Morphological differences between the first and second maxillary premolar crowns: A three-dimensional surface homologous modeling analysis.

OBJECTIVES: The current study used a three-dimensional (3D) surface homologous modeling to analyze the structure of maxillary first premolar (P1) and second premolar (P2) crowns, to identify any morphological differences between them, particularly in their cuspal structures. METHODS: The study sample comprised 27 male elementary and junior high school students from Chiba Prefecture, Japan. Plaster casts were collected and the 3D coordinates were used to measure the crown structures. Thereafter, principal component (PC) analysis was carried out using the 3D coordinates of the homologous models, containing 4498 anatomical data points, including 9 landmarks. RESULTS: The findings indicated that P1 was significantly larger than P2, despite both teeth exhibiting similar intercuspal distances. The homologous model analysis revealed that 61.5 % of the total variance could be explained up to the fourth PC. Overall size and shape in the mesiodistal and buccolingual directions were estimated using PC1 and PC2, respectively. Both components highlighted a shape factor, indicating that the buccal cusp was more well-developed than the lingual cusp in P1 compared to P2. CONCLUSIONS: The variations in the size of the mesial and distal premolar teeth and the relationships between the cusps in the completed tooth crowns can be explained using molecular biology developmental models.

Global patterns of the cranial form of modern human populations described by analysis of a 3D surface homologous model.

This study assessed the regional diversity of the human cranial form by using geometric homologous models based on scanned data from 148 ethnic groups worldwide. This method adopted a template-fitting technique for a nonrigid transformation via the iterative closest point algorithm to generate the homologous meshes. Through the application of principal component analysis to 342 sampled homologous models, the largest variation was detected in overall size, and small South Asian crania were clearly verified. The next greatest diversity was found in the length/breadth proportion of the neurocranium, which showed the contrast between the elongated crania of Africans and the globular crania of Northeast Asians. Notably, this component was slightly correlated with the facial profile. Well-known facial features, such as the forward projection of the cheek among Northeast Asians and compaction of the European maxilla, were reconfirmed. These facial variations were highly correlated with the calvarial outline, particularly the degree of frontal and occipital inclines. An allometric pattern was detected in facial proportions in relation to overall cranial size; in larger crania, the facial profiles tend to be longer and narrower, as demonstrated among many American natives and Northeast Asians. Although our study did not include data on environmental variables that are likely to affect cranial morphology, such as climate or dietary conditions, the large datasets of homologous cranial models will be usefully available for seeking various attributions to phenotypic skeletal characteristics.

Three dimensional surface analyses of pubic symphyseal faces of contemporary Japanese reconstructed with 3D digitized scanner.

Three dimensional pubic bone images were analyzed to quantify some age-dependent morphological changes of the symphyseal faces of contemporary Japanese residents. The images were synthesized from 145 bone specimens with 3D measuring device. Phases of Suchey-Brooks system were determined on the 3D pubic symphyseal images without discrepancy from those carried out on the real bones because of the high fidelity. Subsequently, mean curvatures of the pubic symphyseal faces to examine concavo-convex condition of the surfaces were analyzed on the 3D images. Average values of absolute mean curvatures of phase 1 and 2 groups were higher than those of phase 3-6 ones, whereas the values were approximately constant over phase 3 presumably reflecting the inactivation of pubic faces over phase 3. Ratio of the concave areas increased gradually with progressing phase or age classes, although convex areas were predominant in every phase.

Analyses of sexual dimorphism of reconstructed pelvic computed tomography images of contemporary Japanese using curvature of the greater sciatic notch, pubic arch and greater pelvis.

Three-dimensional pelvic images were reconstructed from multi-slice CT data of contemporary Japanese (males: 124; females: 104, 25-92 years old), and curvature analysis to examine sexual dimorphism was carried out in the great sciatic notch (GSN), the pubic arch and the greater pelvis in the images. Reconstructed pelvic CT images were visualized fairly well and anatomical landmarks were easily recognizable. When calculating the radii (curvature radii) of the best-fit circles for the spline curve lines set along the edges of the GSNs and of the pubic arches, sexes from these regions were correctly identified in 89.1% (males: 93.8%; females: 83.7%) and 94.7% (males: 97.3%; females: 91.8%) of cases, respectively, by setting an appropriate cut-off value. Furthermore, sexing was possible even in deeper regions of the GSN which are relatively resistant to postmortem damage. Curvature radii of the best-fit spheres of greater pelves showed no significant difference between sexes. However, curvature of the best-fit sphere for the left iliac fossa was significantly larger than that of the right one (p<10(-24)) in males, and the ratios were >1.0 in 88% of all male specimens analyzed. Meanwhile, no significant difference was observed among female samples. Although some left-sided dominancy has been reported in 2-dimensional measurements of the human pelvis, this 3-dimensional laterality in males was much more significant, and is a potential index of sex difference.

