Heterogeneous sapphire-supported low-loss photonic platform.

Sapphire is a promising wideband substrate material for visible photonics. It is a common growth substrate for III-nitride light-emitting diodes and laser structures. Doped sapphires are important gain media foundational to the development of titanium-sapphire and ruby lasers. For lasers operating at visible and near-infrared wavelengths, a photonic platform that minimizes loss while maximizing gain material overlap is crucial. Here, we introduce a novel low-loss waveguiding strategy that establishes high-performance integrated photonics on sapphire substrates. This platform achieves a high intrinsic quality factor of 5.6 million near 780 nm and features direct compatibility with a range of solid-state laser gain media.

Ultra-high Q alumina optical microresonators in the UV and blue bands.

UV and visible photonics enable applications ranging from spectroscopic sensing to communication and quantum information processing. Photonics structures in these wavelength regimes, however, tend to experience higher loss than their IR counterpart. Particularly in the near-UV band, on-chip optical microresonators have not yet achieved a quality factor beyond 1 million. Here, we report ultra-low-loss photonic waveguides and resonators patterned from alumina thin films prepared by a highly scalable atomic layer deposition process. We demonstrate ultra high Q factor of 1.5×106 at 390 nm, a record value at UV bands, and 1.9×106 at 488.5 nm.

Two-colour dissipative solitons and breathers in microresonator second-harmonic generation.

Frequency conversion of dissipative solitons associated with the generation of broadband optical frequency combs having a tooth spacing of hundreds of giga-hertz is a topical challenge holding the key to practical applications in precision spectroscopy and data processing. The work in this direction is underpinned by fundamental problems in nonlinear and quantum optics. Here, we present the dissipative two-colour bright-bright and dark-dark solitons in a quasi-phase-matched microresonator pumped for the second-harmonic generation in the near-infrared spectral range. We also found the breather states associated with the pulse front motion and collisions. The soliton regime is found to be typical in slightly phase-mismatched resonators, while the phase-matched ones reveal broader but incoherent spectra and higher-order harmonic generation. Soliton and breather effects reported here exist for the negative tilt of the resonance line, which is possible only via the dominant contribution of second-order nonlinearity.

Controlling single rare earth ion emission in an electro-optical nanocavity.

Rare earth emitters enable critical quantum resources including spin qubits, single photon sources, and quantum memories. Yet, probing of single ions remains challenging due to low emission rate of their intra-4f optical transitions. One feasible approach is through Purcell-enhanced emission in optical cavities. The ability to modulate cavity-ion coupling in real-time will further elevate the capacity of such systems. Here, we demonstrate direct control of single ion emission by embedding erbium dopants in an electro-optically active photonic crystal cavity patterned from thin-film lithium niobate. Purcell factor over 170 enables single ion detection, which is verified by second-order autocorrelation measurement. Dynamic control of emission rate is realized by leveraging electro-optic tuning of resonance frequency. Using this feature, storage, and retrieval of single ion excitation is further demonstrated, without perturbing the emission characteristics. These results promise new opportunities for controllable single-photon sources and efficient spin-photon interfaces.

Superconducting Cavity Electromechanics: The Realization of an Acoustic Frequency Comb at Microwave Frequencies.

We present a nonlinear multimode superconducting electroacoustic system, where the interplay between superconducting kinetic inductance and piezoelectric strong coupling establishes an effective Kerr nonlinearity among multiple acoustic modes at 10 GHz that could hardly be achieved via intrinsic mechanical nonlinearity. By exciting this multimode Kerr system with a single microwave tone, we further demonstrate a coherent electroacoustic frequency comb and provide theoretical understanding of multimode nonlinear interaction in the superstrong coupling limit. This nonlinear superconducting electroacoustic system sheds light on the active control of multimode resonator systems and offers an enabling platform for the dynamic study of microcombs at microwave frequencies.

Quadratic strong coupling in AlN Kerr cavity solitons.

