Four-in-one multifunctional self-driven photoelectrocatalytic system for water purification: Organics degradation, U(VI) reduction, electricity generation and disinfection against bacteria.

This study addresses the energy-intensive nature of conventional wastewater treatment processes and proposes a solution through the development of a green, low-energy, and multifunctional wastewater treatment technology. The research focuses on a multifunctional self-driven photoelectrocatalytic (PEC) system, exploring its four-in-one applications in eliminating organic pollutants, reducing U(VI), generating electrical energy, and disinfecting pathogenic microorganisms. A TiO2-decorated carbon felt (CF@TiO2) cathode is synthesized to enhance interfacial charge transfer, with TiO2 coating improving surface binding sites (edge TiO and adsorbed -OH) for UO22+ adsorption and reduction. The self-driven PEC system, illuminated solely with simulated sunlight, exhibits remarkable efficiency in removing nearly 100 % of uranium within 0.5 h and simultaneously degrading 99.9 % of sulfamethoxazole (SMX) within 1.5 h, all while generating a maximum power output density (Pmax) of approximately 1065 µW·cm-2. The system demonstrates significant anti-interference properties across a wide pH range and coexisting ions. Moreover, 49.4 % of the fixed uranium on the cathode is reduced into U(IV) species, limiting its migration. The self-driven PEC system also excels in detoxifying various toxic organic compounds, including tetracycline, chlortetracycline, and oxytetracycline, and exhibits exceptional sterilization ability by disinfecting nearly 100 % of Escherichia coli within 0.5 h. This work presents an energy-saving, sustainable, and easily recyclable wastewater purification system with four-in-one capabilities, relying solely on sunlight for operation.

A self-driven solar coupling system with TiO2@MXene cathode for effectively eliminating uranium and organics from complex wastewater accompanying with electricity generation.

The inevitable organic matters in radioactive wastewater and contaminated waters pose great challenge in uranium recycling by traditional techniques. Here, a self-driven solar coupling system (SSCS), which was assembled by a TiO2 @MXene/CF cathode and a monolithic photoanode, was proposed for synergistically recycling uranium and degrading organics from complex radioactive wastewater, combining with electricity production. The TiO2 @MXene/CF was prepared via a simple annealing process with in-situ derived TiO2 nanoparticles decorated Ti3C2 MXene coated on carbon felt (CF). Under sunlight illumination, the photoanode captured electrons of organics, and drove electrons to the TiO2 @MXene/CF, which exhibited an exceptional UO22+ adsorption and reduction capacity because TiO2 nanoparticles provided plenty of surface hydroxyl groups for UO22+ adsorption, and the unique two-dimensional MXene facilitated the charge transfer. The SSCS with TiO2 @MXene/CF removed almost 100% UO22+ and organics with rate constants of ∼21 and ∼6.9 times those of the system with CF, accompanying with excellent power output (∼1000 µW·cm-2). The fixed uranium on TiO2 @MXene/CF was effectively reduced into insoluble UO2 (91.1%), and no obvious decay was observed after 15 repeated uses. This study proposes a multi-functional and easy-operated way for remediating radioactive wastewater and contaminated waters, and gives valuable insights in designing cathode materials for uranium reduction.

Comparison of surgical and conservative treatment of Rockwood type-III acromioclavicular dislocation: A meta-analysis.

BACKGROUND: There is no consensus on the effects of surgical versus conservative treatment on Rockwood type-III dislocation of the acromioclavicular joint in general orthopedic practice. The objective of this meta-analysis was to compare the clinical outcomes of patients managed surgically and conservatively following type-III acromioclavicular (AC) dislocation. METHODS: The Cochrane Library, EMBASE, MEDLINE via Ovid SP, and PubMed databases were searched for randomized controlled trials and observational studies. Patient data were pooled using standard meta-analytic approaches. For continuous variables, the weighted mean difference was used. For dichotomous data, the odds ratio was calculated. RESULTS: The current analysis included 10 trials on this topic, and the results demonstrated that there were no significant differences between surgical and conservative treatment in terms of pain, weakness, tenderness, post-traumatic arthritis, restriction of strength, unsatisfactory function, and scores (Constant, UCLA, Imatani, SST, DASH, Larsen). Analyses of ossification of the coracoclavicular ligament (OR = 1.62, 95% CI = 1.01-2.61) and osteolysis of the lateral clavicle (OR = 2.87, 95% CI = 1.27-6.52) suggested better function with conservative treatment versus surgical treatment, but the latter was superior to conservative treatment with regard to loss of anatomic reduction. Only 1 study showed a higher acromioclavicular joint instability score for surgical management compared with conservative management (P < .00001). CONCLUSION: In the management of Rockwood type-III AC dislocation, conservative treatment is superior to surgical treatment. Nonoperative treatment results in a lower incidence of ossification of the coracoclavicular ligament and osteolysis of the lateral clavicle compared with operative treatment. However, there was no statistical difference between operative and nonoperative treatment in terms of clinical outcomes.

