Development of Tetrahydrofuran/Water Optical Waveguide and Its Application to the Observation of Extraction Behavior of 1-Anilino-8-naphtalene Sulfonate at the Tetrahydrofuran/Water Interface.

A stable two-phase sheath flow using tetrahydrofuran (THF) for an inner flow and water for an outer flow was formed in a glass capillary, and worked as a stable liquid-core/liquid-cladding optical waveguide (THF/water LLW). Although THF and water were miscible with any ratio, the length of the stable THF/water LLW at 0.9 - 2.1 cm s-1 reached at least 150 mm. The THF/water LLW was applied to the observation of extraction behavior of solvatochromic fluorescence dye, 1-anilino-8-naphtalene sulfonate (ANS), through the THF/water interface. ANS was added to the water phase (clad solution) and its fluorescence, which was excited with the guided light (355 nm) through the LLW, was observed by changing the position of the detector. While the ANS stayed in the region of 70% THF to the end of the LLW without the addition of cationic surfactant, hexadecyltrimethylammonium ion (CTA+) at pH 3 and 11, the ion-pair of ANS and CTA+ was extracted into the higher concentration region of THF with the addition of CTA+ at pH 11.

Surface plasmon field-enhanced fluorescence spectroscopy apparatus with a convergent optical system for point-of-care testing.

Surface plasmon field-enhanced fluorescence spectroscopy (SPFS) is a promising methodology for point-of-care (POC) testing. The SPFS devices that have been reported are equipped with an angle rotating stage to adjust the surface plasmon resonance (SPR) angle. In a clinical setting, however, the SPR angle determination is a tedious and time-consuming process. In this study, we employed an SPFS instrument with a convergent optical system that allows the omission of this procedure. We demonstrated that this instrumentation allowed the sensitive determination of low concentrations of α-fetoprotein in serum and reduced the variation effect caused by the protein concentrations in samples. The SPFS with a convergent optical system is suitable for POC testing.

Effect of dielectric spacer thickness on signal intensity of surface plasmon field-enhanced fluorescence spectroscopy.

Surface plasmon field-enhanced fluorescence spectroscopy (SPFS) combines enhanced field platform and fluorescence detection. Its advantages are the strong intensity of the electromagnetic field and the high signal/noise (S/N) ratio due to the localized evanescent field at the water/metal interface. However, the energy transfer from the fluorophore to the metal surface diminishes the fluorescence intensity, and this reduces the sensitivity. In this study, we tested whether polystyrene (PSt) could act as a dielectric layer to suppress the energy transfer from the fluorophore to the metal surface. We hypothesized that this would improve the sensitivity of SPFS-based immunoassays. We used α-fetoprotein (AFP) as a model tumor biomarker in the sandwich-type immunoassay. We determined the relationship between fluorescent signal intensity and PSt layer thickness and compared this to theoretical predictions. We found that the fluorescence signal increased by optimally controlling the thickness of the PSt layer. Our results indicated that the SPFS-based immunoassay is a promising clinical diagnostic tool for quantitatively determining the concentrations of low-level biomarkers in blood samples.

Flow injection spectrophotometric determination of sub-mg dm(-3) silver(I) in a strongly acidic solution containing concentrated copper(II) using a pyridylazo reagent.

A novel spectrophotometric flow injection method for determination of silver(I) in a strongly acidic solution containing concentrated copper(II) was developed using a coloring ligand, 4-(3,5-dibromo-2-pyridylazo)-N-ethyl-N-(3-sulfopropyl)aniline (3,5-diBr-PAESA). The method was first investigated by batch method. The interference from copper(II) chelate could be eliminated by the masking effect of EDTA. By utilizing the large formation constant (K = 12.3) of AgBr, one could determine silver(I) as a decrease of absorption by silver(I) chelate due to formation of AgBr by addition of KBr. Based on the results of batch experiments, two types of flow injection analysis (FIA) systems were constructed. Sub-mg dm(-3) determination of silver(I) was attained without interference from excess copper(II). The proposed method was successfully applied to determination of silver in a copper plating solution used in a plant to manufacture copper printed circuit boards, where the concentration of silver was critically important in the process control.

Surface plasmon resonance and surface plasmon field-enhanced fluorescence spectroscopy for sensitive detection of tumor markers.

