Understanding voltage-controlled magnetic anisotropy effect at Co/oxide interface.

The voltage-controlled magnetic anisotropy (VCMA) effect is a key to realising high-speed, ultralow-power consumption spintronic devices. The fcc-Co-(111)-based stack is a promising candidate for the achievement of large VCMA coefficients. However, only a few studies on the fcc-Co-(111)-based stack have been reported and the VCMA effect has not been well understood. Previously, we observed a significant increase in the voltage-controlled coercivity (VCC) in the Pt/Ru/Co/CoO/TiOx structure upon post-annealing. However, the mechanism underlying this enhancement remains unclear. This study performs multiprobe analyses on this structure before and after post-annealing and discusses the origin of the VCMA effect at the Co/oxide interface. X-ray magnetic circular dichroism measurement revealed an increase in the orbital magnetic moment owing to post-annealing, accompanied by a significant increase in VCC. We speculate that the diffusion of Pt atoms into the vicinity of Co/oxide interface enhances the interfacial orbital magnetic moment and the VCMA at the interface. These results provide a guideline for designing structures to obtain a large VCMA effect in fcc-Co-(111)-based stacks.

Large voltage-induced coercivity change in Pt/Co/CoO/amorphous TiOx structure and heavy metal insertion effect.

There is urgent need for spintronics materials exhibiting a large voltage modulation effect to fulfill the great demand for high-speed, low-power-consumption information processing systems. Fcc-Co (111)-based systems are a promising option for research on the voltage effect, on account of their large perpendicular magnetic anisotropy (PMA) and high degree of freedom in structure. Aiming to observe a large voltage effect in a fcc-Co (111)-based system at room temperature, we investigated the voltage-induced coercivity (Hc) change of perpendicularly magnetized Pt/heavy metal/Co/CoO/amorphous TiOx structures. The thin CoO layer in the structure was the result of the surface oxidation of Co. We observed a large voltage-induced Hc change of 20.2 mT by applying 2 V (0.32 V/nm) to a sample without heavy metal insertion, and an Hc change of 15.4 mT by applying 1.8 V (0.29 V/nm) to an Ir-inserted sample. The relative thick Co thickness, Co surface oxidation, and large dielectric constant of TiOx layer could be related to the large voltage-induced Hc change. Furthermore, we demonstrated the separate adjustment of Hc and a voltage-induced Hc change by utilizing both upper and lower interfaces of Co.

Voltage-Driven Magnetization Switching Controlled by Microwave Electric Field Pumping.

We study the dynamic switching properties of a nanomagnet under microwave electric field pumping. The periodic modulation of an anisotropy field induced by microwave electric field pumping efficiently excites the uniform magnetization oscillation, allowing for precise control of magnetization switching. Accurate shaping of the pumping voltage waveform also enables us to investigate the transient reaction of magnetization to the relative phase difference of the pumping signal. We demonstrate both experimentally and theoretically the existence of a dead angle in which the uniform oscillation of magnetization is inhibited even though the microwave frequency itself satisfies the conditions of parametric excitation. Our results provide an energy-efficient way of manipulating ultrafast magnetization dynamics in nanomagnetic devices.

Extremely Coherent Microwave Emission from Spin Torque Oscillator Stabilized by Phase Locked Loop.

Spin torque oscillator (STO) has been attracting a great deal of attention as a candidate for the next generation microwave signal sources for various modern electronics systems since its advent. However, the phase noise of STOs under free running oscillation is still too large to be used in practical microwave applications, thus an industrially viable means to stabilize its oscillation has been strongly sought. Here we demonstrate implementation of a phase locked loop using a STO as a voltage controlled oscillator (VCO) that generates a 7.344 GHz microwave signal stabilized by a 153 MHz reference signal. Spectrum measurement showed successful phase locking of the microwave signal to the reference signal, characterized by an extremely narrow oscillation peak with a linewidth of less than the measurement limit of 1 Hz. This demonstration should be a major breakthrough toward various practical applications of STOs.

Charge-based scanning probe readback of nanometer-scale ferroelectric domain patterns at megahertz rates.

We present a method for data storage in continuous ferroelectric (FE) media, applicable to storage systems based on one or more scanning probes. Written FE domains are read back in a destructive fashion by applying a constant voltage of magnitude greater than the coercive voltage, as is done in FE random access memory (FeRAM). The resulting flow of screening charges through the readback amplifier provides sufficient signal to allow readback of domains of minimum dimension of the order of 10 nm at MHz rates, orders of magnitude faster than previously demonstrated techniques for readback of domains in continuous FE media.