Staple Line Reinforcement During Laparoscopic Sleeve Gastrectomy: Absorbable Monofilament, Barbed Suture, Fibrin Glue, or Nothing? Results of a Prospective Randomized Study.

BACKGROUND: Laparoscopic sleeve gastrectomy (LSG) is associated with serious complications, such as staple line (SL) leaks and bleeding. In order to prevent the occurrence of these complications, surgeons have advocated the need to strengthen the staple line. The aim of this randomized controlled study was to compare the efficacy of three different ways of strengthening of the SL in LSG in preventing surgical post-operative complications. METHODS: Between April 2012 and December 2014, 600 patients (pts) scheduled for LSG were prospectively randomized into groups without SL reinforcement (group A) or with SL reinforcement including fibrin glue coverage (group B), or oversewn SL with imbricating absorbable (Monocryl™; group C) or barbed (V lock®) running suture (group D). Primary endpoints were post-operative leaks, bleeding, and stenosis, while secondary outcomes consisted of the time to perform the staple line reinforcement (SLR) and total operative time. RESULTS: Mean SLR operative time was lower for group B (3.4 ± 1.3 min) compared with that for groups C (26.8 ± 8.5 min) and D (21.1 ± 8.4 min) (p < 0.0001). Mean total operative time was 100.7 ± 16.4 min (group A), 104.4 ± 22.1 min (group B), 126.2 ± 18.9 min (group C), and 124.6 ± 22.8 (group D) (p < 0.0001). Post-operative leaks, bleeding, and stenosis were recorded in 14 pts (2.3 %), 5 pts (0.8 %), and 7 pts (1.1 %), respectively, without statistical difference between the groups. CONCLUSION: Our study suggests that SLR during LSG, with an imbricating or non-imbricating running suture or with fibrin glue, is an unrewarding surgical act with the sole effect of prolonging the operative time.

Gastrobronchial fistula: A rare complication of sleeve gastrectomy.

Gastrobronchial fistula is a rare complication of sleeve gastrectomy. In this case presentation, the diagnosis of gastrobronchial fistula was made by endoscopic contrast injection into the fistulous tract.

A technique for prolonged arterial infusions of fibrinolytic agents in the immediate postoperative period through a cutaneous venostomy.

Prolonged use of fibrinolytic agents post thrombectomy is limited by present techniques that require arterial puncture and indwelling arterial catheters. This limitation can be avoided by attaching a short segment of saphenous vein to the arteriotomy used for the thrombectomy and bringing this out to the skin as a "venostomy"; thus providing ready access to the vascular tree for arteriography, prolonged infusion of thrombolytic agents, or selective catheter placement. In delayed thrombectomies (Categories 2 & 3 as described by the Ad Hoc Committee on Reporting Standards, J Vasc Surg 1986;4:80-94), extending the use of these agents may represent the only hope for limb salvage.

Surgical management of infected PTFE hemodialysis grafts: analysis of a 15-year experience.

The records of 52 consecutive patients who underwent surgical treatment for 57 episodes of hemodialysis graft infection (HGI) from 1977 to 1993 were reviewed to determine the mortality and morbidity associated with this complication and to clarify guidelines for its management. The study group consisted of 35 women and 17 men whose mean age was 57 years at initial graft placement. Thirty-three (58%) HGIs involved straight grafts in the upper arm, 12 (21%) straight forearm grafts, 11 (19%) loop forearm grafts, and 1 (2%) a loop groin fistula. All of these grafts were constructed with polytetrafluoroethylene (PTFE). All 57 cases of HGI showed at least local evidence and 41 (72%) caused systemic symptoms. Thirty-seven (65%) HGIs were associated with positive blood cultures. The predominant infecting organism was Staphylococcus, which was isolated alone or in combination with other organisms from 40 (70%) graft or would sites. Seventy-eight percent (31/40) of the staphylococcal infections involved Staphylococcus aureus. The median time from graft implantation to diagnosis of HGI was 7 months (mean 16 months, range 0 to 77 months) and from diagnosis to surgical treatment, 4 days (mean 6 days, range 0 to 26 days). Initial surgical management consisted of complete excision of all prosthetic material in 43 (75%) cases and partial excision in 14. The 30-day mortality rate following the last operation for the treatment of HGI was 12% (6/52) and was not significantly increased by incomplete excision. Six (86%) of the early deaths were related to sepsis and each of these patients had positive blood cultures.(ABSTRACT TRUNCATED AT 250 WORDS)

Eccentric iliac artery stenosis: a canine model for angioplasty.