Application of computerised correction method for optical distortion of two-dimensional facial image in superimposition between three-dimensional and two-dimensional facial images.

The applicability of computerised correction of optical distortion to two-dimensional (2D)/three-dimensional (3D) facial image superimposition was investigated. Two-dimensional (2D) facial images of 10 male volunteers were taken with a commercially available closed circuit device (CCD) camera (reference camera) at four areas of the lens field: the centre, top, upper right and right. Correction was made by computer by calculating differences vis-à-vis the co-ordinates of dots on a test chart. Discrepancies in facial outlines between the 3D and 2D images decreased following correction in all lens fields and were below the threshold for true positive. The correction method was also tested using an actual surveillance camera and video recorder installed in a bank. The method was found to be effective for the correction of facial images, especially those taken in the top and right lens fields. Since the total error (observed error) remaining after correction appeared close to the random error (real error), systematic error was thought to be minimised by correction. Therefore, the present method was thought to display high fidelity, and could be useful for supplementary examination of conventional superimposition.

Analyses of sexual dimorphism of contemporary Japanese using reconstructed three-dimensional CT images--curvature of the best-fit circle of the greater sciatic notch.

We examined various expression methods of sexual dimorphism of the greater sciatic notch (GSN) of the pelvis in contemporary Japanese residents by analyzing the three-dimensional (3D) images reconstructed by multi-slice computed tomography (CT) data, using image-processing and measurement software. Mean error of anthropological measurement values between two skeletonized pelves and their reconstructed 3D-CT images was 1.4%. A spline curve was set along the edge of the GSN of reconstructed pelvic 3D-CT images. Then a best-fit circle for subsets of the spline curve, 5-60mm in length and passing through the deepest point (inflection point) of the GSN, was created, and the radius of the circle (curvature radius) and its ratio to the maximum pelvic height (curvature quotient) were computed. In analysis of images reconstructed from CT data of 180 individuals (male: 91, female: 89), sexes were correctly identified in with 89.4% of specimens, with a spline curve length of 60mm. Because sexing was possible even in deeper regions of the GSN, which are relatively resistant to postmortem damage, the present method may be useful for practical forensic investigation.

A new retrieval system for a database of 3D facial images.

A new retrieval system for a 3D facial image database was designed and its reliability was experimentally examined. This system has two steps, firstly to automatically adjust the orientation of all 3D facial images in a database to that of the 2D facial image of a target person, and then to identify the facial image of the target person from the adjusted 3D facial images in the database using a graph-matching method. From the experimental study [M. Yoshino, K. Imaizumi, T. Tanijiri, J.G. Clement, Automatic adjustment of facial orientation in 3D face image database, Jpn. J. Sci. Tech. Iden. 8 (2003) 41-47], it is concluded that the software developed for the first step will be applicable to the automatic adjustment of facial orientation in the 3D facial image database. In 28 out of 110 sets (25.5%), the 3D image of the target person was chosen as the best match (from a database of 132 3D facial images) according to the similarity of the facial image characteristics based on the graph matching. The 3D facial image of the target person was ranked in the top of 10 of the database in 75 out of 110 sets (68.2%). These results suggest that this system is inadequate for the identification level, but may be feasible for screening method in a small database. It will be necessary to further pursue the possibility of realization of a facial image retrieval system for a large database such as suspects' facial images in future.

A three-dimensional analysis of enamel distribution patterns in human permanent first molars.

The morphology of the enamel cap and the thickness of the enamel of human molars are regarded as closely related to function. Previously, enamel thickness has been studied in specific sections only, not the distribution patterns of the entire crown. Here, the three-dimensional distribution pattern of the enamel of human permanent first molars was examined with a newly developed system. A distinctive pattern of enamel thickness common to all the individuals examined was found, regardless of the variation in absolute enamel thickness among individuals. It was confirmed that the lingual faces of upper molars and the buccal faces of lower molars have thicker enamel than the other crown faces. Moreover, in lower molars, enamel was significantly thicker at the hypoconid than at the protoconid crown face. The distal face tended to exhibit thicker enamel than either mesial or lingual faces, owing to the thicker hypoconulid enamel. It is suggested that the gradients of thickness within a molar are not necessarily manifested according to direction, but are the result of cusp-specific patterning. The distribution of enamel in the occlusal fovea was found to correspond to the morphology of the outer enamel surface, with the exception of the distinctly thin enamel at and near the tip of the mesiobuccal cusps in both upper and lower molars. The thickness of the enamel in that region might therefore be related to developmental timing or the topography of the enamel-dentine junction, rather than to functional demand. When viewed from a whole-crown, three-dimensional perspective, enamel thickness patterns are in part, but not entirely, explained as an adaptation to functional demand.