ABSTRACT
Objectives: To study the design of nonmetallic crowns for deciduous molars by means of computer aided design and to analyze the key parameters of the nonmetallic crowns of deciduous molars using finite element method. Methods: The three-dimensional model of a mandibular second primary molar was constructed by using a micro-CT system. The thickness of the crown was limited to 0.5 mm and four different crown shapes (chamfer+anatomic, chamfer+non-anatomic, knife edge+anatomic and knife edge+non-anatomic) were designed. Then, the crown shape was limited as chamfer+non-anatomic and five different thicknesses of the crown (0.50, 0.75, 1.00, 1.25, 1.50 mm) were designed, and three different materials, including polyetherketoneketone (PEKK), polymethylmethacrylate (PMMA) resin and resin-infiltrated ceramic, were applied to make the crown. Stress distribution and fatigue of each component of the model under vertical and oblique loadings were analyzed by using finite element method. Non-axial retention analysis was performed on chamfer+non-anatomic crowns, made of PMMA resin, with thicknesses of 0.50, 0.75, 1.00, 1.25 and 1.50 mm. Results: Among the four crown shape designs, the chamfer+non-anatomic type crown showed the lowest von Mises stress and the highest safety factor. By comparing three different materials, the resin-infiltrated ceramic group showed obvious stress concentration on the buccal edge of the crown and the PEKK group showed stress concentration in the adhesive layer. Results of non-axial retention analysis showed that the torques required by the crowns with five thicknesses at the same rotation angle were as follows: 4 856.1, 4 038.1, 3 497.3, 3 256.3 and 3 074.3 Nâ m, respectively. The comparison of areas of the adhesives fracture among groups were as follows: 0.5 mm group < 0.75 mm group < 1.00 mm group < 1.25 mm group < 1.50 mm group. Conclusions: In the design of nonmetallic crowns for primary molars, the edge of the crown should be designed as chamfer, the shape of the inner crown should be non-anatomical and the minimum preparation amount of the occlusal surface should be 1.00 mm. Among the three materials, PMMA resin, of which elastic modulus is similar to the dentin and the dental adhesive, might be the most suitable material for the crowns of primary molars.
Subject(s)
Ceramics , Crowns , Dental Stress Analysis/methods , Finite Element Analysis , MolarABSTRACT
Objective: To record occlusal contact of primary dentition at maximal intercuspal position in children with individual normal occlusion. Methods: A total of 57 children were recruited from patients of the Department of Pediatric Dentistry, Peking University School and Hospital of Stomatology. Inclusion criteria were that the subjects were 3-5 years old with no visually detectable caries or pupal and periapical diseases, had complete primary dentition, had individual normal occlusion, had normal function of craniofacial system, were medically healthy, could cooperate with sampling and had obtained written informed consent from the parents or guardians. Finally, forty-seven children aged 3 to 5 years old were enrolled, including 24 males and 23 females. The age, height and weight of all subjects were (4.1±0.7) years old (ranging 3.0-5.8 years old), (103.7±7.2) cm (ranging 90-120 cm) and (17.1±2.5) kg (ranging 12.5-22.5 kg), respectively. Occlusal abilities such as occlusal contact area, average bite pressure, maximum bite pressure, maximum bite force and occlusal balance were measured with Dental Prescale â ¡ system. Results: Maximum bite force and occlusal contact area at intercuspal position in children with primary dentition were (567.40±223.84) N (ranging 226.7-1 154.6 N) and (18.56±6.54) mm2 (ranging 8.4-41.2 mm2), respectively. There was a significantly strong correlation between maximum bite force and occlusal contact area (r=0.954, P<0.01). Height and weight of children were also positively correlated with their maximum bite force (r=0.397, P=0.022 and r=0.453, P=0.008, respectively). Maximum occlusal bite force and contact occlusal area of boys [(651.80±224.34) N and (20.77±6.97) mm2] were significantly higher and larger than those of girls [(479.34±190.45) N and (16.25±5.27) mm2] (P<0.05). Thirty-two of all 47 children had one occlusal contact point with maximum bite pressure, mostly locating within the primary molar region. Bite forces of anterior and posterior teeth of primary dentition were (124.12±56.99) N and (450.11±205.09) N, respectively, about (21.82±11.40)% and (71.80±21.35)% of maximum bite force of the whole primary dentition. All of the occlusal balance points located in posterior teeth regions. Occlusal contacts were observed at both anterior and posterior teeth of primary dentition with individual normal occlusion. Conclusions: There was a great variation of maximum bite forces of primary dentitions at intercuspal position of children with individual normal occlusion. Maximum bite force of primary dentition was significantly correlated with occlusal contact area, height and weight of children. Occlusal contact points with maximum bite pressure and occlusal bite balance points of primary dentitions mostly located in primary molar regions.
