Impacts of water activity on survival of Listeria innocua and Enterococcus faecium NRRL B-2354 in almonds during steam treatments.

Raw almonds have been associated with Salmonella outbreaks and multiple recalls related to Listeria monocytogenes contamination. While steam treatment has been approved for pasteurizing both conventional and organic whole almonds, there is limited understanding of how water activity (aw) influences the effectiveness of steam treatments in decontaminating almonds. Hence, this study aimed to assess and compare the efficacy of steam treatments against Listeria innocua and Enterococcus faecium NRRL B-2354, the known non-pathogenic surrogates, on almonds. It also sought to investigate the impact of almond's aw on bacterial resistance during steam treatments. Almond kernels were inoculated with ~8 log10 CFU/g of either E. faecium or L. innocua and equilibrated to aw 0.25 or 0.45 before being subjected to steam treatments at temperatures of 100-135 °C. Our results revealed that L. innocua exhibited lower resistance to steam compared to E. faecium, with 1.2-2.6 log10 CFU/g reductions for L. innocua and 1.0-2.0 log10 CFU/g reductions for E. faecium when the surface temperature of almonds reached 100-130 °C, depending on the aw of the almonds. The obtained DL. innocua, 100-130°C-values were 2.0-16.6 s, and DE. faecium, 100-130°C-values were 4.0-21.8 s, depending on the aw of almonds. In general, elevating steam temperatures and almond aw decreased the tolerance of L. innocua and E. faecium during steam inactivation. In addition, the z-values indicated that E. faecium on almonds was less sensitive to change in steam temperature compared to L. innocua, especially at lower aw. The zL. innocua-values were 36.6 °C and 35.7 °C, while zE. faecium-values were 48.9 °C and 42.7 °C in almonds with aw 0.25 and 0.45, respectively. Results from this study suggest that steam treatments serve as effective interventions for controlling pathogen contaminations in raw almonds.

Theoretical reasons for rapid heating of vegetable oils by microwaves.

Water and high-moisture foods are readily heated in microwaves due to their relatively high dielectric loss factors. Vegetable oil, on the other hand, has a much smaller loss factor (about 1/100th that of water), and is generally believed to be unsuitable for microwave heating. In this study, we conducted experiments to compare heating rates between vegetable oil and pure water in a 2450 MHz microwave oven. We found that the vegetable oil samples were heated rapidly in microwaves, and even faster (1.4-2.0 times) than the water samples. To provide a theoretical explanation, we developed a 3-D computer simulation model. The simulation revealed an approximately 10-fold stronger electric field in oil compared to water, resulting in a similar amount of microwave power being absorbed by the oil and water samples. As the absorbed microwave power was converted into thermal energy, the oil samples were heated faster due to their smaller specific heat (1/2 that of water). But we also found that when the dimensions of oil are smaller than half the microwave wavelength, oil is heated slower than water due to the absence of hot spot areas. This study provides a theoretical explanation for microwave heating of vegetable oils and demonstrates opportunities for utilizing microwave energy to electrify industrial heating of vegetable oils.

Survival and thermal resistance of Salmonella in chocolate products with different water activities.

Contamination of Salmonella in chocolate products has caused worldwide outbreaks and recalls. There is a lack of information on the impact of water activity (aw) on the stability of Salmonella in chocolate products during storage and thermal treatments. In this research, the survival and thermal resistance of a Salmonella cocktail (S. Enteritidis PT30, S. Tennessee K4643, S. Typhimurium S544) was examined in different chocolate products (dark chocolate, white chocolate, milk chocolate) at two aw levels (0.25, 0.50) over 12 months at 22 °C. A reduction of 4.19 log10 CFU/gof Salmonella was obtained in dark chocolate after 12 months (aw = 0.50, at 22 °C); less reductions were observed in white and milk chocolates. In all three products, more reductions were observed ataw = 0.50 than at aw = 0.25 over the 12-months storage. When treated at 80 °C, the D-values (time required to cause 1 log reduction) of the Salmonella cocktail in the chocolate samples with initial aw of 0.25 were 35.7, 25.2 and 11.6 min in dark, white and milk chocolate, respectively, before the storage. The D80°C -values of Salmonella cocktail in the samples with initial aw of 0.50 were 6.45, 7.46, and 3.98 min in dark, white and milk chocolate, respectively. After 12 months of storage at 22 °C, the D80°C-value of Salmonella cocktail decreased to 9.43 min (p < 0.05) in milk chocolate but remained 22.7 min in white chocolate with an aw of 0.25 at 22 °C. The data suggests that Salmonella can survive in chocolate products for up to 12 months, and its thermal resistance remained relatively stable. Thus, Salmonella is resistant to desiccation in chocolates, particularly in milk and white chocolates, and its thermal resistance remains during one-year storage, which could pose a potential threat for future outbreaks.

