Bimetallic Single Atom/Nanoparticle Ensemble for Efficient Photochemical Cascade Synthesis of Ethylene from Methane.

Light-driven photoredox catalysis presents a promising approach for the activation and conversion of methane (CH4) into high value-added chemicals under ambient conditions. However, the high C-H bond dissociation energy of CH4 and the absence of well-defined C-H activation sites on catalysts significantly limit the highly efficient conversion of CH4 toward multicarbon (C2+) hydrocarbons, particularly ethylene (C2H4). Herein, we demonstrate a bimetallic design of Ag nanoparticles (NPs) and Pd single atoms (SAs) on ZnO for the cascade conversion of CH4 into C2H4 with the highest production rate compared with previous works. Mechanistic studies reveal that the synergistic effect of Ag NPs and Pd SAs, upon effecting key bond-breaking and -forming events, lowers the overall energy barrier of the activation process of both CH4 and the resulting C2H6, constituting a truly synergistic catalytic system to facilitate the C2H4 generation. This work offers a novel perspective on the advancement of photocatalytic directional CH4 conversion toward high value-added C2+ hydrocarbons through the subtle design of bimetallic cascade catalyst strategy.

Frequency properties of channeled spectropolarimetry: an information theory perspective.

Channeled spectropolarimetry (CSP) has emerged as a notable technique due to its unique capacity to instantaneously measure either the polarization state of light or the Mueller matrix of a sample over a broad spectral range. Leveraging the quasi-linear relation between phase retardances of thick birefringent retarders and wavenumber, the target signal undergoes wavelength encoding. For the first time, we present a theoretical framework for the general CSP from a perspective of information theory. This framework comprehensively addresses the frequency properties of CSP, encompassing signal bandwidth, modulation frequency, sampling relationships, and filter window width during the demodulation process. Drawing from the frequency properties of CSP, we establish a theoretical foundation that informs the design of versatile CSPs and evaluates their measurement capabilities. Simulations for both Stokes CSP and Mueller CSP validate the efficacy of the proposed approach.

Performance Optimization of Ionic Polymer Sensors through Characteristic Regulation of Chemically Prepared Interfacial Electrodes.

Ionic polymer sensors (IPSs) have broad application prospects in health monitoring, environmental perception, and human-computer interaction. The performance of IPSs with chemically prepared electrodes is generally superior to that with physically prepared electrodes due to the area difference of the electric double layer (EDL), but the effects of the electrode characteristics prepared by chemical methods on the performance of IPSs have not been revealed. Therefore, in this paper, we studied the impact of the characteristics of chemically prepared electrodes on the performance of IPSs and realized the performance optimization of IPSs through electrode characteristic regulation. By controlling the matrix surface roughening, immersion reduction plating (IRP) cycles, and electroplating (EP) time, the sensing performances of IPS samples with different electrode interface roughnesses, electrode penetration depths, and surface resistances were investigated, respectively. The experimental results indicated that the response voltage of the IPS can be improved by increasing the electrode interface roughness and the electrode penetration depth and reducing the surface resistance. In addition, we have proven that the sensing performance of the IPS is determined by its intrinsic capacitance characteristics. Through coupling electrode characteristic regulations such as roughening and increasing IRP cycles and EP time, a high-performance IPS was obtained, and its response amplitude was improved by 237.8%. The obtained high-performance sensor has been applied in human motion detection, which has good potential to develop wearable devices with high stability for physiological activity monitoring.

Effect of Initial Crack Position on Crack Propagation Behaviors of Heavy-Duty Transmission Gear.

The tooth bending fatigue fracture is caused by the alternating loads for the heavy-duty transmission gears. The crack initiation and propagation are the two major parts in the failure process. The crack propagation behavior is mainly affected by initial crack position except for the load and material properties. In this paper, the crack propagation model of a gear is established under the considering of crack initiation location by using extended finite element method (XFEM). The model accuracy is verified by testing results of strain and fractography by conducting the single-tooth bending fatigue experiment. The influence of crack initiation locations on subsequent crack propagation behavior is analyzed. The crack length in the tooth width direction and depth direction is faster when the initial crack is located in the middle of root surface. The crack growth rate is lower for the initial crack located in the surface close to the end surface of the gear.

