Lithiation induced hetero-superlattice Zn/ZnLi as stable anode for aqueous zinc-ion batteries.

Three dimensional (3D) framework structure is one of the most effective ways to achieve uniform zinc deposition and thus inhibit the Zn dendrites growth in working Zn metallic anode. A major challenge facing for the most commonly used 3D zincophilic hosts is that the zincophilic layer tends to peel off during repeatedly cycling, making it less stable. Herein, for the first time, a hetero-superlattice Zn/ZnLi (HS-Zn/ZnLi) anode containing periodic arrangements of metallic Zn phase and zincophilic ZnLi phase at the nanoscale, is well designed and fabricated via electrochemical lithiation method. Based on binding energy and stripping energy calculation, and the operando optical observation of plating/stripping behaviors, the zincophilic ZnLi sites with a strong Zn adsorption ability in the interior of the 3D ZnLi framework structure can effectively guide uniform Zn nucleation and dendrite-free zinc deposition, which significantly improves the cycling stability of the HS-Zn/ZnLi alloy (over 2800 h without a short-circuit at 2 mA cm-2). More importantly, this strategy can be extended to HS-Zn/ZnNa and HS-Zn/ZnK anodes that are similar to the HS-Zn/ZnLi microstructure, also displaying significantly enhanced cycling performances in AZIBs. This study can provide a novel strategy to develop the dendrite-free metal anodes with stable cycling performance.

Retarded sodium alloying interface reaction for stable anode-less sodium metal batteries.

Improving the sodiophilicity of the substrate is essential to enhance the reversibility of anode-less sodium metal batteries. Here, we have prepared a sodiophilic nano-Pb coating on aluminum-based collectors by magnetron sputtering. The slow alloying kinetics between Pb and sodium allows prolonged Pb retention in the coating, endowing the coating with a durable sodiophilicity.

Regulating Pseudo-Graphitic Domain and Closed Pores to Facilitate Plateau Sodium Storage Capacity and Kinetics for Hard Carbon.

Hard carbon anode demonstrates exceptional potential in sodium-ion batteries due to their cost-effectivenss and superior plateau capacity. However, the proximity of the plateau capacity to the cut-off voltage of battery operation and the premature cut-off voltage response caused by polarization at high rates greatly limit the exploitation of plateau capacities, raising big concerns about inferior rate performance of high-plateau-capacity hard carbon. In this work, a facile pre-oxidation strategy is proposed for fabricating lignin-derived hard carbon. Both high-plateau capacity and sodiation kinetics are significantly enhanced due to the introduction of expanded pseudo-graphitic domains and high-speed closed pores. Impressively, the optimized hard carbon exhibits an increased reversible capacity from 252.1 to 302.0 mAh g-1, alongside superior rate performance (174.7 mAh g-1 at 5 C) and stable cyclability over 500 cycles. This study paves a low-cost and effective pathway to modulate the microstructure of biomass-derived hard carbon materials for facilitating plateau sodium storage kinetics.

Exceeding Three-Electron Reactions in Polyanionic Cathode To Achieve High-Energy Density for Sodium-Ion Batteries.

Activating multielectron reactions of sodium superionic conductor (NASICON)-type cathodes toward higher energy density remains imperative to boost their application feasibility. However, multisodium storage with high stability is difficult to achieve due to the sluggish reaction kinetics, irreversible phase transitions, and negative structural degradation. Herein, a kind of NASICON-type Na2.5V1.5Ti0.5(PO4)3/C (NVTP-0.5) hierarchical microsphere consisting of abundant primary nanoparticles is designed, realizing a reversible 3.2-electron reaction with high stability. The optimized NVTP-0.5 cathode demonstrates an ultrahigh discharge capacity of 192.42 mAh g-1, energy density of up to 497.3 Wh kg-1 at 20 mA g-1, and capacity retention ratio of 94.1% after 1000 cycles at 1 A g-1. Additionally, the NVTP-0.5 cathode delivers excellent tolerance to extreme temperatures while also achieving a high-energy density of 400 Wh kg-1 (based on the cathode mass) in a full-cell configuration. Systematic in situ/ex situ analysis results confirm the multisodium storage processes of NVTP-0.5 involving successive redox reactions (V2+/V3+, Ti3+/Ti4+, and V3+/V4+ redox couples) and reversible structure evolution (solid-solution and biphasic mechanisms), which contribute to the high capacity and excellent cycling stability. This work indicates that the rational regulation of components with different functions can unlock more possibilities for the development of NASICON-type cathodes.

