Total femur fixation using the "nail-plate docking technique" for ipsilateral femur shaft fracture.

In an aging society, the number of femoral fractures is increasing, as well as the incidence of periprosthetic fractures. These secondary fractures are often difficult to fixate stably because of the osteoporotic bone and the existence of the former implant. Herein, we present two cases of secondary femoral shaft fractures after osteosyntheses for distal femur fractures with polyaxial locking plates (Non-Contact-Bridging Distal Femur, NCB-DF®, ZimmerBIOMET, Winterthur, Switzerland). Antegrade intramedullary nails (Natural Nail®-GT Femoral, ZimmerBIOMET, Winterthur, Switzerland) were utilized without removal of the NCB-DFs. In these osteosyntheses, proximal locking screws of NCB-DFs were inserted and locked into the distal inter-locking holes of Natural Nails. This "nail-plate docking technique" could allow for more stable fixation of the whole femur with minimally invasive surgical intervention while preserving the existing implant. Although there are a few surgical technical knacks and pitfalls in inserting the screw, further fractures of the femur could also be prevented with this technique.

Bilateral atypical femoral fractures treated with compression hip screw and intramedullary nail fixation.

Atypical femoral fractures (AFF) are more difficult to treat than typical femoral fractures; they require strong fixation and good reduction. Intramedullary (IM) nailing is the first option for the treatment of complete AFF; however, there are few reports comparing IM nailing and extramedullary fixation. Moreover, there are no reports on the outcomes of bilateral atypical subtrochanteric femoral fractures treated with an IM nail on one side and a compression hip screw (CHS) on the other. We report the case of a 69-year-old woman who had been on risedronate sodium once a month since she was 58 years old. She reportedly felt pain in both her thighs due to an undiagnosed cause. Six months later, she fell and was diagnosed with bilateral complete atypical femoral subtrochanteric fractures (right side: Seinsheimer type IIC; left side: Seinsheimer type IIA). Four days later, she underwent CHS on the right side and IM nailing after open reduction surgery on the left. The reduction was successful. The left side healed 6 months after surgery, but the right side healed only after 14 months, despite assistance with low-intensity pulsed ultrasound. In atypical femoral subtrochanteric fractures, good reduction is important for healing, but, in this case, the CHS side healed slowly despite achievement of good reduction because of the difference in the fixation force between IM nailing and CHS, in addition to a probable occurrence of severely suppressed bone turnover (SSBT). Furthermore, reaming was not done on the CHS side, which may have contributed to the delay in bony union. IM nailing is the first option for atypical femoral subtrochanteric fractures because of faster union and lower reoperation rate than extramedullary fixation. Based on our findings, we recommend IM nailing as the first option for atypical femoral subtrochanteric fractures when good reduction can be achieved.

Delayed hematoma in gluteus medius caused by Gamma nail protrusion over the greater trochanter.

Aside from cases of mechanical complications or infection short femoral nails (SFNs) are not removed after open reduction and internal fixation (ORIF) because femoral trochanteric fractures often occur in older osteoporotic females. Occasionally, SFN removal is performed because of severe chronic hip and thigh pain after surgery. However, cases of large hematoma formation in the gluteus medius with associated severe pain have not been reported in patients after ORIF. A 58-year-old healthy woman fell and incurred a femoral trochanteric fracture at work. ORIF was performed using Gamma nail for the fracture, which was classified as AO31-1.2 according to the AO Foundation/Orthopaedic Trauma Association (AO/OTA) classification. The bone healed sufficiently. The patient reported chronic hip and thigh pain after ORIF, but the SFN was not removed because of concerns about further fractures. After 1 year and 8 months, she suddenly experienced severe hip and thigh pain with hip swelling, but without prior trauma. Magnetic resonance imaging (MRI) showed a large hematoma in the gluteus medius near the greater trochanter. Under general anesthesia, SFN removal was performed because of the persistent pain. After SFN removal, the chronic pain resolved without any complications, such as a femoral neck fracture. In this case, chronic hip and thigh pain and delayed hematoma may have been caused by SFN protrusion over the greater trochanter, damaging soft tissues around the gluteus medius. Thus, soft tissue injury and hematoma are possible in patients with chronic hip and thigh pain after ORIF using SFN. In using SFN for femoral trochanteric fractures, it is important to prevent protrusion of SFN over the greater trochanter. Further careful follow-up with MRI and/or ultrasonography is needed to study delayed hematoma after ORIF using SFN.