Photonic platforms with χ(2) nonlinearity offer new degrees of freedom for Kerr frequency comb development. Here, we demonstrate Kerr soliton generation at 1550 nm with phase-matched quadratic coupling to the 775 nm harmonic band in a single AlN microring and thus the formation of dual-band mode-locked combs. In the strong quadratic coupling regime where the χ(2) phase-matching window overlaps the pump mode, the pump-to-harmonic-comb conversion efficiency is optimized. However, the strong quadratic coupling also drastically modifies the Kerr comb generation dynamics and decreases the probability of soliton generation. By engineering the χ(2) phase-matching wavelength, we are able to achieve a balance between high conversion efficiency and high soliton formation rate under the available pump power and microring quality factors. Our numerical simulations confirm the experimental observations. These findings provide guidance on tailoring single-cavity dual-band coherent comb sources.

Aluminum nitride nanophotonics for beyond-octave soliton microcomb generation and self-referencing.

Frequency microcombs, alternative to mode-locked laser and fiber combs, enable miniature rulers of light for applications including precision metrology, molecular fingerprinting and exoplanet discoveries. To enable frequency ruling functions, microcombs must be stabilized by locking their carrier-envelope offset frequency. So far, the microcomb stabilization remains compounded by the elaborate optics external to the chip, thus evading its scaling benefit. To address this challenge, here we demonstrate a nanophotonic chip solution based on aluminum nitride thin films, which simultaneously offer optical Kerr nonlinearity for generating octave soliton combs and quadratic nonlinearity for enabling heterodyne detection of the offset frequency. The agile dispersion control of crystalline aluminum nitride photonics permits high-fidelity generation of solitons with features including 1.5-octave spectral span, dual dispersive waves, and sub-terahertz repetition rates down to 220 gigahertz. These attractive characteristics, aided by on-chip phase-matched aluminum nitride waveguides, allow the full determination of the offset frequency. Our proof-of-principle demonstration represents an important milestone towards fully integrated self-locked microcombs for portable optical atomic clocks and frequency synthesizers.

Bidirectional interconversion of microwave and light with thin-film lithium niobate.

Superconducting cavity electro-optics presents a promising route to coherently convert microwave and optical photons and distribute quantum entanglement between superconducting circuits over long-distance. Strong Pockels nonlinearity and high-performance optical cavity are the prerequisites for high conversion efficiency. Thin-film lithium niobate (TFLN) offers these desired characteristics. Despite significant recent progresses, only unidirectional conversion with efficiencies on the order of 10-5 has been realized. In this article, we demonstrate the bidirectional electro-optic conversion in TFLN-superconductor hybrid system, with conversion efficiency improved by more than three orders of magnitude. Our air-clad device architecture boosts the sustainable intracavity pump power at cryogenic temperatures by suppressing the prominent photorefractive effect that limits cryogenic performance of TFLN, and reaches an efficiency of 1.02% (internal efficiency of 15.2%). This work firmly establishes the TFLN-superconductor hybrid EO system as a highly competitive transduction platform for future quantum network applications.

Photonic integration of Er3+:Y2SiO5 with thin-film lithium niobate by flip chip bonding.

Rare earth ions are known as promising candidates for building quantum light-matter interface. However, tunable photonic cavity access to rare earth ions in their desired host crystal remains challenging. Here, we demonstrate the integration of erbium doped yttrium orthosilicate (Er3+:Y2SiO5) with thin-film lithium niobate photonic circuit by plasma-activated direct flip chip bonding. Resonant coupling to erbium ions is realized by on-chip electro-optically tuned high Q lithium niobate micro-ring resonators. Fluorescence and absorption of erbium ions at 1536.48 nm are measured in the waveguides, while the collective ion-cavity cooperativity with micro-ring resonators is assessed to be 0.36. This work presents a versatile scheme for future rare earth ion integrated quantum devices.

Quantum Microwave Radiometry with a Superconducting Qubit.

The interaction of photons and coherent quantum systems can be employed to detect electromagnetic radiation with remarkable sensitivity. We introduce a quantum radiometer based on the photon-induced dephasing process of a superconducting qubit for sensing microwave radiation at the subunit photon level. Using this radiometer, we demonstrate the radiative cooling of a 1 K microwave resonator and measure its mode temperature with an uncertainty ∼0.01 K. We thus develop a precise tool for studying the thermodynamics of quantum microwave circuits, which provides new solutions for calibrating hybrid quantum systems and detecting candidate particles for dark matter.