Anion-Induced Uniform and Robust Cathode-Electrolyte Interphase for Layered Metal Oxide Cathodes of Sodium Ion Batteries.

Layer metal oxides demonstrate great commercial application potential in sodium-ion batteries, while their commercialization is extremely hampered by the unsatisfactory cycling performance caused by the irreversible phase transition and interfacial side reaction. Herein, trimethoxymethylsilane (TMSI) is introduced into electrolytes to construct an advanced cathode/electrolyte interphase by tuning the solvation structure of anions. It is found that due to the stronger interaction between ClO4- and TMSI than that of ClO4- and PC/FEC, the ClO4--TMSI complexes tend to accumulate on the surface of the cathode during the charging process, leading to the formation of a stable cathode/electrolyte interface (CEI). In addition, the Si species with excellent electronic insulation ability are distributed in the TMSI-derived CEI film, which is conducive to inhibiting the continuous side reaction of solvents and the growth of the CEI film. As a result, under a current density of 250 mA g-1, the capacity retention of the NaNi1/3Fe1/3Mn1/3O2 (NFM) cathode after 200 cycles in the TMSI-modified electrolyte is 74.4% in comparison to 51.5% of the bare electrolyte (1 M NaClO4/PC/5% FEC). Moreover, the NFM cathode shows better kinetics, with the specific discharge capacity increasing from 22 to 67 mAh g-1 at 300 mA g-1. It also demonstrates greatly improved rate capability, cycling stability, and Coulombic efficiency under various operating conditions, including high temperature (55 °C) and high cutoff voltage (2.0-4.3 V vs Na+/Na).

Thermally Healable Electrolyte-Electrode Interface for Sustainable Quasi-Solid Zinc-ion Batteries.

Quasi-solid zinc-ion batteries using hydrogel electrolytes show great potential in energy storage devices owing to their intrinsic safety, fewer side reactions and wide electrochemical windows. However, the dendrite issues on the zinc anodes cannot be fundamentally eliminated and the intrinsic anode-electrolyte interfacial interspace is rarely investigated. Here, we design a dynamically healable gelatin-based hydrogel electrolyte with a highly reversible sol-gel transition, which can construct a conformal electrode-electrolyte interface and further evolve into a stable solid-solid interface by in situ solidification. The unique helical gelatin chain structure provides a uniform channel for zinc ion transport by the bridging effect of sulfate groups. As a consequence, the dynamically healable interface enables dendrite-free zinc anodes and repeatedly repairs the anode-electrolyte interfacial interspaces by the reversible sol-gel transition of gelatin electrolyte to retain long-lasting protection for sustainable zinc-ion batteries.

Challenges and Strategies of Aluminum Anodes for High-Performance Aluminum-Air Batteries.

Aluminum-air battery (AAB) is a promising candidate for next-generation energy storage/conversion systems due to its cost-effectiveness and impressive theoretical energy density of 8100 Wh kg-1, surpassing that of lithium-ion batteries. Nonetheless, the practical applicability of AABs is hampered by the occurrence of serious self-corrosion side reactions and substantial capacity loss, resulting in suboptimal anode utilization. Consequently, improving the anode utilization to facilitate the construction of high-performance AABs have attracted widespread attention. Herein, the fundamentals and strategies to enhance aluminum anode utilization are reviewed from modifications of aluminum anodes and electrolytes. This comprehensive review may provide a scientific tool for the development of novel AABs in the future.

Revealing the closed pore formation of waste wood-derived hard carbon for advanced sodium-ion battery.

