Identification and formation mechanism of individual degradation products in lithium-ion batteries studied by liquid chromatography/electrospray ionization mass spectrometry and atmospheric solid analysis probe mass spectrometry.

RATIONALE: Improvement of lithium ion batteries (LIBs) in terms of performance and robustness requires good understanding of the reaction processes. The analysis of the individual degradation products in LIB electrolytes and on the surface of the electrodes provides vital information in this regard. In this study, mass spectrometric analytical methods were utilized for the identification of the individual degradation products. METHODS: The degradation products in the electrolytes recovered from cycle-tested cells were separated by liquid chromatography (LC) and their mass spectrometric analysis was conducted by electrospray ionization mass spectrometry (ESI-MS). For identification of degradation products on the surface of electrodes, atmospheric solid analysis probe (ASAP)-MS analysis was conducted by time-of-flight mass spectrometry with an ASAP probe and an atmospheric pressure chemical ionization source. RESULTS: The degradation products in the electrolytes, namely carbonate oligomers and organophosphates, were identified simultaneously by LC/ESI-MS. Their formation mechanisms were estimated, which explain their different compositions at different temperatures. One degradation product was found on the anode surface by ASAP-MS, and its formation mechanism was explained similarly to those in the electrolyte. CONCLUSIONS: The results suggest that the electrolyte degradation is correlated with the formation of a solid electrolyte interphase, which is an important factor in the performance of LIBs. We expect that further investigation of the degradation products by LC/ESI-MS and ASAP-MS will be helpful for studying their degradation processes in LIBs. Copyright © 2016 John Wiley & Sons, Ltd.

Correction: Effects of p-substituents on electrochemical CO oxidation by Rh porphyrin-based catalysts.

Correction for 'Effects of p-substituents on electrochemical CO oxidation by Rh porphyrin-based catalysts' by Shin-ichi Yamazaki et al., Phys. Chem. Chem. Phys., 2010, 12, 8968-8976.

Rapid determination of 4-aminobutyric acid and L-glutamic acid in biological decarboxylation process by capillary electrophoresis-mass spectrometry.

4-Aminobutylic acid (GABA) is a monomer of plastic polyamide 4. Bio-based polyamide 4 can be produced by using GABA obtained from biomass. The production of L-glutamic acid (Glu) from biomass has been established. GABA is produced by decarboxylation of Glu in biological process. High-performance liquid chromatography (HPLC) with derivatization is generally used to determine the concentration of GABA and Glu in reacted solution samples for the efficient production of GABA. In this study, we have investigated the rapid determination of GABA and Glu by capillary electrophoresis-mass spectrometry (CE-MS) without derivatization. The determination was achieved with the use of a shortened capillary, a new internal standard for GABA, and optimization of sheath liquid composition. Determined concentrations of GABA and Glu by CE-MS were compared with those by pre-column derivatization HPLC with phenylisothiocyanate. The determined values by CE-MS were close to those by HPLC with pre-column derivatization. These results suggest that the determination of GABA and Glu in reacted solution is rapid and simplified by the use of CE-MS.

Electrospray ionization mass spectrometric analyses of rhodium tetraphenylporphyrin complexes as electrocatalysts for CO oxidation by tandem mass spectrometry and hyphenated method with capillary electrophoresis.

Carbon monoxide (CO) poisoning of platinum (Pt)-based electrocatalysts is a huge obstacle in the development of proton-exchange membrane fuel cells. Fuel cell performance can be improved by removing CO through electrolytic oxidation. Yamazaki et al. synthesized several rhodium (Rh) tetraphenylporphyrin complexes as electrocatalysts to reduce CO poisoning. Experimental results showed that these complexes display higher electrochemical CO oxidation activity than previously synthesized Rh octaethylporphyrin complex and that the differences in the structures of p-substituted groups influence their activity. To confirm the formation of these Rh tetraphenylporphyrin complexes, analyses were performed using electrospray ionization mass spectrometry (ESI-MS), electrospray ionization tandem mass spectrometry (ESI-MS/MS), and capillary electrophoresis-electrospray ionization mass spectrometry (CE-ESI-MS). In ESI-MS, peaks other than that of the Rh tetraphenylporphyrin complex were occasionally detected at different m/z values. The ESI-MS/MS and CE-ESI-MS results suggest that these peaks correspond to the complexes coordinating CO or other ions, or to remaining uncoordinated tetraphenylporphyrins. Coordination of CO is supported by the ESI-MS/MS results for the Rh octaethylporphyrin complex. Separation of the uncoordinated tetraphenylporphyrin from Rh tetraphenylporphyrin complex was achieved by CE-ESI-MS.