Preserving Ready-to-Eat Meals Using Microwave Technologies for Future Space Programs.

The crewed suborbital and space flights launched by private companies over the past three years have rejuvenated public interest in space travel, including space tourism. Ready-to-eat meals (MREs) are the main source of nutrients and energy for space travelers. It is critical that those meals are free of bacterial and viral pathogens and have adequate shelf life. The participation of private companies in space programs will create new opportunities and demand for high-quality and microbiologically safe MREs for future space travels. In this article, we provide a brief review of nutrition and energy requirements for human activities in space. We discuss the general thermal processing requirements for control of bacterial and viral pathogens in MREs and introduce advanced thermal preservation technologies based on microwaves for production of MREs with different shelf-lives under various storage conditions. We also present the latest advancements in the development of polymer packaging materials for quality preservation of thermally stabilized MREs over extended storage. Finally, we recommend future research on issues related to the sensory quality of specially formulated MREs, microbial safety of dried foods that complement high moisture MREs, and food package waste management in future space missions.

Recent developments in low-moisture foods: microbial validation studies of thermal pasteurization processes.

Outbreaks associated with low-moisture foods (e.g., wheat flour, nuts, and cereals) have urged the development of novel technologies and re-validation of legacy pasteurization process. For various thermal pasteurization processes, they share same scientific facts (e.g., bacterial heat resistance increased at reduced water activity) and guidelines. However, they also face specific challenges because of their different heat transfer mechanisms, processing conditions, or associated low-moisture foods' formulations. In this article, we first introduced the general structural for validating a thermal process and the shared basic information that would support our understanding of the key elements of each thermal process. Then, we reviewed the current progress of validation studies of 7 individual heating technologies (drying roasting, radiofrequency-assisted pasteurization, superheated steam, etc.) and the combined treatments (e.g., infrared and hot air). Last, we discussed knowledge gaps that require more scientific data in the future studies. We aimed to provide a process-centric view point of thermal pasteurization studies of low-moisture foods. The information could provide detailed protocol for process developers, operators, and managers to enhance low-moisture foods safety.

Reduction of Aspergillus flavus and aflatoxin on almond kernels using gaseous chlorine dioxide fumigation.

The almond industry suffers product losses caused by mold growth and toxin contamination. Gaseous chlorine dioxide (ClO2) has the potential for postharvest reduction of mycotoxic Aspergillus flavus. In this study, almonds inoculated with A. flavus were fumigated with gaseous ClO2 for 1, 2, 3, 8, 12, and 24 h using a dry precursor sachet batch method. The headspace concentration ranged from 0.5 to 2.4 mg/L, depending on initial dosing and time. At its highest concentration, gaseous ClO2 demonstrated an 84.4 % degradation efficiency of aflatoxin B1 (AFB1) with a reduction of 2.4 log CFU/g of A. flavus on almond kernels. Additionally, suppression of AFB1 continued after one-month storage at 4 °C. No significant oxidative effect and color difference (ΔE) was observed on the treated kernels. The almond industry can apply gaseous ClO2 technology to reduce mold contamination and product losses.

Listeria monocytogenes cross-contamination during apple waxing and subsequent survival under different storage conditions.