Surface plasmon resonance (SPR), which provides real-time, in situ analysis of dynamic surface events, is a valuable tool for studying interactions between biomolecules. In the clinical diagnosis of tumor markers in human blood, SPR is applied to detect the formation of a sandwich-type immune complex composed of a primary antibody immobilized on a sensor surface, the tumor marker, and a secondary antibody. However, the SPR signal is quite low due to the minute amounts (ng-pg/mL) of most tumor markers in blood. We have shown that the SPR signal can be amplified by applying an antibody against the secondary antibody or streptavidin-conjugated nanobeads that specifically accumulate on the secondary antibody. Another method employed for highly sensitive detection is the surface plasmon field-enhanced fluorescence spectroscopy-based immunoassay, which utilizes the enhanced electric field intensity at a metal/water interface to excite a fluorophore. Fluorescence intensity attributed to binding of a fluorophore-labeled secondary antibody is increased due to the enhanced field in the SPR condition and can be monitored in real time.

Slab optical waveguide high-acidity sensor based on an absorbance change of protoporphyrin IX.

A sensitive and fast-responsive evanescent wave absorption sensor has been constructed for pH measurements in highly acidic ranges. This sensor is based on a pH-dependent color change of protoporphyrin IX (PPIX). For the sensitive detection, a visible attenuated total reflection spectrometer with a slab optical waveguide (SOWG) was laboratory-made, and the guiding layer surface was modified with a PPIX-immobilized acrylamide-based thin membrane. The sensing membrane with a thickness of approximately 1 mum was directly fabricated on the SOWG glass surface by copolymerization of acrylamide, N,N'-methylene bisacrylamide, and PPIX in the narrow space confined by a cover plate. PPIX possesses two double bonds in its structure, and so it can be covalently incorporated into the membrane. The response characteristics of the PPIX-immobilized optode membrane were explored using aqueous solutions with different concentrations of HNO(3) or HCl. The optode membrane provided characteristic Soret band absorption spectra depending on the hydrogen ion concentration; the absorbance at 410 nm increased with increasing the concentrations in the range of 0.15-2 M, corresponding to the range of pH -0.3 to 0.8. The absorption signal reached 90% of its final value within 10 s, while the absorption signal was quite readily returned to background level simply by passing 2 mL of distilled water through a flow cell with a volume of 16.5 muL placed on the SOWG. Due to the rapid response and reversibility, this sensor could be operated in a flow-through mode as well as in a conventional static mode, where deionized water was conveniently used as a carrier and conditioning solution. In terms of the stability and precision, this sensor showed no significant change in response even after 100 assays and after being stored in a dry condition for over 6 months. Relative standard deviations for 10 replicate measurements were less than 1.8% in the linear range, and the detection limit calculated from 3 times of the standard deviation was 0.02 pH unit.

Liquid core waveguide spectrophotometry for the sensitive determination of nitrite in river water samples.

A flow injection analysis system was built with a liquid core waveguide spectrophotometric detector using an 80 cm Teflon AF-1600 capillary tube (2,2-bistrifluoromethyl-4,5-difluoro-1,3-dioxole/tetrafluoroethylene). The system was applied to determine nitrite ion in river water samples. The lower limit of detection for nitrite was 2.1 nmol dm(-3) (0.1 ng dm(-3) as NO(2)(-)) and the relative standard deviation of measurements was typically 0.56% (n = 5) at 0.21 micromol dm(-3).

Characteristics of a liquid/liquid optical waveguide using sheath flow and its application to detect molecules at a liquid/liquid interface.

The formation conditions and characteristics of a liquid/liquid optical waveguide (LLW) were studied using a two-phase sheath flow, where the inner organic phase flow acted as the core and the outer aqueous flow acted as the clad. In immiscible solvent systems, i.e., toluene/water and diethyl ether/water systems, the LLWs were formed in the range of higher than ca. 600 of the Reynolds number (Re), where the linear velocity of the organic solvent was much higher than that of the aqueous solution. On the other hand, in a miscible solvent system, i.e., a tetrahydrofuran/water system, a stable LLW was formed in the range of a much lower Re than in immiscible systems. Moreover, the molecules at the toluene/water interface of the LLW were observed with both fluorescence and absorbance measurement systems. In particular, the change in the fluorescence spectrum of 1-anilino-8-naphthalenesulfonate (ANS) at the interface within 1 ms was observed by this method, indicating the usefulness of the LLW for a fast kinetic study of a liquid/liquid interface.

Liquid/liquid optical waveguides using sheath flow as a new tool for liquid/liquid interfacial measurements.

A liquid/liquid optical waveguide was constructed using a sheath flow. Since the refractive index of an organic solvent is generally higher than that of water (nD = 1.33), light introduced into the inner organic flow should proceed with total multi-reflection within the inner flow, so that the inner part of the sheath flow acts as the core of an optical waveguide. This sheath flow liquid/liquid optical waveguide was stable and showed no substantial background scattering. Moreover, it is applicable to both miscible and immiscible liquid/ liquid interfaces. Thus, it may become a new tool for studying liquid/liquid interfaces as well as for sensitive optical measurements.