Effects of p-substituents on electrochemical CO oxidation by Rh porphyrin-based catalysts.

Electrochemical CO oxidation by several carbon-supported rhodium tetraphenylporphyrins with systematically varied meso-substituents was investigated. A quantitative analysis revealed that the p-substituents on the meso-phenyl groups significantly affected CO oxidation activity. The electrocatalytic reaction was characterized in detail based on the spectroscopic and X-ray structural results as well as electrochemical analyses. The difference in the activity among Rh porphyrins is discussed in terms of the properties of p-substituents along with a proposed reaction mechanism. Rhodium tetrakis(4-carboxyphenyl)porphyrin (Rh(TCPP)), which exhibited the highest activity among the porphyrins tested, oxidized CO at a high rate at much lower potentials (<0.1 V vs. a reversible hydrogen electrode, at 60 degrees C) than the present PtRu catalysts. This means that CO is electrochemically oxidized by this catalyst when a slight overpotential is applied during the operation of a proton exchange membrane fuel cell. This catalyst exhibited little H(2) oxidation activity, in contrast to Pt-based catalysts.

Electrochemical oxidation of sugars at moderate potentials catalyzed by Rh porphyrins.

In this communication, we demonstrate that certain kinds of Rh porphyrins on carbon black can electrochemically oxidize aldose at low potentials. The onset potential was much lower than those with the other complex-based catalysts. A product analysis suggested that this reaction involves 2-electron oxidation of the aldehyde group.

Determination of adrenal steroids by microfluidic chip using micellar electrokinetic chromatography.

This paper describes a sensitive and convenient method to separate progesterone, 17alpha-hydroxy progesterone, cortexolone, hydrocortisone and cortisone, all of which are steroids and have similar structures, using microfluidic chip-based technology with UV detection at 252 nm. We successfully obtained high-speed separation of the five steroids within 70 s in optimized microfluidic controls and micellar electrokinetic chromatography (MEKC) separation conditions. Fairly good linearity with correlation coefficient of over 0.98 from 10 or 20 to 100 mg/l steroid chemicals was obtained. The limits of detection obtained at a signal to noise ratio of 3 were from 3.89 to 7.80 mg/l. The values of the relative standard deviation (RSD) were 0.98-1.34% for repetitive injection (n = 12) and the intraday and interday RSDs were below 6%. The highly stable response reflected the feasibility of this method.

Determination of phosphate in seawater by CZE with on-line transient ITP.

We developed CZE with indirect UV detection for the determination of phosphate in seawater using transient ITP as an on-line concentration procedure. The following optimum conditions were established: BGE, 5 mM 2,6-pyridinedicarboxylic acid (PDC) containing 0.01% hydroxypropylmethylcellulose (HPMC) adjusted to pH 3.5; detection wavelength, 200 nm; vacuum injection period of sample, 3 s (45 nL); terminating ion solution, 500 mM MES adjusted to pH 4.0; vacuum injection period of the terminating ion solution, 30 s (450 nL); applied voltage, 30 kV with the sample inlet side as the cathode. The LOD for phosphate was 16 microg/L (PO(3-)(4) -P) at S/N of 3. The respective values of the RSD of the peak area, peak height, and migration time for phosphate were 2.6, 2.3, and 0.34%. The proposed method was applied to the determination of phosphate in a seawater certified reference material for nutrients, MOOS-1, distributed by the National Research Council of Canada (NRC). The results were very similar to certified values. The method was also applied to the determination of phosphate in coastal seawaters. The results agreed with those obtained using a conventional spectrophotometric method.

Determination of ammonium cations and alkali and alkaline earth metal cations in jellyfish by capillary zone electrophoresis.

We developed a capillary zone electrophoresis method with indirect UV detection for determination of ammonium cations and alkali and alkaline earth metal cations in jellyfish. As the background electrolyte, a mixture of N-methylbenzylamine, citrate, and 18-crown-6 was used for the complete separation of all analyte cations. The limits of detection were 0.13 - 0.34 mg l(-1) at a signal-to-noise ratio of three. The values of the relative standard deviation of peak area were 3.2 - 4.9%. The proposed method successfully determined the above analyte cations in jellyfish for approximately 4 min.