Efficient Frequency Conversion in a Degenerate χ

Microresonators on a photonic chip could enhance nonlinear optics effects and thus are promising for realizing scalable high-efficiency frequency conversion devices. However, fulfilling phase matching conditions among multiple wavelengths remains a significant challenge. Here, we present a feasible scheme for degenerate sum-frequency conversion that only requires the two-mode phase matching condition. When the drive and the signal are both near resonance to the same telecom mode, an on-chip photon-number conversion efficiency up to 42% is achieved, showing a broad tuning bandwidth over 250 GHz. Furthermore, cascaded Pockels and Kerr nonlinear optical effects are observed, enabling the parametric amplification of the optical signal to distinct wavelengths in a single device. The scheme demonstrated in this Letter provides an alternative approach to realizing high-efficiency frequency conversion and is promising for future studies on communications, atom clocks, sensing, and imaging.

Noiseless photonic non-reciprocity via optically-induced magnetization.

The realization of optical non-reciprocity is crucial for many applications, and also of fundamental importance for manipulating and protecting the photons with desired time-reversal symmetry. Recently, various new mechanisms of magnetic-free non-reciprocity have been proposed and implemented, avoiding the limitation of the strong magnetic field imposed by the Faraday effect. However, due to the difficulties in separating the signal photons from the drive laser and the noise photons induced by the drive laser, these devices exhibit limited isolation performances and their quantum noise properties are rarely studied. Here, we demonstrate an approach of magnetic-free non-reciprocity by optically-induced magnetization in an atom ensemble. Excellent isolation (highest isolation ratio is [Formula: see text]) is observed over a power dynamic range of 7 orders of magnitude, with the noiseless property verified by quantum statistics measurements. The approach is applicable to other atoms and atom-like emitters, paving the way for future studies of integrated photonic non-reciprocal devices.

Mitigating photorefractive effect in thin-film lithium niobate microring resonators.

Thin-film lithium niobate is an attractive integrated photonics platform due to its low optical loss and favorable optical nonlinear and electro-optic properties. However, in applications such as second harmonic generation, frequency comb generation, and microwave-to-optics conversion, the device performance is strongly impeded by the photorefractive effect inherent in thin-film lithium niobate. In this paper, we show that the dielectric cladding on a lithium niobate microring resonator has a significant influence on the photorefractive effect. By removing the dielectric cladding layer, the photorefractive effect in lithium niobate ring resonators can be effectively mitigated. Our work presents a reliable approach to control the photorefractive effect on thin-film lithium niobate and will further advance the performance of integrated classical and quantum photonic devices based on thin-film lithium niobate.

Stable tuning of photorefractive microcavities using an auxiliary laser.

Cavity nonlinear optics enables intriguing physical phenomena to occur at micro- or nano-scales with modest input powers. While this enhances capabilities in applications such as comb generation, frequency conversion, and quantum optics, undesired nonlinear effects including photorefraction and thermal bistability are exacerbated. In this Letter, we propose and demonstrate a highly effective method of achieving cavity stabilization using an auxiliary laser for controlling photorefraction in a z-cut periodically poled lithium niobate (LN) microcavity system. Our numerical study accurately models the photorefractive effect under high input powers, guiding future analyses and development of LN microcavity systems.

Photorefraction-induced Bragg scattering in cryogenic lithium niobate ring resonators.

We report intracavity Bragg scattering induced by the photorefractive (PR) effect in high-Q lithium niobate ring resonators at cryogenic temperatures. We show that when a cavity mode is strongly excited, the PR effect imprints a long-lived periodic space-charge field. This residual field in turn creates a refractive index modulation pattern that dramatically enhances the back scattering of an incoming probe light, and results in selective and reconfigurable mode splittings. This PR-induced Bragg scattering effect, despite being undesired for many applications, could be utilized to enable optically programmable photonic components.

Photonic Dissipation Control for Kerr Soliton Generation in Strongly Raman-Active Media.

