Facile ultrathin film of silver nanoparticles for bacteria sensing.

Silver nanoparticles (AgNPs) exhibit excellent anti-microbial and bactericidal properties. Due to bacterial abhorrence for AgNPs, it is difficult to develop a label-free, sensitive and low-cost bacteria sensor using them. In the present article, we report that an ultrathin and uniform Langmuir-Schaefer (LS) film of AgNPs can be employed for bacteria sensing effectively as compared to that of non-uniform and randomly distributed AgNPs in spin coated film. The uniformly distributed AgNPs in the LS film offer a relatively larger contact surface for bacteria as compared to that of spin coated film. Due to higher contact surface, adsorption of the bacteria on LS film is strongly preferable as compared to that of spin coated film leading to an enhanced sensing performance of the LS film than that of spin coated film. Soil bacteria was grown by the standard protocol and were utilized as model system for bacteria sensing application. The soil bacteria sensing was done by monitoring the piezoresponse and dissipation parameters using a quartz crystal microbalance, simultaneously. Our study indicates that the LS film of AgNPs not only facilitates the adsorption of the soil bacteria but also kills them.

Eruption disturbances of the maxillary incisors: a literature review.

Eruption disturbances can be broadly classified as disturbances related to time and disturbances related to position. Time related disturbances include premature eruption, delayed eruption or impactions. A common feature of these is a significant deviation in eruption time within the established norms for a particular age, sex, race or ethnicity. Although root development represents the fundamental biologic parameter for tooth eruption, chronological age at presentation is used as the first criteria in the establishment of the diagnosis of prematurity or a delay in eruption. Eruption disturbances related to position include ectopic eruption and transpositions. Positional deviations too can cause a delay in eruption time, however more commonly the involved tooth erupts within the expected time frame with an abnormality in position. The focus of this paper is to present a systematic review of the literature including classification, etiology and treatment modalities available for eruption disturbances of the maxillary incisors.

Surgically assisted rapid palatal expansion: a literature review.

Transverse maxillomandibular discrepancies are a major component of several malocclusions. Orthopedic and orthodontic forces are used routinely to correct a maxillary transverse deficiency (MTD) in a young patient. Correction of MTD in a skeletally mature patient is more challenging because of changes in the osseous articulations of the maxilla with the adjoining bones. Surgically assisted rapid palatal expansion (SARPE) has gradually gained popularity as a treatment option to correct MTD. It allows clinicians to achieve effective maxillary expansion in a skeletally mature patient. The use of SARPE to treat MTD decreases unwanted effects of orthopedic or orthodontic expansion. Our aim in this article is to present a comprehensive review of the literature, including indications, diagnosis, guidelines for case selection, a brief overview of the surgical techniques, orthodontic considerations, complications, risks, and limitations of SARPE to better aid the clinician in the management of MTD in skeletally mature patients.

Deactivation force-deflection behavior of multistranded stainless steel wires.

This investigation measured the deactivation (unloading) force-deflection behavior of selected multistranded stainless steel orthodontic wires. The guidelines from the revised American National Standards Institute/American Dental Association Specification No. 32 for orthodontic wires (type 2, nonlinear elasticity) were used to perform a 3-point bending test to obtain data for the deactivation force levels at 3, 2, 1, and 0.5 mm, and permanent deformation values. The study tested 20 wire designs: triple-stranded twisted wires, 5- and 6-stranded coaxial wires, and 8- and 9-stranded braided rectangular wires of selected cross-sections. Twenty specimens were tested for each wire design. The specification guidelines for testing provided a means for obtaining comparative unloading force delivery data for the deflections tested. Multistranded wires of significantly different cross-section, weave, and strand number fell within relatively narrow ranges of force delivery at the 0.5-mm (1.7-42.7 grams-force [gmf]) and 1-mm (31.1-134.2 gmf) deflections and wider ranges of force levels at the 2-mm (57.0-320.5 gmf) and 3-mm (72.5-451.8 gmf) deflections. All wires exhibited some permanent deformation, but none averaged greater than 0.66 mm. The testing also showed that multistranded wires of significantly different design exhibit similar force levels. The guidelines of the revised Specification No. 32 yielded deactivation data with regard to force delivery and provided comparisons of the wire designs tested.