This study evaluated Listeria monocytogenes cross-contamination between inoculated fruits, waxing brush, and uninoculated fruits during apple wax coating and investigated the fate of L. monocytogenes on wax-coated apples introduced via different wax coating schemes. There were 1.8-1.9 log10 CFU/apple reductions of L. monocytogenes on PrimaFresh 360, PrimaFresh 606, or Shield-Brite AP-450 coated apples introduced before wax coating after 6 weeks of ambient storage (22 °C and ambient relative humidity). L. monocytogenes showed a similar trend (P > 0.05) on waxed apples under cold storage (1 °C and ∼ 90% relative humidity); there were 1.8-2.0 log10 CFU/apple reductions of L. monocytogenes during the 12 weeks of cold storage regardless of wax coating type. For cross-contamination study, a waxing brush was used to wax one inoculated apple (6.2 log10 CFU/apple); then, this brush was used to wax five uninoculated apples in a sequence. There were 3.7, 3.5, 3.3, 2.9, and 2.7 log10 CFU/apple and 3.6 log10 CFU/brush of L. monocytogenes transferred from the inoculated apple to uninoculated apple 1 to apple 5, and the waxing brush, respectively. The die-off rate of L. monocytogenes on wax-coated apples contaminated during wax coating was not significantly different from that contaminated on apples before wax coating, and 1.8-1.9 log10 CFU/apple reductions were observed during the 12 weeks of cold storage. The application of wax coatings, regardless of wax coating type, did not impact the survival of endogenous yeasts and molds on apples during ambient or cold storage. L. monocytogenes transferred onto waxing brushes during wax coating remained relatively stable during the 2-week ambient holding. Fungicide application during wax coating reduced (P < 0.05) yeast and mold counts but had a minor impact (P > 0.05) on the survival of L. monocytogenes on apples after 12 weeks of cold storage. Collectively, this study indicated that a high cross-contamination risk of L. monocytogenes during apple waxing, and L. monocytogenes on wax-coated apples introduced via different scenarios is stable during subsequent cold storage, highlighting the need for potential intervention strategies to control L. monocytogenes on wax-coated apples.

Equivalent processing for pasteurization of a pineapple juice-coconut milk blend by selected nonthermal technologies.

Identifying equivalent processing conditions is critical for the relevant comparison of food quality attributes. This study investigates equivalent processes for at least 5-log reduction of Escherichia coli and Listeria innocua in pineapple juice-coconut milk (PC) blends by high-pressure processing (HPP), pulsed electric fields (PEF), and ultrasound (US) either alone or combined with other preservation factors (pH, nisin, and/or heat). The two blends (pH 4 and 5) and coconut milk (pH 7) as a reference were subjected to HPP at 300-600 MPa, 20°C for 0.5-30 min; PEF at an electric field strength of 10-21 kV/cm, 40°C for 24 µs; and US at 120 µm amplitude, 25 or 45°C for 6 or 10 min. At least a 5-log reduction of E. coli was achieved at pH 4 by HPP at 400 MPa, 20°C for 1 min; PEF at 21 kV/cm, 235 Hz, 40°C for 24 µs; and US at 120 µm, 45°C for 6 min. As L. innocua showed greater resistance, a synergistic lethal effect was provided at pH 4 by HPP with 75 ppm nisin at 600 MPa, 20°C for 5 min; PEF with 50 ppm nisin at 18 kV/cm, 588 Hz, 40°C for 24 µs; and US at 45°C, 120 µm for 10 min. The total soluble solids (11.2-12.4°Bx), acidity (0.47%-0.51% citric acid), pH (3.91-4.16), and viscosity (3.55 × 10-3 -4.0 × 10-3  Pa s) were not significantly affected under the identified equivalent conditions. HPP was superior to PEF and US, achieving higher ascorbic acid retention and lower color difference in PC blend compared to the untreated sample.

Inactivation of Salmonella Enteritidis PT30 on black peppercorns in thermal treatments with controlled relative humidities.

Traditional method utilizes steam to pasteurize low-moisture ingredients like black peppercorns and almonds. Exposure to steam results in direct condensation on the product, unfavorable for a broader range of food ingredients such as dried herbs, fruits, and ground materials. Recent studies on the thermal inactivation of Salmonella in low-moisture foods suggest that the relative humidity in treatment chambers is an important factor, besides temperature, that determines the death rate of bacteria. Thus, thermal treatments with controlled high relative humidity can be an effective method to replace steam pasteurization. No condensation will occur when the products are preheated to above the dew-point temperature of the hot air in the treatment chamber, thus eliminating the need for post-treatment drying. To prove this concept, a special device was developed that preheated samples in a dry environment before exposing them to a controlled relative humidity (RH) at a high temperature. Using this device, the death rate of Salmonella Enteritidis PT30 (S. Enteritidis) in black peppercorns was determined at 80 °C and three different RH levels (60, 70, or 80 %) after the innoculated samples were heated to 78oC. The results indicate that the treatments at 80 °C and 80 % RH for 3 min, 70 % RH for 9 min, and 60 % RH for 25 min caused 5.4 ± 0.2, 6.2 ± 0.6, and 6.1 ± 1.0 log reductions, respectively. No condensation was observed on all of the treated samples. The moisture content (wet basis) of fully pasteurized (5-log reduction) black peppercorns at 60, 70, and 80 %RH reduced from 9.7 ± 0.4 % (untreated) to 8.7 ± 0.5 %, 9.2 ± 0.4 %, and 9.2 ± 0.2 %, respectively, indicating that post-drying is not required after the treatments. This study demonstrated the potential of using short-time high-RH treatments to control pathogens in low-moisture foods without the need for post-treatment drying.