Spatially and temporally understanding dynamic solid-electrolyte interfaces in carbon dioxide electroreduction.

The ubiquity of solid-liquid interfaces in nature and the significant role of their atomic-scale structure in determining interfacial properties have led to intensive research. Particularly in electrocatalysis, however, a molecular-level picture that clearly describes the dynamic interfacial structures and organizations with their correlation to preferred reaction pathways in electrochemical reactions remains poorly understood. In this review, CO2 electroreduction reaction (CO2RR) is spatially and temporally understood as a result of intricate interactions at the interface, in which the interfacial features are highly relevant. We start with the discussion of current understandings and model development associated with the charged electrochemical interface as well as its dynamic landscape. We further highlight the interactive dynamics from the interfacial field, catalyst surface charges and various gradients in electrolyte and interfacial water structures at interfaces under CO2RR working conditions, with emphasis on the interfacial-structure dependence of catalytic reactivity/selectivity. Significantly, a probing energy-dependent "in situ characterization map" for dynamic interfaces based on various complementary in situ/operando techniques is proposed, aiming to present a comprehensive picture of interfacial electrocatalysis and to provide a more unified research framework. Moreover, recent milestones in both experimental and theoretical aspects to establish the correct profile of electrochemical interfaces are stressed. Finally, we present key scientific challenges with related perspectives toward future opportunities for this exciting frontier.

Multi-spectral snapshot diffraction-based overlay metrology.

Diffraction-based overlay (DBO) metrology has been successfully introduced to deal with the tighter overlay control in modern semiconductor manufacturing. Moreover, DBO metrology typically needs to be performed at multiple wavelengths to achieve accurate and robust measurement in the presence of overlay target deformations. In this Letter, we outline a proposal for multi-spectral DBO metrology based on the linear relation between the overlay errors and the combinations of off-diagonal-block Mueller matrix elements ΔM = Mij - ( - 1)jMji (i = 1, 2; j = 3, 4) associated with the zeroth-order diffraction of overlay target gratings. We propose an approach that can realize snapshot and direct measurement of ΔM over a broad spectral range without any rotating or active polarization component. The simulation results demonstrate the capability of the proposed method for multi-spectral overlay metrology in a single shot.

New Radical Route and Insight for the Highly Efficient Synthesis of Benzimidazoles Integrated with Hydrogen Evolution.

Benzimidazoles are a versatile class of scaffolds with important biological activities, whereas their synthesis in a lower-cost and more efficient manner remains a challenge. Here, we demonstrate a conceptually new radical route for the high-performance photoredox coupling of alcohols and diamines to synthesize benzimidazoles along with stoichiometric hydrogen (H2 ) over Pd-decorated ultrathin ZnO nanosheets (Pd/ZnO NSs). The mechanistic study reveals the unique advantage of ZnO NSs over other supports and particularly that the features of Pd nanoparticles in facilitating the cleavage of the α-C-H bond of alcohols and adsorbing subsequently-generated C-centered radicals hold the key to turning on the reaction. This work highlights a new insight into radical-induced efficient benzimidazole synthesis pairing with H2 evolution by rationally designing semiconductor-based photoredox systems.

Heterostructure-Engineered Semiconductor Quantum Dots toward Photocatalyzed-Redox Cooperative Coupling Reaction.

