ABSTRACT
PIM-1/holey graphene oxide (GO) mixed matrix membranes (MMMs) have been prepared and their gas separation performance for CO2/CH4 mixtures assessed. Nanopores have been created in the basal plane of gas-impermeable GO by chemical etching reactions, and the resulting holey flakes have been further chemically functionalized, either with octadecylamine (ODA) or with PIM-1 moieties, to aid their dispersion in PIM-1. It is found that nanopores barely promote gas transport through the graphene-like nanofiller for fresh membranes (tested right after preparation); however, the prepared hybrid PIM-1/holey GO membranes exhibit higher CO2 permeability and CO2/CH4 selectivity than the pure polymer membrane 150 days after preparation and 13 and 15% higher CO2 permeability for filler contents of 0.1% of octadecylamine-functionalized holey GO and 1% of (PIM-1)-functionalized holey GO, respectively. The most significant improvement is observed for the mitigation of physical aging, as MMMs using 10% of (PIM-1)-functionalized holey GO nanofillers are capable of maintaining up to 70% of their initial CO2 permeability after 150 days, whereas only 53% is kept for pure PIM-1 after the same period. The gas permeability of the nanofiller has been rationalized with the aid of the Maxwell-Wagner-Sillars equation.
ABSTRACT
A low cross-link density (LCD) network-PIM-1, which offers high compatibility with the polymer of intrinsic microporosity PIM-1, is synthesized by a modified PIM-1 polycondensation that combines both a tetrafluoro- and an octafluoro-monomer. To maximize the advantages of utilizing such cross-linked PIM-1 fillers in PIM-1-based mixed matrix membranes (MMMs), a grafting route is used to decorate the LCD-network-PIM-1 (dispersed phase) with PIM-1 chains, to further enhance compatibility with the PIM-1 matrix. Mixed-gas CO2/CH4 (1:1, v/v) separation results over 160 days of membrane aging confirm the success of a relatively short (24 h) grafting reaction in improving the initial CO2 separation performance, as well as hindering the aging of PIM-1/grafted-LCD-network-PIM-1 MMMs. For MMMs based on a 24 h grafting route, all the gas separation data surpass the 2008 Robeson upper bound by a significant margin, and the 160-day aged membranes show only 29% reduction from the initial CO2 permeability, which is substantially less than the equivalent losses of nearly 70% and 48% for PIM-1 and traditionally fabricated MMMs counterparts, respectively. These results demonstrate the potential of network-PIM components for obtaining much more stable gas separation performance over extended periods of time.
ABSTRACT
Microporous polymer nanosheets with thicknesses in the range 3-5 nm and with high apparent surface area (Brunauer-Emmett-Teller surface area 940 m2 g-1 ) are formed when the effectively bifunctional (tetrafluoro) monomer used in the preparation of the prototypical polymer of intrinsic microporosity PIM-1 is replaced with an effectively tetrafunctional (octafluoro) monomer to give a tightly crosslinked network structure. When employed as a filler in mixed-matrix membranes based on PIM-1, a low loading of 0.5 wt% network-PIM-1 nanosheets gives rise to enhanced CO2 permeability and CO2 /CH4 selectivity, compared to pure PIM-1.