High-pressure pasteurization of low-acid chilled ready-to-eat food.

The working population growth have created greater consumer demand for ready-to-eat (RTE) foods. Pasteurization is one of the most common preservation methods for commercial production of low-acid RTE cold-chain products. Proper selection of a pasteurization method plays an important role not only in ensuring microbial safety but also in maintaining food quality during storage. Better retention of flavor, color, appearance, and nutritional value of RTE products is one of the reasons for the food industry to adopt novel technologies such as high-pressure processing (HPP) as a substitute or complementary technology for thermal pasteurization. HPP has been used industrially for the pasteurization of high-acid RTE products. Yet, this method is not commonly used for pasteurization of low-acid RTE food products, due primarily to the need of additional heating to thermally inactivate spores, coupled with relatively long treatment times resulting in high processing costs. Practical Application: Food companies would like to adopt novel technologies such as HPP instead of using conventional thermal processes, yet there is a lack of information on spoilage and the shelf-life of pasteurized low-acid RTE foods (by different novel pasteurization methods including HPP) in cold storage. This article provides an overview of the microbial concerns and related regulatory guidelines for the pasteurization of low-acid RTE foods and summarizes the effects of HPP in terms of microbiology (both pathogens and spoilage microorganisms), quality, and shelf-life on low-acid RTE foods. This review also includes the most recent research articles regarding a comparison between HPP pasteurization and thermal pasteurization treatments and the limitations of HPP for low-acid chilled RTE foods.

Microwave frying and post-frying of French fries.

French fries are popular items in the diets of many countries, but the high oil content is a major health concern for consumers. Numerous novel frying techniques have been explored by the fast food service industry and the research community to address such concern. This research aimed to study the influence of microwave heating at two frequencies (2.45 and 5.85 GHz), both individually or in combination, in frying and post-frying on oil reduction in French fries. Results showed that microwave frying reduced the frying time by 30 - 40%, with equivalent product quality attributes in terms of oil content, color, and texture, as compared to deep-oil frying. Oil intake increased with increasing moisture loss during frying, regardless of the frying methods. Post-frying condition was the key to oil reduction. Specifically, a 60 s microwave heating after frying reduced the oil content by 18 - 23%. Compared to 2.45 GHz, microwaves at 5.85 GHz could produce French fries with significantly lower oil content (p ≤ 0.05) and better quality attributes such as color and texture. This study demosntrated the potential of microwave heating in production of deep-fried French fries with lower oil content and better quality.

Food Handling Practices for Apple Drying in Home Kitchens in the United States: A Survey.

ABSTRACT: Fruit drying has traditionally received little food safety attention in spite of Salmonella outbreaks and recalls involving low-moisture foods. This study was conducted to assess the food safety implications during the home drying process, with dried apples as an example. A cohort of home apple dryers (n = 979) participated in an online survey through Qualtrics XM in May 2021. The results showed that participants' knowledge of safe food handling practices regarding dried fruit was low. On average, participants used only 8 of 18 identified food safety practices during apple drying. The survey revealed inadequate frequency of hand washing during apple preparation, potential points of cross-contamination from kitchen tools, lack of hurdle technology without a pretreatment step, failure to incorporate a thermal kill step during drying, and a lack of objective measurements to ensure that target parameters are attained. Participants mainly pretreated apples for sensory improvement instead of microbial reduction. When presented with some benefits of pretreatment, participants who did not pretreat their apples considered doing so to kill bacteria. The use of safe food handling practices differed within demographic groups. Participants 18 to 39 years old (mean = 7.47; 95% confidence interval [CI] = 7.26, 7.67) and 40 to 59 years old (mean = 7.43; 95% CI = 7.16, 7.70) reported using fewer safe practices than did those >60 years old (mean = 8.49; 95% CI = 8.22, 8.75), and participants who identified as male (mean = 7.38; 95% CI = 7.16, 7.60) reported using fewer safe practices than did those identifying as female (mean = 7.92; 95% CI = 7.74, 8.11). The findings of this study provide food handling data to support the development of more accurate food safety risk assessment models and to guide the development of food safety education for consumers who dehydrate produce in the home.

