Your browser doesn't support javascript.
loading
Show: 20 | 50 | 100
Results 1 - 8 de 8
Filter
Add more filters










Database
Language
Publication year range
1.
Opt Express ; 25(14): 16643-16651, 2017 Jul 10.
Article in English | MEDLINE | ID: mdl-28789165

ABSTRACT

We demonstrate generation of widely tunable femtosecond pulses by utilizing the soliton self-frequency shift effect in a Tm-doped fiber amplifier, seeded by dispersion managed mode-locked Tm oscillator. The monochromatic soliton pulses with a duration of the order of 100 fs have been obtained and its wavelength can be adjusted continuously in the range of 1.9-2.36 µm by varying the pump power. The efficiency of Raman conversion is as high as 97% with output power up to 1.16 W. The experimental results are in good agreement with numerical simulations of pulse propagation in Tm-doped fiber amplifier.

2.
Opt Express ; 24(20): 22461-22468, 2016 Oct 03.
Article in English | MEDLINE | ID: mdl-27828319

ABSTRACT

We present a compact thulium-doped chirped pulse amplifier producing 241 fs pulses with 1 µJ energy. The system is seeded with the Raman shifted soliton generated by the combination of an erbium-doped femtosecond laser and a nonlinear fiber. The Tm-doped large mode area fiber yields output power of 71 W, corresponding to pulse energy of 2.04 µJ, with a slope efficiency of 52.2%. The amplified pulses have been compressed to a duration time of 241 fs, using a folded Treacy grating setup. The pulse energy is measured to be 1.02 µJ, corresponding to a peak power of ~3 MW. To the best of our knowledge, this is the highest average power and pulse energy generated from an all-fiber, Raman shifted soliton seeded thulium-doped chirped pulse amplifier system.

3.
Opt Express ; 24(20): 22806-22812, 2016 Oct 03.
Article in English | MEDLINE | ID: mdl-27828348

ABSTRACT

We report a high-power all-fiber-integrated femtosecond chirped pulse amplification system operating at 1064 nm, which consists of a dispersive wave source, a fiber stretcher, a series of ytterbium-doped amplifiers and a chirped volume Bragg grating (CVBG) compressor. The dispersive wave is generated by an erbium-doped mode-locked fiber laser with frequency shifted to the 1 µm region in a highly nonlinear fiber. With three stages of ytterbium-doped amplification, the average output power is scaled up to 125 W. Through CVBG, the pulse duration is compressed from 525 ps to 566 fs, the average output power of 107 W with a high compression efficiency of 86% is achieved, and the measured repetition rate is 17.57 MHz, corresponding to the peak power of 10.8 MW.

4.
Opt Express ; 23(5): 6292-303, 2015 Mar 09.
Article in English | MEDLINE | ID: mdl-25836850

ABSTRACT

Different pulse-shaping mechanisms were investigated experimentally and numerically in passively mode-locked thulium-doped fiber lasers. Conventional solitons were demonstrated in a passively semiconductor saturable absorber mirror mode-locked anomalous dispersion thulium-doped fiber laser. With normal dispersion fiber and spectral filter added in cavity, pulse-shaping processes were theoretically analyzed in the presence of dispersion map and dissipation in thulium-doped fiber lasers. The existence of parabolic pulse as nonlinear attraction was proved and distinct pulse intensity profiles evolution from Gaussian shape to parabolic shape was proposed in dissipative dispersion-managed thulium-doped fiber lasers.

5.
Opt Express ; 22(23): 28383-9, 2014 Nov 17.
Article in English | MEDLINE | ID: mdl-25402080

ABSTRACT

We demonstrated a 2147 nm silica-based Raman fiber amplifier with output power of 14.3 W directly pumped with a 1963 nm CW thulium-doped all-fiber MOPA. The 1963 nm thulium-doped all-fiber MOPA is seeded with a 2147 nm thulium-doped all-fiber laser at the same time. The Raman Stokes power shift from 1963 nm to 2147 nm is accomplished in a piece of 50 m silica-based highly nonlinear fiber (HNLF). The conversion efficiency was 38.5% from 1963 nm to 2147 nm in the HNLF. The output power achieved was only currently limited by available 1963 nm input power and the architecture has significant scaling potential. To the best of our knowledge, this is the highest power operation of a Raman fiber amplifier at >2 µm wavelength region.


Subject(s)
Amplifiers, Electronic , Computer-Aided Design , Fiber Optic Technology/instrumentation , Lasers, Solid-State , Silicon Dioxide , Equipment Design
6.
Opt Express ; 22(20): 24384-91, 2014 Oct 06.
Article in English | MEDLINE | ID: mdl-25322014

ABSTRACT

We report high power mid-infrared (mid-IR) supercontinuum (SC) generation in a single-mode ZBLAN (ZrF4-BaF2-LaF3-AlF3-NaF) fiber with up to 21.8 W average output power from 1.9 to beyond 3.8 µm pumped by amplified picosecond pulses from a single-mode thulium-doped fiber (TDF) master oscillator power amplifier (MOPA). The optical-optical conversion efficiency from the 793 nm pump laser of the last stage thulium-doped fiber amplifier (TDFA) to mid-IR SC output is 17%. It is, to the best of our knowledge, the highest average power mid-IR SC generation from a ZBLAN fiber to date.

7.
Opt Lett ; 38(20): 4150-3, 2013 Oct 15.
Article in English | MEDLINE | ID: mdl-24321946

ABSTRACT

We demonstrate a high-power, picosecond, thulium-doped, all-fiber master oscillator power amplifier with average power of 120.4 W. The compact fiber oscillator is carefully designed with high repetition rate for the purpose of overcoming the detrimental effects of fiber nonlinearity in the later fiber amplifiers. The pulse duration of 16 ps at 333.75 MHz repetition rate results in a peak power of 22.5 kW in the final fiber power amplifier. To the best of our knowledge, this is the first demonstration of average power exceeding 100 W from an ultrashort pulse laser at 2 µm wavelength. On the other hand, by decreasing the fiber oscillator repetition rate and pulse duration for enhancing the fiber nonlinearity effects, we also demonstrate a high-power supercontinuum source with average power of 36 W from 1.95 µm to beyond 2.4 µm in the final fiber power amplifier.

8.
Opt Express ; 20(21): 23653-8, 2012 Oct 08.
Article in English | MEDLINE | ID: mdl-23188330

ABSTRACT

We demonstrated dissipative soliton obtained from a graphene oxide mode-locked Er-doped fiber laser, which operated in normal dispersion cavity by employing the dispersion compensation fiber. The highly chirped pulses at the repetition rate of 19.5 MHz can be compressed from 11 ps to 542 fs by using single mode fiber. Numerical simulations were in good agreement with the experimental results. The hydrophilic graphene oxide with easier fabrication shows great potential to be a novel low-cost saturable absorber in reliable and compact mode-locked fiber laser system.


Subject(s)
Fiber Optic Technology/instrumentation , Graphite/chemistry , Lasers, Solid-State , Oxides/chemistry , Energy Transfer , Equipment Design , Equipment Failure Analysis
SELECTION OF CITATIONS
SEARCH DETAIL
...