Subject(s)
Bite Force , Dental Occlusion , Child , Child, Preschool , Female , Humans , Male , Molar , Tooth, DeciduousABSTRACT
An experiment was conducted to uncover the effects of increasing dietary grain levels on expression of thiamine transporters in ruminal epithelium, and to assess the protective effects of thiamine against high-grain-induced inflammation in dairy cows. Six rumen-fistulated, lactating Holstein dairy cows (627 ± 16.9 kg of body weight, 180 ± 6 d in milk; mean ± standard deviation) were randomly assigned to a replicated 3 × 3 Latin square design trial. Three treatments were control (20% dietary starch, dry matter basis), high-grain diet (HG, 33.2% dietary starch, DM basis), and HG diet supplemented with 180 mg of thiamine/kg of dry matter intake. On d 19 and 20 of each period, milk performance was measured. On d 21, ruminal pH, endotoxic lipopolysaccharide (LPS), and thiamine contents in rumen and blood, and plasma inflammatory cytokines were detected; a rumen papillae biopsy was taken on d 21 to determine the gene and protein expression of toll-like receptor 4 (TLR4) signaling pathways. The HG diet decreased ruminal pH (5.93 vs. 6.49), increased milk yield from 17.9 to 20.2 kg/d, and lowered milk fat and protein from 4.28 to 3.83%, and from 3.38 to 3.11%, respectively. The HG feeding reduced thiamine content in rumen (2.89 vs. 8.97 µg/L) and blood (11.66 vs. 17.63 µg/L), and the relative expression value of thiamine transporter-2 (0.37-fold) and mitochondrial thiamine pyrophosphate transporter (0.33-fold) was downregulated by HG feeding. The HG-fed cows exhibited higher endotoxin LPS in rumen fluid (134,380 vs. 11,815 endotoxin units/mL), and higher plasma concentrations of lipopolysaccharide binding protein and pro-inflammatory cytokines when compared with the control group. The gene and protein expression of tumor necrosis factor α (TNFα), IL1B, and IL6 in rumen epithelium increased when cows were fed the HG diet, indicating that local inflammation occurred. The depressions in ruminal pH, milk fat, and protein of HG-fed cows were reversed by thiamine supplementation. Thiamine supplementation increased thiamine contents in rumen and blood, and also upregulated the relative expression of thiamine transporters compared with the HG group. Thiamine supplementation decreased ruminal LPS (49,361 vs. 134,380 endotoxin units/mL) and attenuated the HG-induced inflammation response as indicated by a reduction in plasma IL6, and decreasing gene and protein expression of pro-inflammatory cytokines in rumen epithelium. Western bottling analysis showed that thiamine suppressed the protein expression of TLR4 and the phosphorylation of nuclear factor kappa B (NFκB) unit p65. In conclusion, HG feeding inhibits thiamine transporter expression in ruminal epithelium. Thiamine could attenuate the epithelial inflammation during high-grain feeding, and the protective effects may be due to its ability to suppress TLR4-mediated NFκB signaling pathways.