Interlaboratory Evaluation of Enterococcus faecium NRRL B-2354 as a Salmonella Surrogate for Validating Thermal Treatment of Multiple Low-Moisture Foods.

ABSTRACT: This multi-institutional study assessed the efficacy of Enterococcus faecium NRRL B-2354 as a nonpathogenic Salmonella surrogate for thermal processing of nonfat dry milk powder, peanut butter, almond meal, wheat flour, ground black pepper, and date paste. Each product was analyzed by two laboratories (five independent laboratories total), with the lead laboratory inoculating (E. faecium or a five-strain Salmonella enterica serovar cocktail of Agona, Reading, Tennessee, Mbandaka, and Montevideo) and equilibrating the product to the target water activity before shipping. Both laboratories subjected samples to three isothermal treatments (between 65 and 100°C). A log-linear and Bigelow model was fit to survivor data via one-step regression. On the basis of D80°C values estimated from the combined model, E. faecium was more thermally resistant (P < 0.05) than Salmonella in nonfat dry milk powder (DEf-80°C, 100.2 ± 5.8 min; DSal-80°C, 28.9 ± 1.0 min), peanut butter (DEf-80°C, 133.5 ± 3.1 min; DSal-80°C, 57.6 ± 1.5 min), almond meal (DEf-80°C, 34.2 ± 0.4 min; DSal-80°C, 26.1 ± 0.2 min), ground black pepper (DEf-80°C, 3.2 ± 0.8 min; DSal-80°C, 1.5 ± 0.1 min), and date paste (DEf-80°C, 1.5 ± 0.0 min; DSal-80°C, 0.5 ± 0.0 min). Although the combined laboratory D80°C for E. faecium was lower (P < 0.05) than for Salmonella in wheat flour (DEf-80°C, 9.4 ± 0.1 min; DSal-80°C, 10.1 ± 0.2 min), the difference was ∼7%. The zT values for Salmonella in all products and for E. faecium in milk powder, almond meal, and date paste were not different (P > 0.05) between laboratories. Therefore, this study demonstrated the impact of standardized methodologies on repeatability of microbial inactivation results. Overall, E. faecium NRRL B-2354 was more thermally resistant than Salmonella, which provides support for utilizing E. faecium as a surrogate for validating thermal processing of multiple low-moisture products. However, product composition should always be considered before making that decision.

Thermal death kinetics of Salmonella Enteritidis PT30 in peanut butter as influenced by water activity.

It has been a challenge in developing effective thermal pasteurization processes for foods with high-fat and low-moisture contents like peanut butter, due to a general lack of reliable data on thermal resistance of pathogens in those food matrices. Recent studies on low-moisture foods like wheat flour and almond flour suggest that temperature and water activity (at the process temperatures) are two key factors that influence thermal inactivation of bacteria. In this study, we measured high-temperature water activities of peanut butter of two moisture content (MC), 3.1% and 5.6% (dry basis), and investigated the thermal death kinetics of Salmonella enterica Enteritidis PT 30 (S. Enteritidis) in those samples at 70, 80, 90, and 100 °C. The results indicated that the water activity of peanut butter increased with increasing temperature, e.g., from 0.33 and 0.53 at 23 °C, up to 0.39 and 0.59 at 100 °C, respectively. The thermal death of S. Enteritidis in peanut butter followed the first-order kinetics. Overall, higher moisture content and a higher treatment temperature led to a smaller D-value (decimal reduction time of the survival population) of S. Enteritidis. The maximum D-value was 102.6 ± 15.2 min at MC 3.1% and 70 °C, and the minimum D-value was 0.3 min (predicted) at MC = 5.6% and 100 °C. The log D-value reduced linearly with temperature at a given aw, with Z-values equal to 15.4 °C (for MC = 3.1%) and 12.6 °C (for MC = 5.6%). Based on this study, the first-order kinetic model can be employed for developing and validating thermal pasteurization processes for peanut butter. The moisture content of peanut butter and the process temperature are two key parameters that need to be controlled for sufficient lethality.