Rapid Destructive Arthropathy of the Knee in Parkinson's Disease with Pisa Syndrome: A Case of Knee-Spine Syndrome.

The changes occurring in knee osteoarthritis often cause alterations in the spinal loading condition, which further lead to degenerative changes. This close relationship of the knee and spine has been reported as knee-spine syndrome. A 60-year-old woman with Parkinson's disease (PD; Hoehn-Yahr stage IV) had severe knee pain with moderate lateral osteoarthritis of the knee (Kellgren-Lawrence classification grade II). Conservative therapy had no effect at all, and the knee developed destructive osteoarthritis rapidly without any traumatic episodes. The radiographic findings progressed to Kellgren-Lawrence grade IV within a month. Magnetic resonance imaging revealed partial depression of the joint surface, including shredded ossicles and substantial amounts of synovial fluid. The imaging findings were considered to be caused by a subchondral insufficiency fracture (SIF). Total knee arthroplasty was performed using a semiconstrained prosthesis. The alignment of her lower extremity improved, and the patient could walk without knee pain. The patient had Pisa syndrome, a lateral flexion of the trunk, which is a postural deformity of the trunk secondary to long-standing PD. The postural deformity in PD is not based on spinal deformity itself but on the loss of postural reflexes and the imbalance of muscle tonus. Her left knee pain appeared 1 month after L1-L4 posterior lumbar interbody fusion (PLIF) as the Pisa syndrome to her left side worsened. The more the trunk tilts to the lateral side, the center of the gravity axis will shift and pass through more lateral points of the knee and result in higher knee load. The stress concentration from the spine to the lateral joint of the knee caused lateral knee osteoarthritis, namely, knee-spine syndrome. When patients undergo correction surgery for adult spinal disorder with impairment of postural reflexes, they need to be followed up carefully regarding not only the spinal alignment but also the lower extremities.

Comparing the usefulness of a fluoroscopic navigation system in femoral trochanteric fracture for orthopaedic residents with the conventional method.

INTRODUCTION: Lag screw insertion into the ideal position is essential to obtain good results in open reduction and internal fixation for femoral trochanteric fracture. Tip-apex distance (TAD) is a widely adopted method for evaluating the risk of lag screw cut-out. Adaptive positioning technology (ADAPT) is a fluoroscopic computer-assisted surgery system that enables orthopaedic surgeons to guide the screw into a proper position intraoperatively. A randomized control study concluded that ADAPT resulted in excellent TAD. However, it was not significantly better than conventional methods when performed by fellowship-trained traumatologists. Therefore, we hypothesised that ADAPT would be useful to orthopaedic residents and evaluated this usefulness. METHODS: We reviewed 102 patients who underwent open reduction and internal fixation for femoral trochanteric fracture from May 2017 to March 2019 using Gamma-3 intertrochanteric nails. Two residents performed all procedures; 51 patients underwent surgery using ADAPT and the others underwent surgery without navigation. The number of attempts to drill guide-wire, operation time, lag screw insertion time, radiation exposure time, TAD, and lag screw position were evaluated for each surgeon. RESULTS: In one resident, when using the ADAPT system, the number of attempts to drill guide-wire (p=0.001), lag screw insertion time (p=0.000), radiational exposure time (p=0.009) and TAD (p=0.007) were lower, and the percentage of ideal lag screw position (p=0.035) were better than that in the conventional method. However, there was no significant difference in the performance of another resident with respect to the aforementioned factors, whether using ADAPT or not. CONCLUSION: One resident showed better results with the ADAPT system than with conventional osteosynthesis. However, another resident received no benefit from ADAPT. The efficiency may not apply to everyone as individual competence can influence efficiency when using ADAPT system. Therefore, as a new device, it must be used cautiously because skill or experience may influence its use, especially by orthopaedic residents.

Analysis of a Cementless Femoral Stem Neck Fracture Using Scanning Electron Microscopy and the Finite Element Method.

