root canal system. The mandibular second premolars showed maximal diversity in the canal classification terms and had a significant correlation with their crown lengths. Clinical Relevance The complex relationship between the canal morphology and anatomic tooth sizes need meticulous awareness and recognition during endodontic procedures, in conjunction with the demographic variabilities.

Porphyromonas gingivalis, Periodontal and Systemic Implications: A Systematic Review.

In recent scientific literature, oral infections and systemic manifestations, or correlations between oral health and systemic diseases are a topic of discussion. Porphyromonas gingivalis is one of the bacteria implicated in the biofilm formation of bacterial plaque, and plays an important role in the progression of periodontal disease. In this systematic review authors have evaluated the literature of the last 10 years on P. gingivalis and all the systemic implications proven. This study therefore evaluates all the districts of the organism in which this bacterium may have implications. From the results it emerges that P. gingivalis has implications in the onset of different systemic pathologies, including rheumatoid arthritis, cardiovascular pathologies, and neurodegenerative pathologies. Surely, understanding the mechanisms of diffusion of this bacterium, it would be possible to prevent a series of pathologies. Thus, putting the dentist clinician at the center of prevention for these diseases.

Morphological Classification of Extraction Sockets and Clinical Decision Tree for Socket Preservation/Augmentation after Tooth Extraction: a Systematic Review.

OBJECTIVES: The aim of present study was to review current literature concerning extraction socket classification immediately following tooth extraction and the rationales for socket preservation/augmentation procedures and with reference to it suggest novel clinical decision tree for extraction socket preservation/augmentation in aesthetic and non-aesthetic area. MATERIAL AND METHODS: The search protocol used the electronic MEDLINE (PubMed) and EMBASE databases for articles published between January 1 2009 and May 1 2019. The search included only human studies published in English. Outcomes were the indications and reasons for socket preservation/augmentation and classification of extraction sockets. RESULTS: Ten studies fulfilled the inclusion criteria and were selected for the study. Although there are various types of extraction socket classifications none of them could completely evaluate all morphological parameters of alveolar ridge. Furthermore, present study revealed that indications for extraction socket preservation/augmentation have wider spectrum than socket morphology and are related to surrounding tissue anatomy or dental implantation operation indications and timing. Based on currently proposed extraction socket classifications and rationales, a novel decision tree for extraction socket preservation/augmentation immediately after tooth extraction in aesthetic and non-aesthetic area was suggested. CONCLUSIONS: The need of extraction socket preservation/augmentation immediately after tooth extraction should be determined by the aesthetic, functional and risk-related viewpoint. A novel clinical decision tree for extraction socket preservation/augmentation immediately after tooth extraction in aesthetic and non-aesthetic zones can be useful tool in socket preservation/augmentation procedures.

The 2nd Baltic Osseointegration Academy and Lithuanian University of Health Sciences Consensus Conference 2019. Summary and Consensus Statements: Group I - Biological Aspects of Tooth Extraction, Socket Healing and Indications for Socket Preservation.

INTRODUCTION: The task of Group I was to review and update the existing data concerning the physiologic process of socket healing, in the absence or presence of grafting materials or platelet concentrates, addressing the associated molecular and cellular events that culminate in the restoration of the lost tissue architecture and functionality. The second task was to review current literature concerning extraction socket classification immediately following tooth extraction and the rationales for socket preservation/augmentation procedures and with reference to it suggest novel clinical decision tree for extraction socket preservation/augmentation in aesthetic and non-aesthetic area. MATERIAL AND METHODS: The main areas indicated by this group were as follows: socket healing process, including haemostasis and coagulation, inflammatory phase, proliferative phase, bone tissue modelling and remodelling; socket healing with graft materials and autologous platelet concentrates; extraction socket classifications; indications and reasons for extraction socket preservation/augmentation. The systematic reviews and/or meta-analyses were registered in PROSPERO, an international prospective register of systematic reviews: http://www.crd.york.ac.uk/PROSPERO/. The literature in the corresponding areas of interest was screened and reported following the PRISMA (Preferred Reporting Item for Systematic Review and Meta-Analysis) Statement: http://www.prisma-statement.org/. Method of preparation of the systematic reviews, based on comprehensive search strategies, was discussed and standardized. The summary of the materials and methods employed by the authors in preparing the systematic reviews and/or meta-analyses is presented in Preface chapter. RESULTS: The results and conclusions of the review process are presented in the respective papers. One theoretical review-analysis and one systematic review were performed. The group's general commentaries, consensus statements, clinical recommendations and implications for research are presented in this article.