Truly anatomic coracoclavicular ligament reconstruction with 2 Endobutton devices for acute Rockwood type V acromioclavicular joint dislocations.

BACKGROUND: Truly anatomic coracoclavicular ligament reconstruction (TACCR) according to the original insertions is a creative new method for the treatment of severe acromioclavicular separation. This research analyzed the clinical and radiologic results of TACCR in 25 patients with at least 2-year follow-up. METHODS: The study enrolled 25 patients with Rockwood type V acromioclavicular joint dislocations who underwent TACCR using 2 Endobutton (Smith & Nephew Inc., Andover, MA, USA) devices from May 2013 to October 2015. Patients were assessed with clinical and radiologic follow-up at 3, 6, 12, 18, and 24 months postoperatively. The clinical assessments consisted of the visual analog scale and the Constant score. The radiographic evaluations were performed by measurements of the coracoclavicular distance. RESULTS: The mean follow-up was 34 ± 6.8 months (range, 24-48 months). The visual analog scale and Constant scores revealed significant advancements from 5 ± 0.9 (range, 4-7) and 45 ± 5.6 (range, 30-54) scores preoperatively to 0 ± 0.5 (range, 0-2) and 95 ± 2.9 (range, 91-98) scores at 24 months postoperatively, respectively. The coracoclavicular distance significantly decreased from 23 ± 5.4 mm (range, 16-34 mm) preoperatively to 8 ± 0.9 mm (range, 7-10 mm) at the final follow-up. CONCLUSIONS: TACCR represents a safe, reliable and creative surgical technique that yields good to excellent clinical and radiologic outcomes in the treatment of severe acromioclavicular separation.

Changes of cervical sagittal alignments during motions in patients with cervical kyphosis.

Changes of cervical sagittal alignment during motion in cervical kyphosis patients have never been published before. This study was to investigate the changes and provide a better reference for orthopedic treatment.Randomized double-blind repeat trial was carried out on 60 patients with cervical kyphosis. On standard position, hyper flexion, and hyper extension sagittal radiographs, the following measurements were made: the C2-7 vertebral body spatial alignment angle (∠A), C2-7 vertebral lower terminal lamina tilt angle (∠B), C2/3 to C6/7 segmental intervertebral space angle (∠C), the distance from the posterior edge of odontoid to C7 vertebral body (D value), and the difference of angle A, B, and C between cervical flexion and extension movement. Another 60 healthy volunteers were enrolled, of whom the cervical curve apex was determined using Borden's method to compare change and distribution characteristics to patients with cervical kyphosis and C value.In standard lateral position, ∠A was positive and increased from C2 to C7. In hyper extension position, ∠A decreased with reducing amplitude from C2 to C7 compared with the standard position, whereas in hyper flexion position, the average value of ∠A increased with decreasing amplitude from C2 to C7. ∠B followed similar change regularities as ∠A with a larger mean value. In cervical flexion and extension movement, ∠A change of upper vertebral body (∠D) was almost equal to ∠A change of lower vertebral body and ∠C change between the adjacent 2 vertebral bodies (∠E). The curve apex distribution was almost between C4 and C5 in cervical kyphosis patients. A significant difference was observed between cervical kyphosis patients and normal people in C value and D value.The correction of the cervical kyphosis can be carried out from the apex of the cervical spine that provides a solid theoretical foundation for the correction of the cervical kyphosis.