Implant fracture is one of the rarest complications of total hip arthroplasty (THA). A 57-year-old woman experienced a fracture of the femoral stem (AHFIX Q, KYOCERA, Japan) about five years after THA. We examined the broken stem by digital microscopy, scanning electron microscopy, and finite element method. The anterolateral corner of the stem's neck was found to be the origin point of the fracture. Finite element method analysis revealed that the stress concentration was highest in the corner of the hollow for apparatus attachment. The stem's design has been considered one of the risk factors for stem fracture. In this patient, multiple risk factors, including thin stem (the smallest size, NAR #1), use of the long neck (+3 mm), obesity (body mass index: 27.3), and adjacent osteoarthritis (contralateral THA loosening and knee osteoarthritis), were present. To our knowledge, this is the first reported case of an AHFIX Q stem fracture. Surgeons must keep in mind that fracture of the femoral stem in patients with several risk factors is possible even several years after THA.

Accuracy analysis of computer-assisted surgery for femoral trochanteric fracture using a fluoroscopic navigation system: Stryker ADAPT® system.

PURPOSE: ADAPT is a fluoroscopic computer-assisted surgery system which intraoperatively shows the distance from the tip of the screw to the surface of the femoral head, tip-to-head-surface distance (TSD), and the tip-apex distance (TAD) advocated by Baumgaertner et al. The study evaluated the accuracy of ADAPT. PATIENTS AND METHODS: A total of 55 patients operated with ADAPT between August 2016 and March 2017 were included as subjects. TSD and TAD were measured postoperatively using computed tomography (CT) and X-rays. The intraclass correlation coefficient (ICC) was checked in advance. The error was defined as the difference between postoperative and intraoperative measurement values of ADAPT. Summary statistics, root mean square errors (RMSEs), and correlations were evaluated. RESULTS: ICC was 0.94 [95% CI: 0.90-0.96] in TSD and 0.99 [95% CI: 0.98-0.99] in TAD. The error was -0.35 mm (-1.83 mm to 1.12 mm) in TSD and +0.63 mm (-5.65 mm to 4.59 mm) in TAD. RMSE was 0.63 mm in TSD and 1.53 mm in TAD. Pearson's correlation coefficient was 0.79 [95% CI: 0.66-0.87] in TSD and 0.83 [95% CI: 0.72-0.89] in TAD. There were no adverse events with ADAPT use. CONCLUSION: ADAPT is highly accurate and useful in guiding surgeons in properly positioning the screws.

Ipsilateral stress fracture of the proximal fibula after total knee arthroplasty in a patient with severe valgus knee deformity on a background of Rheumatoid arthritis.

INTRODUCTION: Previous studies have reported a lower extremity stress fracture after total knee arthroplasty (TKA). However, a fibular fracture after TKA is quite rare. We report a case of proximal fibula fracture after TKA in a patient with rheumatoid arthritis (RA). PRESENTATION OF CASE: A 45 year old woman with RA had severe knee and foot pain with an antalgic gait disturbance. There was a significant joint deformity in many of lower limb joints. Interval bilateral TKAs were performed two weeks apart. Right TKA was performed using a constraint-type prosthesis, through lateral parapatellar approach. Left TKA was performed using a posterior-stabilized (PS) prosthesis through the more commonly employed, medial parapatellar approach. Seven weeks after the right TKA, the patient was found to have an atraumatic proximal fibular fracture. The fracture went on to heal conservatively. DISCUSSION: The fracture was considered to have occurred after the TKA. The callus appeared eleven weeks after the TKA. The factors that contributed to the fracture were thought to be overload of the fragile bone secondarily to disuse osteopaenia, RA or potentially the significant valgus malalignment correction. The surgical approach, the implant or implantation or the persisting joint deformity, were thought to be contributing factors to the aetiology of the stress fracture. The resultant change in clinical outcome/course is outlined in this case report. CONCLUSION: A stress fracture of the proximal fibula has the potential in the aetiology of may cause other stress fractures, joint other instability, and/or malalignment of the total lower extremity.

Novel cemented cup-holding technique while performing total hip arthroplasty with navigation system.

Recently, navigation systems have been more widely utilized in total hip arthroplasty. However, almost all of these systems have been developed for cementless cups. In the case of cemented total hip arthroplasty using a navigation system, a special-ordered cemented holder is needed. We propose a novel cemented cup-holding technique for navigation systems using readily available articles. We combine a cementless cup holder with an inverted cementless trial cup. The resulting apparatus is used as a cemented cup holder. The upside-down cup-holding technique is useful and permits cemented cup users to utilize a navigation system for placement of the acetabular component.