A canine model was developed to induce eccentric iliac artery stenosis. Lesions were induced by exposing the medial aspect of the right and left common iliac arteries in four animals to direct argon laser energy (LA). A 2.5-mm diameter side-firing laser probe was used to deliver 10 W of power in 5-s intervals. Twenty-five pulses were delivered over a 5-cm length of artery with an approximate spot size of 0.8 mm2. Selected arteries (n = 2, LA + Ca) were injected in the same laser injury site with calcium chloride (10% solution). Injections were accurately accomplished using an angioscopically guided guidewire/needle device. In all cases, the internal elastic lamina was broken with focal disruptions of the media. At 9 and 14 days, the LA (n = 3) and LA + Ca vessels (n = 1) had minimal stenoses (< 5% area reduction). These vessels contained edematous media with replacement of necrotic smooth muscle by fibrous tissue. At 23 days, the LA (n = 1) and LA + Ca (n = 1) vessels contained 22% and 33% luminal reductions, respectively, with moderate neointimal proliferation and no evidence of calcification. At 56 days the LA vessels (n = 2) contained 30 and 42% luminal area stenoses with marked neointimal hyperplasia. This preliminary data suggests that controlled arterial wall injury with LA irradiation can induce eccentric fibrointimal lesions in a canine model.

Laser-fused biologic vascular graft anastomoses.

Tissue fusion using laser energy is a promising new technology that may improve the healing of anastomoses. This study evaluated the feasibility of using argon laser energy to fuse vascular tissue and biologic vascular prostheses (St. Jude Medical, Inc.) in a canine arteriovenous (A-V) fistula model. Five animals had 4-cm length, 3-mm internal diameter grafts (n; eq 10) placed bilaterally as side-to-side A-V interpositions from the femoral artery to femoral vein. One A-V graft was placed using argon laser energy with the vessel edges aligned by 6-0 polypropylene traction sutures at 3 to 4 mm intervals. The contralateral graft was sutured using running 6-0 polypropylene suture. Anastomoses were successfully fashioned in all animals except for episodes of delayed bleeding at two laser-fused segments (15 min and 2 hrs) and one segment in a suture control (6 days). The implants were removed to evaluate the integrity and healing of the anastomoses at 2 hrs, 8 days, and at 7, 9, and 11 weeks. In all instances, there was no evidence of anastomotic dehissance or enlargement. Histologic examination of the anastomoses revealed coapted vessel and prosthetic edges in laser-fused specimens and a limited foreign-body response to the permanent sutures in the suture controls. In the longer term specimens there was marked intimal proliferation at the venous anastomosis in all implants, with recent bilateral occlusions of the 7 and 11 week implants at the venous connection. We conclude that laser fusion of biologic vascular prostheses to autogenous vessel is possible with healing and no evidence of anastomotic dehissance.(ABSTRACT TRUNCATED AT 250 WORDS)

Argon laser-welded bovine heterograft anastomoses.

UNLABELLED: This study evaluated the strength of laser-welded arteriovenous shunts established using St. Jude BioPolyMeric vascular grafts. The arterial anastomoses of the biological graft were laser welded with and without the addition of soluble collagen or fibrin sealant. In four dogs, 16 arteriovenous grafts were implanted between the femoral artery and vein or the carotid artery and jugular vein using a 6 cm long, 4 mm internal diameter prosthesis. The 16 arterial anastomoses were evenly divided into four groups: sutured control, laser welded (LW), LW with soluble collagen applied immediately before and during welding, and LW with fibrin sealant applied after welding. All arterial control and venous anastomoses were sutured using continuous 6-0 polypropylene suture. All LW anastomoses were initially divided into six 5 mm long segments using six evenly spaced 6-0 polypropylene stay sutures. Each segment was laser welded using 15 to 18 5-sec pulses of the 0.5 W (7.5 W/cm 2) argon laser energy delivered via a 300 mum fiber while cooling the tissue with slow-drip saline irrigation. Blood flow was established and maintained through each anastomosis for 1 h. The vessels were then controlled, and anastomotic bursting pressure was determined with infusion of heparinized blood. RESULTS: An additional hemostatic suture was required in 3 LW anastomoses (2 LW, 1 LW with collagen). Mean bursting pressures (mm Hg) of the arterial anastomoses were as follows: sutured controls 165 +/- 159, LW 144 +/- 58, LW and collagen 93 +/- 47, LW and fibrin sealant 181 +/- 45.(ABSTRACT TRUNCATED AT 250 WORDS)

A canine iliac artery occlusion model.

