In-line monitoring of Bordetella pertussis cultivation using fluorescence spectroscopy.

Fluorescence spectroscopy is a non-invasive and highly sensitive method for bioprocess monitoring. The use of fluorescence spectroscopy is not very well established in the industry for in-line monitoring. In the present work, a 2-D fluorometer with two excitation lights (365 and 405 nm) and emission spectra in the range of 350-850 nm were used for in-line monitoring of two strains of Bordetella pertussis cultivation operated in batch and fed batch. A Partial Least Squares (PLS) based regression model was used for the estimation of cell biomass, amino acids (glutamate and proline) and antigen (Pertactin) produced. It was observed that accurate predictions were achieved when models were calibrated separately for each cell strain and nutrient media formulation. Also, prediction accuracy was improved when dissolved oxygen, agitation and culture volume are added as additional features in the regression model. The proposed approach of combining in-line fluorescence and other online measurements is shown to have good potential for in-line monitoring of bioprocesses.

Applications of flow cytometry sorting in the pharmaceutical industry: A review.

The article reviews applications of flow cytometry sorting in manufacturing of pharmaceuticals. Flow cytometry sorting is an extremely powerful tool for monitoring, screening and separating single cells based on any property that can be measured by flow cytometry. Different applications of flow cytometry sorting are classified into groups and discussed in separate sections as follows: (a) isolation of cell types, (b) high throughput screening, (c) cell surface display, (d) droplet fluorescent-activated cell sorting (FACS). Future opportunities are identified including: (a) sorting of particular fractions of the cell population based on a property of interest for generating inoculum that will result in improved outcomes of cell cultures and (b) the use of population balance models in combination with FACS to design and optimize cell cultures.

Investigation of the effects of oxidative stress-inducing factors on culturing and productivity of Bordetella pertussis.

The stress response of Bordetella pertussis during fermentation was assessed by means of fluorescence-based techniques. During the manufacturing of vaccines, B. pertussis is subjected to stress during adaptation to a new environment and operating conditions in the bioreactor, which can have harmful consequences on growth and protein yield. In this study, stress was imposed by varying the percentage of dissolved oxygen (DO) and inoculum size, and by adding rotenone and hydrogen peroxide. In this study, fluorescence spectroscopy is used as a tool for measuring oxidative stress. High levels of DO during fed-batch operation had no detrimental effect on growth, but the specific productivity of pertactin (PRN) decreased. Cultures that were started with an inoculum size that was 10 times smaller than the control resulted in significantly less PRN as compared to controls where reduction was more significant in flasks as compared to bioreactors. A comparison of filtered to heat-sterilized media revealed that filtered media offered a protective effect against H2 O2 . Heat sterilization of the media might result in the destruction of components that offer protection against oxidative stress. Nonetheless, filter sterilization on its own would be insufficient for large-scale manufacturing. It should be emphasized that the effects of these stressors while investigating for other microorganisms have not been studied for B. pertussis.

Hydrodynamic performance of a single-use aerated stirred bioreactor in animal cell culture: applications of tomography, dynamic gas disengagement (DGD), and CFD.

The hydrodynamics of gas-liquid two-phase flow in a single-use bioreactor were investigated in detail both experimentally and numerically. Electrical resistance tomography (ERT) and dynamic gas disengagement (DGD) combined with computational fluid dynamics (CFD) were employed to assess the effect of the volumetric gas flow rate and impeller speed on the gas-liquid flow field, local and global gas holdup values, and Sauter mean bubble diameter. From the results obtained from DGD coupled with ERT, the bubble sizes were determined. The experimental data indicated that the total gas holdup values increased with increasing both the rotational speed of impeller and volumetric gas flow rate. Moreover, the analysis of the flow field generated inside the aerated stirred bioreactor was conducted using CFD results. Overall, a more uniform distribution of the gas holdup was obtained at impeller speeds ≥ 100 rpm for volumetric gas flow rates ≥ 1.6 × 10-5 m3/s.

Monitoring of an antigen manufacturing process.

Fluorescence spectroscopy in combination with multivariate statistical methods was employed as a tool for monitoring the manufacturing process of pertactin (PRN), one of the virulence factors of Bordetella pertussis utilized in whopping cough vaccines. Fluorophores such as amino acids and co-enzymes were detected throughout the process. The fluorescence data collected at different stages of the fermentation and purification process were treated employing principal component analysis (PCA). Through PCA, it was feasible to identify sources of variability in PRN production. Then, partial least square (PLS) was employed to correlate the fluorescence spectra obtained from pure PRN samples and the final protein content measured by a Kjeldahl test from these samples. In view that a statistically significant correlation was found between fluorescence and PRN levels, this approach could be further used as a method to predict the final protein content.

A dynamic metabolic flux balance based model of fed-batch fermentation of Bordetella pertussis.

A mathematical model based on a dynamic metabolic flux balance (DMFB) is developed for a process of fed-batch fermentation of Bordetella pertussis. The model is based on the maximization of growth rate at each time interval subject to stoichiometric constraints. The model is calibrated and verified with experimental data obtained in two different bioreactor experimental systems. It was found that the model calibration was mostly sensitive to the consumption or production rates of tyrosine and, for high supplementation rates, to the consumption rate of glutamate. Following this calibration the model correctly predicts biomass and by-products concentrations for different supplementation rates. Comparisons of model predictions to oxygen uptake and carbon emission rates measurements indicate that the TCA cycle is fully functional.