Semiconductor quantum dots have been emerging as one of the most ideal materials for artificial photosynthesis. Here, we report the assembled ZnS-CdS hybrid heterostructure for efficient coupling cooperative redox catalysis toward the oxidation of 1-phenylethanol to acetophenone/2,3-diphenyl-2,3-butanediol (pinacol) integrated with the reduction of protons to H2. The strong interaction and typical type-I band-position alignment between CdS quantum dots and ZnS quantum dots result in efficient separation and transfer of electron-hole pairs, thus distinctly enhancing the coupled photocatalyzed-redox activity and stability. The optimal ZnS-CdS hybrid also delivers a superior performance for various aromatic alcohol coupling photoredox reaction, and the ratio of electrons and holes consumed in such redox reaction is close to 1.0, indicating a high atom economy of cooperative coupling catalysis. In addition, by recycling the scattered light in the near field of a SiO2 sphere, the SiO2-supported ZnS-CdS (denoted as ZnS-CdS/SiO2) catalyst can further achieve a 3.5-fold higher yield than ZnS-CdS hybrid. Mechanistic research clarifies that the oxidation of 1-phenylethanol proceeds through the pivotal radical intermediates of •C(CH3)(OH)Ph. This work is expected to promote the rational design of semiconductor quantum dots-based heterostructured catalysts for coupling photoredox catalysis in organic synthesis and clean fuels production.

Exposed Zinc Sites on Hybrid ZnIn2 S4 @CdS Nanocages for Efficient Regioselective Photocatalytic Epoxide Alcoholysis.

Photocatalytic epoxide alcoholysis through C-O bond cleavage and formation has emerged as an alternative to synthesizing anti-tumoral pharmaceuticals and fine chemicals. However, the lack of crucial evidence to interpret the interaction between reactants and photocatalyst surface makes it challenging for photocatalytic epoxide alcoholysis with both high activity and regioselectivity. In this work, we report the hierarchical ZnIn2 S4 @CdS photocatalyst for epoxide alcoholysis with high regioselectivity nearly 100 %. Mechanistic studies unveil that the precise activation switch on exposed Zn acid sites for C-O bond polarization and cleavage has a critical significance for achieving efficient photocatalytic performance. Furthermore, the establishment of Z-scheme heterojunction facilitates the interface charge separation and transfer. Remarkably, the underlying regioselective photocatalytic reaction pathway has been distinctly revealed.

Engineering Semiconductor Quantum Dots for Selectivity Switch on High-Performance Heterogeneous Coupling Photosynthesis.

Semiconductor-based photoredox catalysis brings an innovative strategy for sustainable organic transformation (e.g., C-C/C-X bond formation), via radical coupling under mild conditions. However, since semiconductors interact with photogenerated radicals unselectively, the precise control of selectivity for such organic synthesis by steering radical conversion is extremely challenging. Here, by the judicious design of a structurally well-defined and atomically dispersed cocatalyst over semiconductor quantum dots, we demonstrate the precise selectivity switch on high-performance selective heterogeneous coupling photosynthesis of a C-C bond or a C-N bond along with hydrogen production over the Ni-oxo cluster and single Pd atom-decorated CdS quantum dots crafted onto the SiO2 support. Mechanistic studies unveil that the Ph(•CH)NH2 and PhCH2NH2•+ act as dominant radical intermediates for such divergent organic synthesis of C-C coupled vicinal diamines and C-N coupled imines, as respectively enabled by Ni-oxo clusters assisted radical-radical coupling and single Pd atom-assisted radical addition-elimination. This work overcomes the pervasive difficulties of selectivity regulation in semiconductor-based photochemical synthesis, highlighting a vista of utilizing atomically dispersed cocatalysts as active sites to maneuver unselective radical conversion by engineering quantum dots toward selective heterogeneous photosynthesis.

Embedded growth of colorful CsPbX3(X = Cl, Br, I) nanocrystals in metal-organic frameworks at Room Temperature.

Herein, we develop a novel strategy for preparing all-inorganic cesium lead halide (CsPbX3, X = Cl, Br, I) perovskite nanocrystals (NCs)@Zn-based metal-organic framework (MOF) composites through interfacial synthesis. The successful embedding of fluorescent perovskite NCs in Zn-MOFs is due to thein situconfined growth, which is attributed to the re-nucleation of water-triggered phase transformation from Cs4PbBr6to CsPbBr3. The controllable synthesis of mixed-halide based composites with various emission wavelength can be achieved by adding the desired amount of halide (Cl or I) salts in the re-nucleation process. More importantly, the anion exchange reaction is inhibited among various composites with different halogen atoms by being trapped in MOFs. Besides, a white light-emitting diode (WLED) is produced using a blue LED chip with the green-emitting and red-emitting composites, which has a color coordinate of (0.3291, 0.3272) and a wide color gamut. This work provides a novel route to achieving perovskite NCs growth in MOFs, which also can be extended to the other NCs embedded in frames as well.