Subject(s)
Gastritis/veterinary , Membrane Transport Proteins/metabolism , Rumen/metabolism , Thiamine/administration & dosage , Thiamine/metabolism , Animals , Cattle , Diet , Epithelium/metabolism , Female , Fermentation , Hydrogen-Ion Concentration , Lactation , Milk/metabolismABSTRACT
Cell surface proteins can play important roles in cancer pathogenesis. Comprehensive understanding of the surface protein expression patterns of tumor cells and, consequently, the pathogenesis of tumor cells depends on molecular probes against these proteins. To be used effectively for tumor diagnosis, classification and therapy, such probes would be capable of specific binding to targeted tumor cells. Molecular aptamers, designer DNA-RNA probes, can address this challenge by recognizing proteins, peptides and other small molecules with high affinity and specificity. Through a process known as cell-based SELEX, we used live acute myeloid leukemia (AML) cells to select a group of DNA aptamers, which can recognize AML cells with dissociation constants (Kd's) in the nanomolar range. Interestingly, one aptamer (KH1C12) compared with two control cell lines (K562 and NB4) showed significant selectivity to the target AML cell line (HL60) and could recognize the target cells within a complex mixture of normal bone marrow aspirates. The other two aptamers KK1B10 and KK1D04 recognize targets associated with monocytic differentiation. Our studies show that the selected aptamers can be used as a molecular tool for further understanding surface protein expression patterns on tumor cells and thus providing a foundation for effective molecular analysis of leukemia and its subcategories.
Subject(s)
Antigens, Neoplasm/metabolism , Aptamers, Nucleotide , Leukemia, Myeloid, Acute/diagnosis , SELEX Aptamer Technique , Antigens, Surface/metabolism , Aptamers, Nucleotide/pharmacokinetics , Cell Line, Tumor , Humans , Leukemia, Myeloid, Acute/pathology , Molecular Probe Techniques , Protein Binding , Sensitivity and SpecificityABSTRACT
A series of experiments were conducted on guinea pigs to study the protective effect of hyperbaric oxygen (HBO) on hearing during chronic repeated noise exposure. A 1/3 octave band of noise centered at 1000 Hz was used (126 dB SPL, 1 h daily for 5 d; or 108 dB SPL, 1 h daily, 5 d/week for 4 weeks). Some groups of animals were treated with HBO (2-3 ATA, 1 h duration) before noise exposure. The results indicate that inhalation of HBO (every other day) can markedly reduce noise-induced threshold shift and relieve cochlear damage. The mechanism responsible for HBO protection against noise-induced hearing damage is discussed.
Subject(s)
Hearing Loss, Noise-Induced/prevention & control , Hyperbaric Oxygenation , Animals , Audiometry, Evoked Response , Auditory Threshold , Guinea Pigs , Hair Cells, Auditory/pathology , Hearing Loss, Noise-Induced/pathology , Hearing Loss, Noise-Induced/physiopathology , MaleABSTRACT
The projections from the dentate nucleus to the reticular formation of the brain stem in rabbit have been examined by means of the Fink-Heimer technique. The fibers arising from the dentate nucleus primarily project to the reticular formation via the contralateral and ipsilateral descending limbs of the brachium conjunctivum. The descending fibers project bilaterally to the parvocellular reticular nucleus, the ventral reticular nucleus, the gigantocellular reticular nucleus, the nucleus raphe magnus, the oral and caudal pontine reticular nuclei, and the reticulo-tegmental nucleus.
Subject(s)
Cerebellar Nuclei/ultrastructure , Nerve Fibers/ultrastructure , Rabbits/anatomy & histology , Reticular Formation/ultrastructure , Animals , Nerve Degeneration , Neural Pathways/ultrastructureABSTRACT
By retrograde transport of horseradish peroxidase the reticulocerebellar projections were examined in twenty-six rabbits. After injections in the cerebellum retrogradely labeled neurons were more numerous in the caudal reticular formation (ventral and gigantocellular reticular nuclei) than in its rostral part (caudal and oral pontine reticular nuclei). The labeled cells were of all sizes, large, medium-sized and small. Giant cells were labeled only after injections in the posterior lobe vermis. After injections in the anterior lobe, the posterior vermis, the fastigial nucleus and the flocculus, retrogradely labeled neurons were found bilaterally in the ventral reticular nucleus, the gigantocellular reticular nucleus and the caudal pontine reticular nucleus. Some cases with posterior vermal and fastigial injections in addition showed labeled neurons bilaterally in the oral pontine reticular nucleus. There were no major side differences. The cases with injections in the anterior part of the paramedian lobule gave rise to only a few labeled cells in the gigantocellular reticular nucleus. Negative findings were consistently made in the mesencephalic reticular formation.