Oblique Axis Body Fracture: An Unstable Subtype of Anderson Type III Odontoid Fractures-Apropos of Two Cases.

Purpose. Anderson type III odontoid fractures have traditionally been considered stable and treated conservatively. However, unstable cases with unfavorable results following conservative treatment have been reported. Methods. We present the cases of two patients who sustained minimally displaced Anderson type III fractures with a characteristic fracture pattern that we refer to as "oblique type axis body fracture." Results. The female patients aged 90 and 72 years, respectively, were both diagnosed with minimally displaced Anderson type III fractures. Both fractures had a characteristic "oblique type" fracture pattern. The first patient was treated conservatively with cervical spine immobilization in a semirigid collar. However, gross displacement was noted at the 6-week follow-up visit. The second patient was therefore treated operatively by C1-C3/4 posterior fusion and the course was uneventful. Conclusions. Oblique type axis body fractures resemble a highly unstable subtype of Anderson type III fractures with the potential of severe secondary deformity following conservative treatment, irrespective of initial grade of displacement. The authors therefore warrant a high index of suspicion for this injury and suggest early operative stabilization.

Charcot Fracture in the Calcaneus after Total Knee Arthroplasty: A Case Report.

INTRODUCTION: Only a few reports have described calcaneus fractures after total knee arthroplasty (TKA). Therefore, in this report, we describe a case of calcaneal avulsion fracture that occurred 5 weeks after a TKA in a relatively young male patient with syphilis. CASE REPORT: A 63-year-old man with syphilis had Charcot joint of the right knee. The patient developed severe varus deformity and contracture and experienced severe pain in the knee. TKA was performed to alleviate the pain and improve the patient's gait. The patient noticed slight heel pain 4 weeks after the TKA, and a calcaneus avulsion fracture in the ipsilateral foot was diagnosed without any trauma 1 week later. Open reduction internal fixation was performed with cannulated cancellous screws and a cerclage wire. 3 weeks after the surgery, partial weight bearing was permitted in an orthotic device. Full weight-bearing was allowed at 7 weeks after surgery. The surgical wounds healed without complications. The calcaneus fracture successfully achieved bone union with appropriate surgical intervention and aftercare. CONCLUSION: The previous studies have shown that calcaneus stress fracture may occur in elderly osteoporotic women after TKA. Patients with peripheral neuropathy may develop a Charcot fracture after minimal trauma because of decreased protective sensation, even if the patient is a relatively young man without osteoporosis. Charcot joint disease is also considered to be a risk factor for calcaneal stress fracture and Charcot fracture after TKA.

Bilateral Calcaneal Avulsion Fracture Complicated with a Delayed Achilles Tendon Rupture in a Patient with Diabetes: A Case Report.

CASE: A sixty-five-year-old man with diabetes mellitus had bilateral calcaneal avulsion fracture without a history of trauma. Both fractures were treated surgically with modified tension-band wiring, cerclage wiring, and screws. Six months after the surgery on the left side, the patient had a left Achilles tendon rupture proximal to its insertion into the calcaneus. CONCLUSION: Calcaneal avulsion fractures are rare but often have complications. Even if these fractures are managed by well-established treatment methods, an unanticipated complication, namely a delayed Achilles tendon rupture, can occur in patients with diabetes.

Improved and large area single-walled carbon nanotube forest growth by controlling the gas flow direction.

A gas shower system was introduced to improve the growth of single-walled carbon nanotube (SWNT) forests by controlling the gas flow direction. Delivery of gases from the top of the forest enabled direct and precise supply of ethylene and water vapor to the Fe catalysts. As such, this approach solved one of the limiting factors of water-assisted chemical vapor deposition method (CVD), that is, delivery of the very small optimum water level to the catalysts. Consequently, this approach improved SWNT forests growth stability, uniformity, reproducibility, carbon efficiency (32%), and catalyst lifetime. With this improved growth, we could synthesize a 1 cm tall forest with 1 x 1 cm size. Also we employed this approach to grow an A4 size SWNT forest to highlight the scalability of water-assisted CVD.