Nanoscale Assembly of CdS/BiVO4 Hybrids for Coupling Selective Fine Chemical Synthesis and Hydrogen Production under Visible Light.

Simultaneously utilizing photogenerated electrons and holes in one photocatalytic system to synthesize value-added chemicals and clean hydrogen (H2) energy meets the development requirements of green chemistry. Herein, we report a binary material of CdS/BiVO4 combining one-dimensional (1D) CdS nanorods (NRs) with two-dimensional (2D) BiVO4 nanosheets (NSs) constructed through a facile electrostatic self-assembly procedure for the selectively photocatalytic oxidation of aromatic alcohols integrated with H2 production, which exhibits significantly enhanced photocatalytic performance. Within 2 h, the conversion of aromatic alcohols over CdS/BiVO4-25 was approximately 9-fold and 40-fold higher than that over pure CdS and BiVO4, respectively. The remarkably improved photoactivity of CdS/BiVO4 hybrids is mainly ascribed to the Z-scheme charge separation mechanism in the 1D/2D heterostructure derived from the interface contact between CdS and BiVO4, which not only facilitates the separation and transfer of charge carriers, but also maintains the strong reducibility of photogenerated electrons and strong oxidizability of photogenerated holes. It is anticipated that this work will further stimulate interest in the rational design of 1D/2D Z-scheme heterostructure photocatalysts for the selective fine chemical synthesis integrated with H2 evolution.

Downregulation of microRNA-21 contributes to decreased collagen expression in venous malformations via transforming growth factor-ß/Smad3/microRNA-21 signaling feedback loop.

OBJECTIVE: Venous malformations (VMs) are the most frequent vascular malformations and are characterized by dilated and tortuous veins with a dysregulated vascular extracellular matrix. The purpose of the present study was to investigate the potential involvement of microRNA-21 (miR-21), a multifunctional microRNA tightly associated with extracellular matrix regulation, in the pathogenesis of VMs. METHODS: The expression of miR-21, collagen I, III, and IV, transforming growth factor-ß (TGF-ß), and Smad3 (mothers against decapentaplegic homolog 3) was evaluated in VMs and normal skin tissue using in situ hybridization, immunohistochemistry, Masson trichrome staining, and real-time polymerase chain reaction. Human umbilical vein endothelial cells (HUVECs) were used to explore the underlying mechanisms. RESULTS: miR-21 expression was markedly decreased in the VM specimens compared with normal skin, in parallel with downregulation of collagen I, III, and IV and the TGF-ß/Smad3 pathway in VMs. Moreover, our data demonstrated that miR-21 positively regulated the expression of collagens in HUVECs and showed a positive association with the TGF-ß/Smad3 pathway in the VM tissues. In addition, miR-21 was found to mediate TGF-ß-induced upregulation of collagens in HUVECs. Our data have indicated that miR-21 and the TGF-ß/Smad3 pathway could form a positive feedback loop to synergistically regulate endothelial collagen synthesis. In addition, TGF-ß/Smad3/miR-21 feedback loop signaling was upregulated in bleomycin-treated HUVECs and VM specimens, which was accompanied by increased collagen deposition. CONCLUSIONS: To the best of our knowledge, the present study has, for the first time, revealed downregulation of miR-21 in VMs, which might contribute to decreased collagen expression via the TGF-ß/Smad3/miR-21 signaling feedback loop. These findings provide new information on the pathogenesis of VMs and might facilitate the development of new therapies for VMs.

Cooperative Coupling of Oxidative Organic Synthesis and Hydrogen Production over Semiconductor-Based Photocatalysts.