On-chip micellar electrokinetic chromatographic separation of phenolic chemicals in waters.

This paper describes on-chip micellar electrokinetic chromatography (MEKC) separation of bisphenol A and 3 kinds of alkylphenols, which have been recently recognized as endocrine disrupting chemicals for fish by the Japanese government, using microchip capillary electrophoresis with UV detection. We successfully obtained high-speed separation of the phenolic chemicals within 15 s as optimizing in microfluidic controls and MEKC separation conditions. We obtained fairly good linearity with correlation coefficient of over 0.98 from 0 to 50 mg/l phenolic chemicals except for 4-nonylphenol, which sample is the mixture of many geometrical isomers (r = 0.86). The values of the relative standard deviation for peak height in 50 mg/l phenolic chemicals were less than 8% except for bisphenol A (11.0%). The limits of detection obtained at a signal-to-noise ratio of 3 were from 5.6 to 20.0 mg/l. To realize on-site monitoring, we described strategy for on-chip MEKC analysis of the phenolic chemicals in waters using a portable analyzer based on microfluidic devices.

High-throughput nitric oxide assay in biological fluids using microchip capillary electrophoresis.

In order to develop a high-throughput screening method for the nitrogen monoxide metabolites, nitrite and nitrate, in biological fluids, we have investigated the simultaneous determination of these metabolites using microchip capillary electrophoresis (MCE). In this study, the control of applied voltage to obtain higher sensitivity by increasing the sample injection volume was investigated. Also, the improvement of reproducibility by correcting the injection volume using the internal standard was investigated. By increasing the sample volume, the limits of detection achieved for nitrite and nitrate were 24 and 12 microM, respectively. Because we used a 10-fold diluted sample when detecting nitrite and nitrate in human serum, it was necessary to increase the sensitivity by a factor of 10-50. The run-to-run and day-to-day relative standard deviations achieved were improved to less than 10% by using an internal standard to correct the injection volume. Moreover, we obtained successful separation of nitrite and nitrate in spiked human serum within 6.5 s under optimum analytical conditions. As a result, although it is necessary to obtain greater sensitivity, it was concluded that determination of the amount of NO metabolites in biological fluids using MCE is possible.

Determination of ammonium in river water and sewage samples by capillary zone electrophoresis with direct UV detection.

We developed capillary zone electrophoresis (CZE) with direct UV detection for determination of ammonium in environmental water samples. Ammonium in the samples was partly converted into ammonia in the alkaline background electrolyte (BGE) during migration and was detected by molecular absorption of ammonia at 190 nm in approximately 7 min. The limit of detection (LOD) for ammonium was 0.24 mg/l (as nitrogen) at a signal-to-noise ratio of three. The respective values of the relative standard deviation (RSD) of peak area, peak height, and migration time for ammonium were 2.1, 1.8, and 0.46%. Major alkali and alkaline earth metal ions coexisting in the samples did not interfere with ammonium determination by the proposed method. The proposed method determined ammonium in surface water and sewage samples. The results were compared to those obtained using ion chromatography (IC).

Simultaneous determination of nitrate and nitrite in biological fluids by capillary electrophoresis and preliminary study on their determination by microchip capillary electrophoresis.

In order to develop a highly sensitive and high-throughput screening method for nitrogen monoxide metabolites in biological fluids, we have investigated the simultaneous determination of nitrite and nitrate, using capillary electrophoresis and microchip capillary electrophoresis. In capillary zone electrophoresis, a running buffer based on human serum components with high ionic strength has been developed for the determination of nitrite and nitrate in human serum and human saliva. We obtained successful separation of nitrite and nitrate in the serum and the saliva within 7 min under optimum analytical conditions. Linear calibration curves for nitrite and nitrate for both peak height and area were obtained by a standard addition method. The limits of detection obtained at a signal-to-noise ratio (S/N) of 3 for nitrite and nitrate in the serum were 2.6 and 1.5 microM, respectively. The values of the relative standard deviation of peak height for the serum with 9.2 microM nitrite and 20.9 microM nitrate were 5.7 and 4.1%, respectively. For on-site analysis with high-throughput screening, a microchip capillary electrophoresis method using a microchip made of quartz with a UV detector was developed. In this high-throughput format, using a running buffer with an electroosmotic flow modifier, the peaks of nitrite and nitrate in an artificial serum sample were obtained within 8 s. In high-resolution mode, using the buffer without electroosmotic flow modifier, the separation of nitrite and nitrate was obtained within 15 s. In high-resolution mode, using an artificial serum sample with 50 microM NO2- and 50 microM NO3-, the limits of detection (S/N = 3) of 41 microM for NO2- and 26 microM for NO3- were obtained. The method was applied to human serum and saliva. We obtained peaks due to nitrite and nitrate in 10-fold diluted saliva.