Although the closed pore structure plays a key role in contributing low-voltage plateau capacity of hard carbon anode for sodium-ion batteries, the formation mechanism of closed pores is still under debate. Here, we employ waste wood-derived hard carbon as a template to systematically establish the formation mechanisms of closed pores and their effect on sodium storage performance. We find that the high crystallinity cellulose in nature wood decomposes to long-range carbon layers as the wall of closed pore, and the amorphous component can hinder the graphitization of carbon layer and induce the crispation of long-range carbon layers. The optimized sample demonstrates a high reversible capacity of 430 mAh g-1 at 20 mA g-1 (plateau capacity of 293 mAh g-1 for the second cycle), as well as good rate and stable cycling performances (85.4% after 400 cycles at 500 mA g-1). Deep insights into the closed pore formation will greatly forward the rational design of hard carbon anode with high capacity.

Quasi-Solid-State Aluminum-Air Batteries with Ultra-high Energy Density and Uniform Aluminum Stripping Behavior.

Aqueous aluminum-air batteries are attracting considerable attention with high theoretical capacity, low-cost and high safety. However, lifespan and safety of the battery are still limited by the inevitable hydrogen evolution reaction on the metal aluminum anode and electrolyte leakage. Herein, for the first time, a clay-based quasi-solid-state electrolyte is proposed to address such issues, which has excellent compatibility and a liquid-like ionic conductivity. The clay with uniform pore channels facilitates aluminum ions uniform stripping and reduces the activity of free H2 O molecules by reconstructing hydrogen bonds network, thus suppressing the self-corrosion of aluminum anode. As a result, the fabricated aluminum-air battery achieves the highest energy density of 4.56 KWh kg-1 with liquid-like operating voltage of 1.65 V and outstanding specific capacity of 2765 mAh g-1 , superior to those reported aluminum-air batteries. The principle of constructing quasi-solid-state electrolyte using low-cost clay may further promote the commercialization of aluminum-air batteries and provide a new insight into electrolyte design for aqueous energy storage system.

Significantly Improving the Initial Coulombic Efficiency of TiO2 Anode for Sodium-Ion Batteries.

Titanium dioxide (TiO2) can serve as a candidate anode material for sodium-ion batteries (SIBs) with the merits of their low cost, abundance, and environment friendliness. However, its low initial Coulombic efficiency (ICE) and sluggish sodium-ion diffusion greatly limit its further practical applications. Herein, we report a one-step prepotassiation strategy to modify commercial TiO2 by a spontaneous chemical reaction using potassium naphthalene (K-Nt). Prepotassiation effectively compensates for the irreversible Na loss and induces a homogeneous, dense, and robust artificial solid electrolyte interphase (SEI) on its surface. The well-distributed artificial SEI suppresses the excessive electrolyte decomposition, contributing to rapid interfacial kinetics and stable Na+ insertion/extraction. Therefore, such modified commercial TiO2 anodes demonstrate significantly improved ICE (72.4%) and outstanding rate performance (176.4 mAh g-1 at 5 A g-1). This simple and efficient method for promoting ICEs and interfacial chemistry also demonstrates universality and practical value for other anodes in SIBs.

Bulk-Phase Reconstruction Enables Robust Zinc Metal Anodes for Aqueous Zinc-Ion Batteries.

Aqueous zinc-ion batteries are inherently safe, but the severe dendrite growth and corrosion reaction on zinc anodes greatly hinder their practical applications. Most of the strategies for zinc anode modification refer to the research of lithium metal anodes on surface regulation without considering the intrinsic mechanisms of zinc anode. Herein, we first point out that surface modification cannot permanently protect zinc anodes due to the unavoidable surface damage during the stripping process by solid-liquid conversion. A bulk-phase reconstruction strategy is proposed to introduce abundant zincophilic sites both on the surface and inside the commercial zinc foils. The bulk-phase reconstructed zinc foil anodes exhibit uniform surfaces with high zincophilicity even after deep stripping, significantly improving the resistance to dendrite growth and side reactions. Our proposed strategy suggests a promising direction for the development of dendrite-free metal anodes for practical rechargeable batteries with high sustainability.

Weak solvent chemistry enables stable aqueous zinc metal batteries over a wide temperature range from -50 to 80 °C.