Mass transfer enhancement of tuna brining with different NaCl concentrations assisted by ultrasound.

The influence of different NaCl concentrations (2.5, 5, 7.5 and 10% (w/w)) on the mass transfer kinetics of tuna during brining process with and without ultrasound assistance was evaluated. Results showed that an increase in NaCl concentration and the application of ultrasound accelerated the salt diffusion in the tuna muscle, and the highest yield was obtained in 5% brine concentration. Moreover, the kinetics parameters were significantly affected by the NaCl concentration and ultrasound application during brining. The values of the mass transfer kinetics parameters (k1, k2) for total and water weight changes decreased as NaCl concentration increased with and without ultrasound assistance during brining. In contrast, the higher the NaCl concentration, the higher the value of the salting kinetics parameters for salt weight changes. The application of ultrasound enhanced the salt effective diffusion coefficient (De) from 402.8% to 653.21% during the brining process, and the highest De was also found at 5% brine concentration. The application of ultrasound can improve the uniformity of salt distribution, enhance water holding capacity, reduce hardness and chewiness, but have no significant effect on color of tuna muscle.

Recent development in low-moisture foods: Microbial safety and thermal process.

Foodborne outbreaks and recalls of pathogen-contaminated low-moisture foods (LMFs, foods with water activity at 25 °C < 0.85) have led to numerous scientific studies on bacterial persistence, as well as newly developed industrial interventions. Conducting microbial tests of LMFs, lab tests, or validation studies in pilot plans requires complete information on protocols and parameters that need to be aware of-in particular, understanding how factors influence the thermal resistance of bacterial pathogen in LMFs is critical in designing any thermal processes. This review provides detailed information on the general protocols of microbial studies of LMFs: from pertinent pathogen identification to microbial validation studies. In particular, it reviewed the detailed procedures (e.g., lawn-harvest method), analytical protocols (e.g., recovery and enumeration of pathogens in LMFs), and specialized tools that have been utilized (even widely accepted) in laboratory-based microbial studies of LMFs. It also summarized the factors that influence the microbial validation studies. This article could support the intervention of existing pasteurization processes in the LMF industry, promoting the microbial safety of LMFs.

Water sorption characteristics of freeze-dried bacteria in low-moisture foods.

Water sorption isotherms of bacteria reflect the water activity with the change of moisture content of bacteria at a specific temperature. The temperature-dependency of water activity change can help to understand the thermal resistance of bacteria during a thermal process. Thermal resistance of bacteria in low-moisture foods may differ significantly depending on the physiological characteristics of microorganisms, including cell structure, existence of biofilms, and growth state. Previous studies demonstrated that the incremental change of aw in bacterial cells during thermal treatments resulted in changes in their thermotolerance. In this study, a pathogen associated with low-moisture foods outbreaks, Salmonella Enteritidis PT30 (in planktonic and biofilm forms), and its validated surrogate, Enterococcus faecium, were lyophilized and their water sorption isotherms (WSI) at 20, 40, and 60 °C were determined by using a vapor sorption analyzer and simulated by the Guggenheim, Anderson and De Boer model (GAB). The published thermal death times at 80 °C (D80 °C-values) of these bacteria in low-moisture environments were related with their WSI-derived aw changes. The results showed that planktonic E. faecium and biofilms of Salmonella, exhibiting higher thermal resistance compared to the planktonic cultures of Salmonella, had a smaller increase in aw when thermally treated from 20 to 60 °C in sealed test cells. The computational modeling also showed that when temperature increased from 20 to 60 °C, with an increase in relative humidity from 10% to 60%, freeze-dried planktonic E. faecium and Salmonella cells would equilibrate to their surrounding environments in 0.15 s and 0.25 s, respectively, suggesting a rapid equilibration of bacterial cells to their microenvironment. However, control of bacteria with different cell structure and growth state would require further attentions on process design adjustment because of their different water sorption characteristics.

A Review: Gaseous Interventions for Listeria monocytogenes Control in Fresh Apple Cold Storage.