Simultaneous separation and on-line concentration of amitrole and benzimidazole pesticides by capillary electrophoresis with a volatile migration buffer applicable to mass spectrometric detection.

This study used capillary electrophoresis (CE) to investigate the simultaneous separation and on-line concentration of five pesticides: amitrole (AMT), carbendazim (MBC), 2-aminobenzimidazole (ABI), thiabendazole (TBZ) and 1,2-diaminobenzene (DAB). A volatile migration buffer was used for the investigation because of the applicability to mass spectrometric (MS) detection. They were separated completely at pH 4.0 as a result of changing pH using formic acid-ammonium formate buffer. Values of the dissociation constant for MBC and DAB estimated from the changes in the mobility with pH showed good agreement with values in the literature. Dissociation constants for AMT and TBZ were estimated. Limits of detection (LODs) for the analytes were on the ppm level with UV detection under the optimized separation condition. On-line concentration by simple stacking mode was not effective except to 2-aminobenzimidazole because of the peak tailing. The addition of formic acid to sample matrix improved the peak shapes. That improvement may be attributed to transient isotachophoretic effect. The concentration factors obtained from the comparison of the LODs were in the range of 7.6-27-fold. This concentration method was applied preliminarily to CE with MS detection.

Simultaneous determination of iodide and iodate in seawater by transient isotachophoresis-capillary zone electrophoresis with artificial seawater as the background electrolyte.

We developed capillary zone electrophoresis with transient isotachophoresis (ITP) as an on-line concentration procedure for simultaneous determination of iodide and iodate in seawater. The effective mobility of iodide was decreased by addition of 20 mM cetyltrimethylammonium chloride to an artificial seawater background electrolyte so that transient ITP functioned for both iodide and iodate. Limits of detection for iodide and iodate were 4.0 and 5.0 microg/l (as iodine) at a signal-to-noise ratio of 3. Values of the relative standard deviation of peak area, peak height, and migration times for iodide and iodate were 2.9, 1.3, 1.0 and 2.3, 2.1, 1.0%, respectively. The proposed method was applied to simultaneous determination of iodide and iodate in seawater collected at a pond at our university.

Separation and on-line concentration of bisphenol A and alkylphenols by micellar electrokinetic chromatography with anionic surfactant.

Separation and on-line concentration of bisphenol A and three alkylphenols were investigated by micellar electrokinetic chromatography with the anionic surfactant, sodium dodecyl sulfate. The separation conditions were optimized by the simultaneous addition of the organic solvent and cyclodextrin to the running solution. The separation of hydrophobic analytes and 4-nonylphenol isomers was improved by the addition of 10% methanol and 5 mM beta-cyclodextrin to the running solution. When the sweeping with the running solution was used as the on-line concentration procedure, 69-, 48-, 55- and 41-fold increases in detection sensitivity were obtained for bisphenol A, 4-tert.-butylphenol and 4-(1,1,3,3-tetramethylbutyl)phenol, and the second peak of 4-nonylphenol isomers, respectively. The detection limits were 0.0071, 0.0065, 0.021 and 0.055 mg/l, respectively. These results were better than those with the cationic surfactant, tetradecyltrimethylammonium bromide.

Development of a novel running buffer for the simultaneous determination of nitrate and nitrite in human serum by capillary zone electrophoresis.