The development of electrolytes with a wide temperature range, no dendrite growth and corrosion resistance is essential for the practical application of aqueous zinc metal batteries. Herein, γ-valerolactone is developed as the co-solvent to extend the operating temperature range of the aqueous electrolyte and stabilize the zinc metal anode interface. This weak solvent acts as a strong hydrogen bonding ligand and "diluent" to break the hydrogen bonds between free water molecules, thus enhancing the temperature tolerance and chemical stability of the electrolyte. The γ-valerolactone can also be adsorbed on the anode surface to achieve a dendrite-free zinc deposition behavior by promoting zinc nucleation and regulating zinc growth texture. The optimized electrolyte enables the symmetric cell to deliver a cycle/rest life of 2160 h and operate stably over a wide temperature range of -50 to 80 °C. The corresponding Zn||AC and Zn||PANI cells exhibit capacity retention of 92.5% and 85% after 8100 and 1600 cycles, respectively. This mechanism of weak solvent-regulated hydrogen bonding and solvent sheath provides new insights into the design of advanced aqueous electrolytes.

Robust and Wide Temperature-Range Zinc Metal Batteries with Unique Electrolyte and Substrate Design.

Rechargeable zinc metal batteries are promising for large-scale energy storage. However, their practical application is limited by harsh issues such as uncontrollable dendrite growth, low Coulombic efficiency, and poor temperature tolerance. Herein, a unique design strategy using γ-valerolactone-based electrolyte and nanocarbon-coated aluminum substrate was reported to solve the above problems. The electrolyte with extremely low freezing point and high thermal stability enables the symmetric cells with long cycle life over a wide temperature range (-50 °C to 80 °C) due to its ability to regulate zinc nucleation and preferential epitaxial growth. Besides, the nanocarbon-coated aluminum substrate can also promote a higher Coulombic efficiency over a wide temperature range in contrast to the low Coulombic efficiency of copper substrates with significant irreversible alloying reactions because this unique substrate with excellent chemical stabilization can homogenize the interfacial electron/ion distribution. The optimized zinc metal capacitors can operate stably under various temperature conditions (2000 cycles at 30 °C with 66 % depth of discharge and 1200 cycles at 80 °C with 50 % depth of discharge). This unique electrolyte and substrate design strategy achieves a robust zinc metal battery over a wide temperature range.

Regulating solvation and interface chemistry enables advanced aluminum-air batteries.

The main challenge for developing aqueous aluminum-air batteries with high mass-specific capacity depends on the inhibition of the parasitic hydrogen evolution reaction. Herein, a regulation strategy of solvation and interface chemistry has been proposed by introducing organic methylurea (MU) and inorganic stannous chloride (SnCl2) to the alkaline electrolyte, which can modulate the solvent structure and electrode/electrolyte interface and endow the aqueous aluminum-air battery with an outstanding mass-specific capacity of 2625 mA h g-1 at 50 mA cm-2.

Discovering the Intrinsic Causes of Dendrite Formation in Zinc Metal Anodes: Lattice Defects and Residual Stress.

Developing a highly stable and dendrite-free zinc anode is essential to the commercial application of zinc metal batteries. However, the understanding of zinc dendrites formation mechanism is still insufficient. Herein, for the first time, we discover that the interfacial heterogeneous deposition induced by lattice defects and epitaxial growth limited by residual stress are intrinsic and critical causes for zinc dendrite formation. Therefore, an annealing reconstruction strategy was proposed to eliminate lattice defects and stresses in zinc crystals, which achieve dense epitaxial electrodeposition of zinc anode. The as-prepared annealed zinc anodes exhibit dendrite-free morphology and enhanced electrochemical cycling stability. This work first proves that lattice defects and residual stresses are also very important factors for epitaxial electrodeposition of zinc in addition to crystal orientation, which can provide a new mechanism for future researches on zinc anode modification.

A Semi-solid Zinc Powder-based Slurry Anode for Advanced Aqueous Zinc-ion Batteries.

