The influence of amorphization methods on the apparent solubility and dissolution rate of tadalafil.

This study for the first time investigates the solubility and dissolution rate of amorphous tadalafil (Td)--a poorly water soluble chemical compound which is commonly used for treating the erectile dysfunction. To convert the crystalline form of Td drug to its amorphous counterpart we have employed most of the commercially available amorphization techniques i.e. vitrification, cryogenic grinding, ball milling, spray drying, freeze drying and antisolvent precipitation. Among the mentioned methods only quenched cooling of the molten sample was found to be an inappropriate method of Td amorphization. This is due to the thermal decomposition of Td above 200°C, as proved by the thermogravimetric analysis (TGA). Disordered character of all examined samples was confirmed using differential scanning calorimetry (DSC) and X-ray powder diffraction (PXRD). In the case of most amorphous powders, the largest 3-fold increase of apparent solubility was observed after 5 min, indicating their fast recrystallization in water. On the other hand, the partially amorphous precipitate of Td and hypromellose enhanced the solubility of Td approximately 14 times, as compared with a crystalline substance, which remained constant for half an hour. Finally, disk intrinsic dissolution rate (DIDR) of amorphous forms of Td was also examined.

The electronic structure of UCoGe by ab initio calculations and XPS experiment.

The crystal and electronic structures of the orthorhombic compound UCoGe are presented and discussed. It has been either refined by the x-ray diffraction on a single crystal or computed within the local spin density functional theory, employing the fully relativistic version of the full-potential local-orbital band structure code, respectively. We particularly give our attention to investigating the Fermi surface and de Haas-van Alphen quantities of UCoGe. The calculated electronic density is then examined by x-ray photoelectron spectroscopy (XPS). Fairly good agreement is achieved between theoretical and experimental XPS results in the paramagnetic state. A small difference in the position (in energy scale) of the U 5f bands is caused by the electron localization effect observed in the experimental XPS. There is also some discrepancy for the Co 3d electron contributions below E(F). The Fermi surface in the non-magnetic state is of a semimetallic type while that in the ferromagnetic state, with the ordered moment of -0.47 µ(B)/f.u. along the c axis, is more metallic, with nesting properties that may favour superconductivity.

Sonochemical preparation of antimony subiodide.

The substantiated isolation of the antimony subiodide (Sb(3)I) is presented for the first time. It has been prepared using elemental Sb and I in ethanol under ultrasonic irradiation at 323 K. Its composition was characterized using X-ray photoelectron spectroscopy (XPS) and energy dispersive X-ray analysis (EDAX). The scanning electron microscopy (SEM) and high-resolution transmission electron microscopy (HRTEM) investigations exhibit that the samples are made up of large quantity of nanoparticles with diameters smaller than 20 nm and single crystalline in nature. The interplanar spacings in Sb(3)I that have been determined using powder X-ray diffraction (XRD), selected area electron diffraction (SAED) and HRTEM are very similar. Surprisingly, the registered XRD patterns are identical to the one reported earlier for Sb(4)O(5)I(2).

Spectroscopic characterization of natural corals.

The FTIR, micro-Raman, NMR, and XPS spectra of 25 different natural corals have been compared. Reflectance and transmission absorbance IR and Raman data have been used as rapid and efficient means of classification of natural corals containing aragonite (non-precious white species), calcite (red, pink, precious white species), and organic material (black protein polymer). The combination of reflectance IR and infrared microscopy could serve as a rapid, non-destructive method for distinguishing natural corals from artificial, fake jewels.

Investigation of winter atmospheric aerosol particles in downtown Katowice using XPS and SEM.

X-ray photoelectron spectroscopy (XPS) was used to determine the surface chemical composition of atmospheric particles (PM-10 and PM-2.5), collected in downtown Katowice, Upper Silesia, Poland, in the winter season (November and December 2000). Carbon- and oxygen-containing species dominated the particulate surface with traces of N, S, Si, Cl, Na, Zn, Al, Cu, Fe, Ca, K, Mg, Pb, and P present. Additionally, the size, morphology, and chemical composition of about 300 of the individual atmospheric particles were analyzed by high-resolution scanning electron microscopy and electron probe microanalysis. A number of aluminosilicates and metallic elements such as Fe, K, Mg, Zn, as well as rare earth elements, were detected by SEM. The results obtained show that the analyzed aerosol is of natural and anthropogenic origin. Particles containing sulfur compounds as well as oxygen and sodium in downtown Katowice come mainly from the east and southeast sectors.

Optical and chemical characteristics of the atmospheric aerosol in four towns in southern Poland.

The absorption coefficient a(p) [m(-1)] as well as the mass absorption coefficient sigma(p) [m(2)/g] has been estimated for PM10 and PM2.5 in four towns located in southern Poland, based on the assumption that the reflectance of aerosol-laden filters is a good proxy for the absorptivity of aerosols. The optical properties of the airborne particles were also compared with their surface composition obtained by photoelectron spectroscopy (XPS). It was found that coarse particles, which constituted 20-30% of PM10, exhibited insignificant contribution to the absorption. The most absorptive aerosols were found in the towns located in Upper Silesia, a highly industrialized area. This reflects both the relative content of carbon in PM2.5 and the mass concentration of the fine mode. It was found that oxides and sulfates play an important role in promoting the reflectance of light from aerosols in the winter. These results support the suggestion that the revision of existing air quality standards for particulate pollution is needed.