ABSTRACT
BACKGROUND: The purpose of this study was to evaluate the initial fixation of a transosseous-equivalent rotator cuff repair and an interlinked medial repair, quantifying the cyclic and failure loading properties of each construct. METHODS: Twenty-four human cadaveric shoulders from 12 matched pairs were dissected, and full-thickness supraspinatus tears were created. In each pair, 1 side was repaired with a transosseous-equivalent repair (control) and the other, with an interlinked repair. All specimens were cycled to 1 MPa of effective stress at 1 Hz for 500 cycles, and gap formation was recorded with a digital video system. All samples were then loaded to failure, and the ultimate load and displacement and modes of failure were recorded. RESULTS: The interlinked repair showed a decrease in the amount of construct gapping after cycle 50 and in peak construct gapping compared with the control group (control, 3.4 ± 0.9 mm; interlinked, 2.5 ± 0.8 mm; P = .048). The interlinked repair also showed a higher ultimate load to failure (control, 318.7 ± 77.9 N; interlinked, 420.6 ± 93.7 N; P = .007). No other significant differences were detected between constructs for preparation or testing metrics. CONCLUSIONS: The interlinked repair, in which 1 continuous suture linked the medial anchors, showed decreased construct gapping and increased ultimate load to failure compared with the control construct. This study establishes the biomechanical validity of the new interlinked repair construct compared with a previously validated construct.
ABSTRACT
BACKGROUND: In the first stage of expander-to-implant breast reconstruction, postoperative expansion is classically initiated at 10 to 14 days (conventional approach). The authors hypothesized that it may be beneficial to wait 6 weeks postoperatively before initiating serial expansion (delayed approach). Clinical and ultrastructural periprosthetic capsule analysis is first required before determining whether a delayed approach ultimately improves capsular tissue adherence and expansion process predictability. METHODS: Patients undergoing two-stage implant-based breast reconstruction were enrolled prospectively in this study. During expander-to-implant exchange, the clinical presence of "Velcro" effect, biofilm, and double capsule was noted. Periprosthetic capsule samples were also sent for scanning electron microscopic observation of three parameters: surface relief, cellularity, and biofilm. Samples were divided into four groups for data analysis (group 1, conventional/Biocell; group 2, delayed/Biocell; group 3, conventional/Siltex; and group 4, delayed/Siltex). RESULTS: Fifty-six breast reconstructions were included. Each group comprised between 13 and 15 breasts. In group 1, no cases exhibited the Velcro effect and there was a 53.8 percent incidence of both biofilm and double capsule. In group 2, all cases demonstrated the Velcro effect and there were no incidences of biofilm or double capsule. Group 3 and group 4 cases did not exhibit a Velcro effect or double-capsule formation; however, biofilm was present in up to 20.0 percent. All group 2 samples revealed more pronounced three-dimensional relief on scanning electron microscopy. CONCLUSIONS: Variations in expansion protocols can lead to observable modifications in periprosthetic capsular architecture. There may be real benefits to delaying expander inflation until 6 weeks postoperatively with Biocell expanders.