The booming of aqueous zinc-ion batteries (AZIBs) draws the researchers' attention to issues of zinc metal anodes, such as uncontrollable dendrite growth, corrosion, and volume effects. Zinc powder anode is more suitable for the industrial application of AZIBs than the widely used zinc foil anode due to its low cost, tunability and processability. However, the related solutions are rarely studied because the above issues of zinc metal anode are more serious in zinc powder anode. Herein, for the first time, we design a semi-solid zinc slurry anode consisting of zinc powder and zincophilic tin additive dispersed in a conductive elastic rheological network. Zinc can be deposited homogeneously on the dispersed tin particles, which avoids agglomerative zinc deposition and alleviates volume change during repeated zinc stripping/plating. Moreover, the practical application of the full cell with slurry is very promising since its operating life can be easily extended by facile slurry renewal.

Engineering Crystal Orientation of Cathode for Advanced Lithium-Ion Batteries: A Minireview.

Engineering crystal orientation has attracted widespread attention since it is related to the cyclability and rate performance of cathode materials for lithium-ion batteries (LIBs). Regulating the crystal directional growth with optimal exposed crystal facets is an effective strategy to improve the performance of cathode materials, but still lacks sufficient attention in research field. Herein, we briefly introduce the characterization techniques and identification methods for crystal facets, then summarize and illuminate the major methods for regulating crystal orientation and their internal mechanism. Furthermore, the optimization strategies for layered-, spinel-, and olivine-structure cathodes are discussed based on the characteristic of crystal structure, and the relationship between exposure of special crystal facets and lithium storage performance is deeply analyzed, which could guide the rational design of cathodes for LIBs.

Lithiophilic Sn-Co nano-seeds sealed in a hollow carbon shell to stabilize lithium metal anodes.

A lithiophilic Sn-Co nano-seed sealed in a nitrogen-doped carbon shell is designed to stabilize lithium metal anodes, in which lithiophilic alloys can regulate lithium deposition behavior and the hollow carbon shell is beneficial to prevent agglomeration. The modified lithium anode can be stable for 1350 h and 400 h under 1 mA cm-2 and 5 mA cm-2 in symmetric cells. The Sn-Co@C@Li||LiFePO4 full cell with a low N/P ratio of 2.12 shows a superior capacity retention of >98% over 250 cycles under 1C.

A high-capacity self-sacrificial additive based on electroactive sodiated carbonyl groups for sodium-ion batteries.

A new type of high-capacity sacrificial additive (Na4C6O6) is proposed to replenish the sodium loss in sodium ion full-cells. The HC//Na3V2(PO4)2F3 full-cells demonstrate significantly enhanced energy density after introducing an appropriate amount of additive.

Interfacial Reviving of the Degraded LiNi0.8 Co0.1 Mn0.1 O2 Cathode by LiPO3 Repair Strategy.

Nickel-rich cathode materials, owing to their high energy density and low cost, are considered to be one of the cathodes with the most potential in next-generation lithium-ion batteries. Unfortunately, this kind of cathode with highly active surface is easy to react with H2 O and CO2 when exposed to ambient air, resulting in the formation of lithium impurities and interfacial phase transition as well as deterioration of the electrochemical properties. In this work, the evolution mechanism of the structure and interface of LiNi0.8 Co0.1 Mn0.1 O2 during air-exposure is systematically investigated. Furthermore, a facile reviving strategy is proposed to restore the degraded LiNi0.8 Co0.1 Mn0.1 O2 by using LiPO3 as the repair agent. The lithium impurities on the surface of the degraded sample can transform into the repair/coating layer, and part of the rock salt phase on the subsurface can revive to layered phase after repair heat treatment. As a result, the optimized cathode delivers an initial discharge capacity of 198.3 mAh g-1 at 0.1C and a capacity retention of 85.5% after 50 cycles. Although slightly lower than the bare sample (201 mAh g-1 and 88%), they are obviously higher than the exposed samples (166.5 mAh g-1 and 40.4%). The regenerated electrochemical properties should be attributed to the multifunctional repair layer that can efficiently reduce the surface lithium impurities, prevent the corrosion of electrolyte, and improve the interfacial Li+ diffusion kinetics. This work can effectively reduce the waste of the degraded Ni-rich ternary materials and realize the transformation of "waste" into wealth.