In order to improve NO2- peak height and obtain a convenient buffer system for the assay of nitrogen monooxide metabolites, we developed a novel running buffer for the simultaneous determination of nitrite and nitrate in human serum by capillary electrophoresis. The addition of cetyltrimethylammonium chloride to the running buffer resulted in high-speed separation using reverse electroosmotic flow. Highly sensitive determination was also achieved using stacking with 10-fold diluted sample solutions. The samples were injected hydrodynamically for 100 s into a 50 cm x 75 microm I.D. capillary. The separation voltage was 10 kV (negative polarity). UV detection was performed at 214 nm. We obtained complete separation of nitrite and nitrate in deproteinized human serum within 6 min with optimum analytical conditions. Linear calibration curves for nitrite and nitrate for both peak height and peak area were obtained with standard addition method. The limits of detection obtained at a signal-to-noise ratio of 3 for nitrite and nitrate were 4.1 and 2.0 microM, while the values of relative standard deviation of peak height were 2.4 and 2.6%, respectively.

Capillary zone electrophoretic determination of iodide in seawater using transient isotachophoresis with artificial seawater as the background electrolyte.

We describe an application of capillary zone electrophoresis (CZE) with transient isotachophoresis (ITP) as the on-line concentration procedure for the determination of iodide in seawater. The effective mobility of iodide was decreased by the addition of 10 mM cetyltrimethylammonium chloride (CTAC) to an artificial seawater background electrolyte (BGE) so that transient ITP functioned and iodide was separated from other coexisting anions such as bromide, nitrite, and nitrate in seawater samples. After sample injection, 600 mM acetate was separately injected into the capillary as the terminating ion to generate transient ITP. The limit of detection (LOD) for iodide was 3.0 microg/L. The LOD was obtained at a signal-to-noise ratio (S/N) of 3. The values of the relative standard deviation (RSD) of peak area, peak height, and migration time for iodide were 2.9, 2.1, and 0.6%. The proposed method was applied to the determination of iodide in seawater collected around the Osaka Bay. The results obtained by use of the calibration graph were agreed with those obtained by the addition of the standard solutions for iodide.

Optimum conditions for effective use of the terminating ion in transient isotachophoresis for capillary zone electrophoretic determination of nitrite and nitrate in seawater, with artificial seawater as background electrolyte.

We have examined transient isotachophoresis (ITP) conditions, e.g. the nature of the terminating ion, its concentration, and the injection procedure, to improve the limit of detection (LOD) for determination of nitrite and nitrate in seawater by capillary zone electrophoresis (CZE). Artificial seawater containing 3.0 mmol L(-1) cetyltrimethylammonium chloride (CTAC) was used as background electrolyte (BGE). After sample injection 600 mmol L(-1) acetate was separately injected into the capillary as the terminating ion for transient ITP. The LOD for nitrite and nitrate, obtained at a signal-to-noise ratio (S/N) of 3, were 15 and 7.0 microg L(-1) (as nitrogen), respectively. Relative standard deviations (RSD) of peak area for nitrite and nitrate were 7.3 and 0.8%, respectively, and the RSD of peak height were 5.7 and 1.2%, respectively, when the concentrations of nitrite and nitrate were 0.05 and 0.25 mg L(-1). The RSD of migration time for these ions was 0.2%. The proposed method was applied to the determination of nitrite and nitrate in seawater samples. The results for nitrite were nearly in agreement with those obtained by naphthylethylenediamine spectrophotometric analysis (SPA; correlation coefficient 0.9041).

Determination of nitrite and nitrate in a proposed certified reference material for nutrients in seawater by capillary zone electrophoresis with artificial seawater as the background electrolyte using transient isotachophoresis.

We describe a combination of selected ions as a terminating ion which is useful for transient isotachophoresis (ITP) in capillary zone electrophoresis (CZE) for the determination of nitrite and nitrate in seawater. In addition to 150 mM sulfate as the principal terminating ion, 10 mM bromate was added to a sample solution as the additional terminating ion. Artificial seawater containing 3 mM cetyltrimethylammonium chloride (CTAC) was adopted as a background electrolyte (BGE). The limits of detection (LODs) for nitrite and nitrate were 2.2 and 1.0 microg/L (as nitrogen), respectively. The LODs were obtained at a signal to noise ratio (S/N) of 3. The values of the relative standard deviation (RSD) of peak area for these ions were 1.9 and 1.4%. The RSDs of peak height were 1.7 and 1.9%, the RSDs of migration time 0.11%. The proposed method was applied to the determination of nitrite and nitrate in a proposed certified reference material for nutrients in seawater, MOOS-1, distributed by the National Research Council of Canada (NRC). The results almost agreed with the assigned tolerance interval.