Microcavity solitons enable miniaturized coherent frequency comb sources. However, the formation of microcavity solitons can be disrupted by stimulated Raman scattering, particularly in the emerging crystalline microcomb materials with high Raman gain. Here, we propose and implement dissipation control-tailoring the energy dissipation of selected cavity modes-to purposely raise or lower the threshold of Raman lasing in a strongly Raman-active lithium niobate microring resonator and realize on-demand soliton mode locking or Raman lasing. Numerical simulations are carried out to confirm our analyses and agree well with experiment results. Our work demonstrates an effective approach to address strong stimulated Raman scattering for microcavity soliton generation.

Ultraviolet to mid-infrared supercontinuum generation in single-crystalline aluminum nitride waveguides.

We demonstrate ultrabroadband supercontinuum generation from ultraviolet to mid-infrared wavelengths in single-crystalline aluminum nitride waveguides. Tunable dispersive waves are observed at the mid-infrared regime by precisely controlling the waveguide widths. In addition, ultraviolet light is generated through cascaded second-harmonic generation in the modal phase-matched waveguides. Numerical simulation indicates a high degree of coherence of the generated spectrum at around the telecom pump and two dispersive waves. Our results establish a reliable path for multiple octave supercontinuum comb generation in single-crystalline aluminum nitride to enable applications including precision frequency metrology and spectroscopy.

Cavity piezo-mechanics for superconducting-nanophotonic quantum interface.

Hybrid quantum systems are essential for the realization of distributed quantum networks. In particular, piezo-mechanics operating at typical superconducting qubit frequencies features low thermal excitations, and offers an appealing platform to bridge superconducting quantum processors and optical telecommunication channels. However, integrating superconducting and optomechanical elements at cryogenic temperatures with sufficiently strong interactions remains a tremendous challenge. Here, we report an integrated superconducting cavity piezo-optomechanical platform where 10 GHz phonons are resonantly coupled with photons in a superconducting cavity and a nanophotonic cavity at the same time. Taking advantage of the large piezo-mechanical cooperativity (Cem ~7) and the enhanced optomechanical coupling boosted by a pulsed optical pump, we demonstrate coherent interactions at cryogenic temperatures via the observation of efficient microwave-optical photon conversion. This hybrid interface makes a substantial step towards quantum communication at large scale, as well as novel explorations in microwave-optical photon entanglement and quantum sensing mediated by gigahertz phonons.

All-optical thermal control for second-harmonic generation in an integrated microcavity.

Nonlinear optical effects in integrated microcavities have been studied extensively with the advantages of strong light-matter interaction, great scalability, and stability due to the small mode volume. However, the pump lasers stimulating nonlinear effects impose obstacles for practical applications, since the material absorption causes thermal resonance drift and instability. Here we experimentally demonstrate an all-optical control of the thermal behavior in optical microcavities for tunable doubly-resonant second-harmonic (SH) generation on an integrated photonic chip. Through an auxiliary control laser, the temperature of a selected microring can be efficiently changed, thus allowing precise frequency tuning of the doubly-resonant wavelength while eliminating the distortion of the lineshape induced by the thermo-optic effect. Although the phase-matching conditions will limit the tuning range of 55GHz, the technique is still potential to achieve a larger tuning range in combination with temperature regulation. Additionally, this approach has the advantage of quick reconfiguration, showing a fast modulation rate up to about 256 kHz. The theoretical model behind our experimental scheme is universal and applicable to other microcavity-enhanced nonlinear optical processes, and our work paves the way for controlling and utilizing the thermal effect in the applications of microcavities.

Widely separated optical Kerr parametric oscillation in AlN microrings.

Here, we report $ {\chi ^{(3)}} $χ(3)-based optical parametric oscillation (OPO) with widely separated signal-idler frequencies from crystalline aluminum nitride microrings pumped at $ 2\,\,\unicode{x00B5}{\rm m} $2µm. By tailoring the width of the microring, OPO reaching toward the telecom and mid-infrared bands with a frequency separation of 64.2 THz is achieved. While dispersion engineering through changing the microring width is capable of shifting the OPO sideband by $ \gt {9}\;{\rm THz}$>9THz, the OPO frequency can also be agilely tuned in the ranges of 1 and 0.1 THz, respectively, by shifting the pump wavelength and controlling the chip's temperature. At high pump powers, the OPO sidebands further evolve into localized frequency comb lines. Such large-frequency-shift OPO with flexible wavelength tunability will lead to enhanced chip-scale light sources.