ABSTRACT
Pancharatnam-Berry phase optical elements (PBOEs) have received much attention due to their ability to generate complex structured light or to manipulate the shape of a light beam. This work demonstrates a tunable liquid crystal (LC) Pancharatnam-Berry (LCPB) lens using a simple and cost-effective PB phase hologram optical setup and thermal polymerization to form an irreversible photo-patterning alignment layer. The LCPB lens with high photo-stability supports ultra-broadband operation and provides a diffraction efficiency of â¼90% throughout the visible spectral range, achieved by applying the appropriate voltages. The LCPB lens functions as a convex or a concave lens, depending on the handedness of the circularly polarized incident light, so its image reduction and magnification functions are demonstrated, and its photo-stability is characterized. The fabrication of the proposed LC PBOEs is simpler and more cost-effective than previous methods, and the irreversible photo-patterning alignment layer that is formed by thermal polymerization allows larger operational bandwidths, supporting new applications.
ABSTRACT
A ferroelectric liquid crystal (FLC) cell with continuously alignment structure is realized by a polarization hologram method for fabricating a Pancharatnam-Berry (PB) lens, which is employed as a concave/convex lens. The PB phase can be maintained by the optical axis in-plane switching; meanwhile, its diffraction efficiency can be tuned in a certain range by electrically controlling azimuthal angle and optical biaxiality of the smectic helical structure realized by deformed helix ferroelectric liquid crystals. The measured diffraction efficiency of the fabricated device is up to 87% and the response time can be 300µs with a low electric voltage. The FLC PB lens can have potential applications in existing optical devices and the realization of FLC with continuous alignment structure can be further used for other LC-based optical devices.
ABSTRACT
We disclose a method of fabricating a low-voltage-driven smart glass based on micro-patterned liquid crystal (LC) Fresnel lenses and implement three proof-of-concept prototypes. Distinct from the conventional LC-based smart windows with the scattering state, the prominence of our proposed LC smart glass in blurry state under both normal and oblique observations stems from the image distortion caused by LC Fresnel lenses. In addition, the high transmittance (>90%) in clear state is obtained by applying a low voltage of 2 V to each prototype. Moreover, by elaborating the design of the LC smart glass, the reversed switching states [i.e., a clear (voltage OFF) state and a blurry (voltage ON) state] and fast switching time can be simultaneously achieved.
ABSTRACT
Bistable electrical switching of high-efficiency grating diffractions is realized by adding a front π-bistable twisted nematic (π-BTN) cell to a passive liquid crystal polarization grating (LCPG). The π-BTN cell can be switched between stable non- and 180°-twisted states, acting as a polarization converter that switches the polarization of a laser beam and thus changes the diffraction behavior of the LCPG. Both states of the π-BTN cell are stable and can be reversibly switched to each other by applying a voltage pulse of different frequencies. We experimentally demonstrate two bistable-switching operations: (i) the BTN-LCPG can either split or deflect the laser beam; and (ii) the BTN-LCPG can selectively diffract the laser beam to the +1st and -1st orders, while maintaining a high diffraction efficiency of â¼90%. With electrical switchability, a simple optical design, and low power consumption, the proposed BTN-LCPG concept is favorable in various applications.
ABSTRACT
Perovskite solar cells (PSCs) are one of the promising photovoltaic technologies for solar electricity generation. NiO x is an inorganic p-type semiconductor widely used to address the stability issue of PSCs. Although high efficiency is obtained for the devices employing NiO x as the hole transport layer, the fabrication methods have yet to be demonstrated for industrially relevant manufacturing of large-area and high-performance devices. Here, it is shown that these requirements can be satisfied by using the magnetron sputtering, which is well established in the industry. The limitations of low fill factor and short-circuit current commonly observed in sputtered NiO x -derived PSCs can be overcome through magnesium doping and low oxygen partial pressure deposition. The fabricated PSCs show a high power conversion efficiency of up to 18.5%, along with negligible hysteresis, improved ambient stability, and high reproducibility. In addition, good uniformity is also demonstrated over an area of 100 cm2. The simple and well-established approach constitutes a reliable and scale method paving the way for the commercialization of PSCs.
ABSTRACT
We reveal a 2D-3D switchable lens unit that is based on a polarization-sensitive microlens array and a polarization selector unit made of an electrically suppressed helix ferroelectric liquid crystal (ESHFLC) cell. The ESHFLCs offer a high contrast ratio (â¼10kâ¶1) between the crossed polarizers at a low applied electric field (â¼1.7 V/µm) with a small switching time (<50 µs). A special driving scheme, to switch between a 2D and 3D mode, has been developed to avoid unwanted issues related to DC accumulation in the ferroelectric liquid crystal without affecting its optical quality. The proposed lens unit is characterized by low power consumption, ultrafast response, and 3D crosstalk <5%, and can therefore find application in TVs, cell phones, etc.
ABSTRACT
A strategy for integrated and reconfigurable optical paths based on stacking optical functional films is proposed. It is demonstrated by stacking two liquid crystal polymer q-plates and one quarter-wave plate for vector vortex beams generation. The topological charge and polarization order of generated vector vortex beams can be controlled independently by stacking and reordering different optical films with repeated adhesive ability. It supplies a low-cost, light-weight and versatile technique for reducing the volume of free-space optical system and has a great potential in optical researches and applications.
ABSTRACT
A special design of a complex-ordered liquid crystal polymer film is developed into a holographic polarizer. The holographic polarizer shows over 90% transmittance, which provides a simple solution to make LEDs polarized. Furthermore, the holographic polarizer exhibits intensity and polarization maintenance properties, which could be further developed for photonics applications.
Subject(s)
Holography/instrumentation , Liquid Crystals/chemistry , Optical Phenomena , Polymers/chemistry , Azo Compounds/chemistry , Coloring Agents/chemistry , Light , Sulfonic Acids/chemistryABSTRACT
In this Letter we disclose a method to realize a good alignment of ferroelectric liquid crystals (FLCs) in microchannels, based on photo-alignment. The sulfonic azo dye used in our research offers variable anchoring energy depending on the irradiation energy and thus provides good control on the FLC alignment in microchannels. The good FLC alignment has been observed only when anchoring energy normalized to the capillary diameter is less than the elastic energy of the FLC helix. The same approach can also be used for the different microstructures viz. photonic crystal fibers, microwaveguides, etc. which gives an opportunity for designing a photonic devices based on FLC.
