ABSTRACT
The postal dose audit using radio-photoluminescence glass dosimeters was begun in November 2007 in order to improve the quality of radiotherapy in Japan. However, the irradiation conditions are now limited to the reference conditions which are 10×10 cm(2) field and 10 cm depth. The application of the glass dosimeters to non-reference conditions is strongly desired. This study dealt with the field-size dependence of the glass dosimeter outputs in the 6 MV photon beams of a medical linear accelerator (Varian Clinac21EX). We irradiated glass dosimeters with square field sizes of 5, 7, 10, 13, 16, 20, 23 and 25 cm side lengths at the 10 cm depth of the water equivalent phantom (SSD=90 cm). The outputs were compared with ionization chamber outputs. The ratio of the glass dosimeter outputs to the absorbed dose to water obtained with the ionization chamber increased approximately 1.5% between 5×5 cm(2) and 25×25 cm(2). We have to consider this field-size dependence when we apply the glass dosimeters to non-reference conditions.
Subject(s)
Photons , Radiometry , Humans , Particle Accelerators , Phantoms, Imaging , Radiotherapy DosageABSTRACT
A Japanese code of practice for clinical dosimetry, titled "Standard Dosimetry of Absorbed Dose in External Beam Radiotherapy" was published by the Japan Society of Medical Physics (JSMP) in 2002. It mostly followed IAEA Technical Reports Series No. 398, which was based on N(D,w), i.e., the calibration factor in terms of absorbed dose to water for a dosimeter. The Japanese primary standard dosimetry laboratory, however, has not supplied N(D,w) but N(X), as the calibration factor in terms of exposure. The unique feature of the Japanese code was provision of a data table of calculated conversion factors, N(D,w) / N(X) values, for many types of ionization chambers, excluding new plane-parallel ionization chambers. This paper describes the experimental evaluation of the conversion factors for the new plane-parallel ionization chambers, such as the Roos-type and Advanced Markus chambers. The obtained N(D,w) / N(X) values for PTW 34001, Wellhöfer PPC 40 and PTW 34045 were 37.96 +/- 0.19, 37.85 +/- 0.36 and 37.90 +/- 0.26 (Gy/C kg(-1)), respectively. They agreed with estimations based on Monte Carlo calculations.