This report describes an occlusive canine iliac artery model for use in experimental angioplasty procedures. Lesions were induced by overdistending and breaking the internal elastic lamina of the artery and implanting a 2-cm long occlusive collagen plug. The collagen plug diameter was varied to fit the iliac artery and caused immediate bilateral iliac occlusions. Histology of the lesions at 9 and 14 days (n = 2) showed that the lumen was filled with a mixture of fresh thrombus and collagen pad material (more collagen than thrombus) with focal disruptions of the internal elastic lamina. At 36 days (n = 2) the lumen was obliterated with a mixture of organizing thrombus and collagen pad material (more organizing thrombus than collagen). At 60 (n = 4) and 80 (n = 8) days the collagen pad had been completely replaced with organizing thrombus consisting of collagen fibers and hemosiderin-laden macrophages with persistent focal disruptions of the internal elastic lamina. These initial data demonstrate the ability to create fibrotic arterial occlusions in as short a time as 60 days and to provide a practical model to study methods for treating localized peripheral vascular occlusive disease.

Three-dimensional intravascular ultrasound imaging of normal and diseased canine and human arteries.

This study reports three-dimensional reconstruction of two-dimensional intravascular ultrasound images obtained along 5 cm vessel segments. Each three-dimensional image was produced by computerized "stacking" of a set of consecutive two-dimensional images (mode 90 images per set; range 32 to 256). Three-dimensional images (n = 26) were obtained from 11 human normal and atherosclerotic arteries (three in vitro and eight in vivo) and five in vivo canine studies. In vivo human examinations included three iliac, one deep, and three superficial femoral arteries and one aortic dissection. Five in vivo canine vessels (three iliac stenoses and two aortic dissections) were imaged before and after intraluminal stent deployment. Images were displayed on a gray-scale monitor, allowing examination of vessel images as complete cylinders or longitudinal hemisections in any user-defined plane. This enabled global examination of vascular segments and identified luminal shape, wall thickness, and distribution and morphology of plaques. Reconstructions of aortic dissections illustrated the extent of the dissection and produced an anatomic picture of the false lumen. Three-dimensional imaging enhanced stent deployment by identifying the site for deployment, dimensions of the vessel lumen, and changes in morphology after stent insertion. There was good correlation in vessel dimensions measured by angiography, two-dimensional intravascular ultrasonography and longitudinal gray-scale reconstructions (r = 0.74 to 0.95; p = 0.34 to 0.001) but poor correlation with measurements from three-dimensional surface-rendered images (r = 0.13 to 0.48; p = 0.42 to 0.87). We conclude that three-dimensional intravascular ultrasound imaging is an innovative new method for identifying the type, extent, and spatial configuration of arterial disease, with promising diagnostic and therapeutic applications.

Intravascular ultrasonography.

Intravascular ultrasonography is developing rapidly as a method for defining the transmural anatomy of vascular structures, with diagnostic and therapeutic applications. The ultrasound technology not only has unique diagnostic capabilities by defining the distribution and character of lesions, but also provides accurate control information regarding efficacy of angioplasty methods. An exciting recent development is the three-dimensional reconstruction of two-dimensional images which permits global examination of luminal and transmural vessel morphology. This technology may enable improved guidance of intraluminal devices to enhance lesion removal without damaging adjacent normal wall structure and appropriate device selection by differentiating specific plaque characteristics.

Sequential intraluminal ultrasound evaluation of balloon angioplasty of an iliac artery lesion.

This report describes intravascular ultrasound imaging of a localized 81% stenosis in the left common iliac artery of a 52-year-old woman. The lesion was dilated using an 8 mm balloon and was imaged pre- and post-dilation using arteriography and a 5F, 30 Mhz intravascular ultrasound catheter. The same site was imaged again intraoperatively at two months following the initial procedure using an 8F, 20 Mhz intravascular ultrasound catheter when the patient had a femoropopliteal bypass for continuing ischemia. Intravascular ultrasound imaging allowed accurate, sequential, on-line calculation of the cross-sectional area and volume of the lesion both, acutely and following healing of the site. The morphology of the fractured arterial plaque was clearly defined, demonstrating distribution of calcification, and intraluminal flaps not apparent on arteriography. The case demonstrates the unique potential of intravascular ultrasound in assessing the immediate effect of interventions and evaluating the long-term healing.

Intravascular ultrasound guided holmium:YAG laser recanalization of occluded arteries.