Merging hydrogen (H2) evolution with oxidative organic synthesis in a semiconductor-mediated photoredox reaction is extremely attractive because the clean H2 fuel and high-value chemicals can be coproduced under mild conditions using light as the sole energy input. Following this dual-functional photocatalytic strategy, a dreamlike reaction pathway for constructing C-C/C-X (X = C, N, O, S) bonds from abundant and readily available X-H bond-containing compounds with concomitant release of H2 can be readily fulfilled without the need of external chemical reagents, thus offering a green and fascinating organic synthetic strategy. In this review, we begin by presenting a concise overview on the general background of traditional photocatalytic H2 production and then focus on the fundamental principles of cooperative photoredox coupling of selective organic synthesis and H2 production by simultaneous utilization of photoexcited electrons and holes over semiconductor-based catalysts to meet the economic and sustainability goal. Thereafter, we put dedicated emphasis on recent key progress of cooperative photoredox coupling of H2 production and various selective organic transformations, including selective alcohol oxidation, selective methane conversion, amines oxidative coupling, oxidative cross-coupling, cyclic alkanes dehydrogenation, reforming of lignocellulosic biomass, and so on. Finally, the remaining challenges and future perspectives in this flourishing area have been critically discussed. It is anticipated that this review will provide enlightening guidance on the rational design of such dual-functional photoredox reaction system, thereby stimulating the development of economical and environmentally benign solar fuel generation and organic synthesis of value-added fine chemicals.

Nanostructured metal phosphides: from controllable synthesis to sustainable catalysis.

Metal phosphides (MPs) with unique and desirable physicochemical properties provide promising potential in practical applications, such as the catalysis, gas/humidity sensor, environmental remediation, and energy storage fields, especially for transition metal phosphides (TMPs) and MPs consisting of group IIIA and IVA metal elements. Most studies, however, on the synthesis of MP nanomaterials still face intractable challenges, encompassing the need for a more thorough understanding of the growth mechanism, strategies for large-scale synthesis of targeted high-quality MPs, and practical achievement of functional applications. This review aims at providing a comprehensive update on the controllable synthetic strategies for MPs from various metal sources. Additionally, different passivation strategies for engineering the structural and electronic properties of MP nanostructures are scrutinized. Then, we showcase the implementable applications of MP-based materials in emerging sustainable catalytic fields including electrocatalysis, photocatalysis, mild thermocatalysis, and related hybrid systems. Finally, we offer a rational perspective on future opportunities and remaining challenges for the development of MPs in the materials science and sustainable catalysis fields.

Coupling Strategy for CO2 Valorization Integrated with Organic Synthesis by Heterogeneous Photocatalysis.

Photocatalytic reduction of CO2 to solar fuels and/or fine chemicals is a promising way to increase the energy supply and reduce greenhouse gas emissions. However, the conventional reaction system for CO2 photoreduction with pure H2 O or sacrificial agents usually suffers from low catalytic efficiency, poor stability, or cost-ineffective atom economy. A recent surge of developments, in which photocatalytic CO2 valorization is integrated with selective organic synthesis into one reaction system, indicates an efficient modus operandi that enables sufficient utilization of photogenerated electrons and holes to achieve the goals for sustainable economic and social development. In this Review we discuss current advances in cooperative photoredox reaction systems that integrate CO2 valorization with organics upgrading based on heterogeneous photocatalysis. The applications and virtues of this strategy and the underlying reaction mechanisms are discussed. The ongoing challenges and prospects in this area are critically discussed.

Molecular Understanding of Electrochemical-Mechanical Responses in Carbon-Coated Silicon Nanotubes during Lithiation.