Listeria monocytogenes (L. monocytogenes) causes an estimated 1600 foodborne illnesses and 260 deaths annually in the U.S. These outbreaks are a major concern for the apple industry since fresh produce cannot be treated with thermal technologies for pathogen control before human consumption. Recent caramel apple outbreaks indicate that the current non-thermal sanitizing protocol may not be sufficient for pathogen decontamination. Federal regulations provide guidance to apple processors on sanitizer residue limits, organic production, and good manufacturing practices (GMPs). However, optimal methods to control L. monocytogenes on fresh apples still need to be determined. This review discusses L. monocytogenes outbreaks associated with caramel apples and the pathogen's persistence in the environment. In addition, this review identifies and analyzes possible sources of contaminant for apples during cold storage and packing. Gaseous interventions are evaluated for their feasibility for L. monocytogenes decontamination on apples. For example, apple cold storage, which requires waterless interventions, may benefit from gaseous antimicrobials like chlorine dioxide (ClO2) and ozone (O3). In order to reduce the contamination risk during cold storage, significant research is still needed to develop effective methods to reduce microbial loads on fresh apples. This requires commercial-scale validation of gaseous interventions and intervention integration to the current existing apple cold storage. Additionally, the impact of the interventions on final apple quality should be taken into consideration. Therefore, this review intends to provide the apple industry suggestions to minimize the contamination risk of L. monocytogenes during cold storage and hence prevent outbreaks and reduce economic losses.

Consumer Acceptance of a Ready-to-Eat Meal during Storage as Evaluated with a Home-Use Test.

A home-use test (HUT) is one method that provides a measure of ecological validity as the product is consumed in home under common daily use circumstances. One product that benefits from being evaluated in-home are ready-to-eat (RTE) meals. This study determined consumer acceptance of microwave-thermally-pasteurized jambalaya, a multi-meat and vegetable dish from American Cajun cuisine, and a control (cooked frozen jambalaya) through an on-line home-use test (HUT) over a 12-week storage period. Paralleling the HUT, an online auction determined consumers' willingness to pay. The study also explored how the social environment may impact the liking of the meals when a partner of the participants joined the sensory evaluation of the meals. Consumers (n = 50) evaluated microwave-processed jambalaya stored at 2 °C and a control (cooked frozen jambalaya stored at -31 °C) after 2, 8 and 12 weeks of storage. Consumer liking of different sensory attributes was measured. Participants could choose to share the meals with a partner as a way to enhance ecological validity. The responses from 21 partners to the sensory-related questions were collected. After the sensory evaluation, the participants bid on the meal they had just sampled. Results showed that processing method (microwave vs. control) did not significantly influence the measured sensory attributes. Only flavor liking decreased over storage time (p < 0.05). The inclusion of partners significantly increased (p = 0.04) the liking of the appearance of the meals. The mean values of the bids for the meals ranged from $3.33-3.74, matching prices of commercially available jambalaya meals. This study found suggests that the shelf- life of microwave-processed meals could be extended up to 12 weeks without changing its overall liking. The study also shows the importance of exploring HUT methodology for the evaluation of consumers' acceptance of microwave-processed jambalaya and how including a partner could contribute to enhance ecological validity.

Does the order of presentation of extrinsic and intrinsic quality attributes matter when eliciting willingness to pay?

In this study, we estimate consumers' willingness to pay (WTP) for ready meals preserved using microwave assisted pasteurization systems (MAPS)-a novel pasteurization technology, compared to frozen, ready meals. We conducted a laboratory multi-round experimental auction for two samples of ready meal jambalaya in which appearance and sensory evaluation along with extrinsic information was sequentially disclosed to panelists. Our results suggest that when participants tasted the meals and formed an opinion from the meal itself, the liking of appearance and sensory attributes were the most impactful factors for participants' WTP regardless of other available extrinsic (name of the preservation technology and environmental impacts of each technology) attributes. The words "microwave" and "pasteurization" did not negatively impact the WTP. The order in which intrinsic and extrinsic attributes were evaluated and presented did not impact absolute WTP values, but the order did impact the weight of each attribute type on the WTP. PRACTICAL APPLICATION: The sensory perceptions had a larger effect than the name of the preservation technology and environmental impacts on the willingness to pay (WTP) for ready meals. The order of presented information to panelists did not impact absolute values of WTP. The words "microwave" and "pasteurization" did not have a negative effect on WTP.