ABSTRACT
OBJECTIVE: To test the biomechanical properties of 3D printed tantalum and titanium porous scaffolds. METHODS: Four types of tantalum and titanium scaffolds with four alternative pore diameters, #1 (1000-700 µm), #2 (700-1000 µm), #3 (500-800 µm), and #4 (800-500 µm), were molded by selective laser melting technique, and the scaffolds were tested by scanning electronic microscope, uniaxial-compression tests, and Young's modulus tests; they were compared with same size pig femoral bone scaffolds. RESULTS: Under uniaxial-compression tests, equivalent stress of tantalum scaffold was 411 ± 1.43 MPa, which was significantly larger than the titanium scaffolds (P < 0.05). Young's modulus of tantalum scaffold was 2.61 ± 0.02 GPa, which was only half of that of titanium scaffold. The stress-strain curves of tantalum scaffolds were more similar to pig bone scaffolds than titanium scaffolds. CONCLUSION: 3D printed tantalum scaffolds with varying pore diameters are more similar to actual bone scaffolds compared with titanium scaffolds in biomechanical properties.