Carbon-coated silicon nanotube (SiNT@CNT) anodes show tremendous potential in high-performance lithium ion batteries (LIBs). Unfortunately, to realize the commercial application, it is still required to further optimize the structural design for better durability and safety. Here, the electrochemical and mechanical evolution in lithiated SiNT@CNT nanohybrids are investigated using large-scale atomistic simulations. More importantly, the lithiation responses of SiNW@CNT nanohybrids are also investigated in the same simulation conditions as references. The simulations quantitatively reveal that the inner hole of the SiNT alleviates the compressive stress concentration between a-LixSi and C phases, resulting in the SiNT@CNT having a higher Li capacity and faster lithiation rate than SiNW@CNT. The contact mode significantly regulates the stress distribution at the inner hole surface, further affecting the morphological evolution and structural stability. The inner hole of bare SiNT shows good structural stability due to no stress concentration, while that of concentric SiNT@CNT undergoes dramatic shrinkage due to compressive stress concentration, and that of eccentric SiNT@CNT is deformed due to the mismatch of stress distribution. These findings not only enrich the atomic understanding of the electrochemical-mechanical coupled mechanism in lithiated SiNT@CNT nanohybrids but also provide feasible solutions to optimize the charging strategy and tune the nanostructure of SiNT-based electrode materials.

Cooperative Syngas Production and C-N Bond Formation in One Photoredox Cycle.

Solar-driven syngas production by CO2 reduction provides a sustainable strategy to produce renewable feedstocks. However, this promising reaction often suffers from tough CO2 activation, sluggish oxidative half-reaction kinetics and undesired by-products. Herein, we report a function-oriented strategy of deliberately constructing black phosphorus quantum dots-ZnIn2 S4 (BP/ZIS) heterostructures for solar-driven CO2 reduction to syngas, paired with selectively oxidative C-N bond formation, in one redox cycle. The optimal BP/ZIS heterostructure features the enhanced charge-carrier separation and enriched active sites for cooperatively photocatalytic syngas production with a tunable ratio of CO/H2 and efficient oxidation of amines to imines with high conversion and selectivity. This prominent catalytic performance arises from the efficient electronic coupling between black phosphorus quantum dots and ZnIn2 S4 , as well as the optimized adsorption strength for key reaction intermediates, as supported by both experimental and theoretical investigations. We also demonstrate a synergistic interplay between CO2 reduction and amine dehydrogenation oxidation, rather than simply collecting these two single half-reactions in this dual-functional photoredox system.

Roles of Graphene Oxide in Heterogeneous Photocatalysis.

Graphene oxide (GO) has been widely utilized as the precursor of graphene (GR) to fabricate GR-based hybrid photocatalysts for solar-to-chemical energy conversion. However, until now, the properties and roles that GO played in heterogeneous photocatalysis have remained relatively elusive. In this Review, we start with a brief discussion of synthesis and structure of GO. Then, the photocatalysis-related properties of GO, including electrical conductivity, surface chemistry, dispersibility, and semiconductor properties, are concisely summarized. In particular, we have highlighted the fundamental multifaceted roles of GO in heterogeneous photocatalysis, which contain the precursor of GR, cross-linked framework for constructing aerogel photocatalyst, macromolecular surfactant, two-dimensional growth template, and photocatalyst by itself. Furthermore, the future prospects and remaining challenges on developing effective GO-derived hybrid photocatalysts are presented, which is expected to inspire further research into this promising research domain.

Rationally designed transition metal hydroxide nanosheet arrays on graphene for artificial CO2 reduction.

The performance of transition metal hydroxides, as cocatalysts for CO2 photoreduction, is significantly limited by their inherent weaknesses of poor conductivity and stacked structure. Herein, we report the rational assembly of a series of transition metal hydroxides on graphene to act as a cocatalyst ensemble for efficient CO2 photoreduction. In particular, with the Ru-dye as visible light photosensitizer, hierarchical Ni(OH)2 nanosheet arrays-graphene (Ni(OH)2-GR) composites exhibit superior photoactivity and selectivity, which remarkably surpass other counterparts and most of analogous hybrid photocatalyst system. The origin of such superior performance of Ni(OH)2-GR is attributed to its appropriate synergy on the enhanced adsorption of CO2, increased active sites for CO2 reduction and improved charge carriers separation/transfer. This work is anticipated to spur rationally designing efficient earth-abundant transition metal hydroxides-based cocatalysts on graphene and other two-dimension platforms for artificial reduction of CO2 to solar chemicals and fuels.