Current angioplasty devices are limited by arterial wall dissection and perforation, and by early recurrence from inadequate debulking of lesions. This study evaluated intravascular ultrasound (IVUS) as guidance for concentric laser recanalization of arterial occlusions. Twelve, 2-4-cm-long canine iliac artery occlusions were treated at 2 weeks (organizing thrombus) to 12 weeks (firm fibrous lesions) using a Holmium:YAG laser (2,100 nm wavelength) in free running mode, FRM, (250 musec pulse, 5 Hz), n = 9; and Q-switched mode, QSM (200 ns pulse, 6 Hz), n = 3. A 200 microns (n = 2) or 600 microns (n = 10) optic fiber was centered in the artery coaxial to a 5Fr rotating A scan IVUS probe. The fiber was positioned in the center of the artery distal to the lesion and slowly advanced through the obstruction. In 8 occlusions the same fiber was used as a guidewire for passage of either a 1.6-mm-(n = 2) and/or 3.0-mm (n = 6) diameter multifiber catheter (19 x 100 and 19 x 200 microns fibers, respectively) using FRM energy to further debulk the lesion. In all cases, IVUS guidance enabled concentric initial recanalization of occlusions, although 3 vessel perforations resulted from fiber deviation off the center of the lumen at a distance of 2 to 4 cm from the IVUS imaging element. Both QSM and FRM modes ablated tissue, with FRM modes producing more tissue fragmentation and thermal effect. IVUS images accurately diagnosed the location of lesions compared to angioscopic views and pathologic analysis of the specimens.(ABSTRACT TRUNCATED AT 250 WORDS)

Holmium:YAG laser ablation of human intervertebral disc: preliminary evaluation.

Percutaneous discetomy has become a viable alternative in the treatment of herniated intervertebral disc. This study determined the effectiveness of holmium: YAG laser for ablation of human disc tissue. Human cadaveric intervertebral disc was harvested and stored in cold saline-soaked gauze for evaluation within 24 hr of removal. Using a specially designed apparatus, a 600 microns diameter fiber was advanced perpendicular through the annulus fibrosis at a controlled force of 0.098 Newtons (10 g). Samples were lased in air (n = 17) and in room temperature saline (n = 32). The laser energy was delivered at 5 Hz, 250 microseconds pulsewidth, and from 50 mJ/mm2 to 1,100 mJ/mm2 fluence. Three to six holes were lased using identical parameters in each tissue specimen and were evaluated histologically and by morphometric analysis. The maximum zone of thermal necrosis and thermal denaturation occurred at 700-1,100 mJ/mm2; 140 microns and 590 microns in air and 80 microns and 730 microns in saline, respectively. At fluences between 200 and 700 mJ/mm2, the thermal necrosis ranged from 20 to 60 microns in air and from 10 to 50 microns in saline, the zone of denaturation also being less. The holes created with the 600 microns fiber were circular in shape, with a mean diameter of 500 microns (n = 3). The etch rates (penetration/pulse) appeared to increase with increasing fluences. In saline, the etch rate ranged from 7 to 53 microns/pulse (r = 0.57, P less than or equal to 0.10), and, in air, the values ranged from 7 to 65 microns/pulse (r = 0.79, P less than or equal to 0.03).(ABSTRACT TRUNCATED AT 250 WORDS)

Three dimensional vascular ultrasound imaging.

Intravascular ultrasound (IVUS) is a new catheter-based system that produces two-dimensional (2D) images of vascular structures. Existing systems produce real-time, cross-sectional "slices" of vessels using 5.0 French (Fr) (30 MHz) and 8.0 Fr (20 MHz) IVUS catheters containing ultrasound transducers at the tip. Computerized, three-dimensional (3D) reconstruction of these 2D images using a personal computer- (PC) based image analysis system is described. A set (n = 90) of longitudinally aligned, consecutive images is sampled from a 5.0 cm vessel segment, and computerized processing creates rendered 3D images. By adjusting image density threshold and viewing angle, the morphology, location, and spatial distribution of arterial pathology can be seen. Refinements in computer hardware and software have reduced processing time and improved image resolution to the point where 3D IVUS imaging is a clinically applicable tool. Possible applications include diagnosis of complex arterial pathology, guidance of intraluminal instruments, and assessment of the effects of endovascular interventions.

A new technique for intraluminal hollow organ imaging: three-dimensional ultrasound.

Intraluminal ultrasound (ILUS) is a new catheter-based system which produces two-dimensional (2D), cross-sectional images of tubular structures. The principle of image acquisition using 5.0 Fr (30 MHz) and 8.0 Fr (20 MHz) ILUS catheters containing ultrasound transducers at the tip, is equally applicable to all tubular or hollow organs. This article illustrates the feasibility of intraluminal imaging of hollow organ structures, and describes computerized three-dimensional (3D) reconstruction of the 2D images, using a PC-based image analysis system. A set (n = 90) of longitudinally aligned, consecutive 2D images was sampled from various organs (canine bladder, urethra, jejunum, esophagus, and trachea) and computer processed to produce 3D images. By adjusting image density threshold and viewing angle, the lumen and wall morphology can be examined in any projection. Possible applications include diagnosis of lumen encroaching pathology, guidance of intraluminal instruments, and assessment of the effects of endoluminal interventions.