ABSTRACT
An Addendum to the AAPM's TG-51 protocol for the determination of absorbed dose to water is presented for electron beams with energies between 4 MeV and 22 MeV ( 1.70 cm ≤ R 50 ≤ 8.70 cm $1.70\nobreakspace {\rm cm} \le R_{\text{50}} \le 8.70\nobreakspace {\rm cm}$ ). This updated formalism allows simplified calibration procedures, including the use of calibrated cylindrical ionization chambers in all electron beams without the use of a gradient correction. New k Q $k_{Q}$ data are provided for electron beams based on Monte Carlo simulations. Implementation guidance is provided. Components of the uncertainty budget in determining absorbed dose to water at the reference depth are discussed. Specifications for a reference-class chamber in electron beams include chamber stability, settling, ion recombination behavior, and polarity dependence. Progress in electron beam reference dosimetry is reviewed. Although this report introduces some major changes (e.g., gradient corrections are implicitly included in the electron beam quality conversion factors), they serve to simplify the calibration procedure. Results for absorbed dose per linac monitor unit are expected to be up to approximately 2 % higher using this Addendum compared to using the original TG-51 protocol.
ABSTRACT
Practical guidelines that are not explicit in the TG-51 protocol and its Addendum for photon beam dosimetry are presented for the implementation of the TG-51 protocol for reference dosimetry of external high-energy photon and electron beams. These guidelines pertain to: (i) measurement of depth-ionization curves required to obtain beam quality specifiers for the selection of beam quality conversion factors, (ii) considerations for the dosimetry system and specifications of a reference-class ionization chamber, (iii) commissioning a dosimetry system and frequency of measurements, (iv) positioning/aligning the water tank and ionization chamber for depth ionization and reference dose measurements, (v) requirements for ancillary equipment needed to measure charge (triaxial cables and electrometers) and to correct for environmental conditions, and (vi) translation from dose at the reference depth to that at the depth required by the treatment planning system. Procedures are identified to achieve the most accurate results (errors up to 8% have been observed) and, where applicable, a commonly used simplified procedure is described and the impact on reference dosimetry measurements is discussed so that the medical physicist can be informed on where to allocate resources.
ABSTRACT
The Canadian Organization of Medical Physicists (COMP), in close partnership with the Canadian Partnership for Quality Radiotherapy (CPQR) has developed a series of Technical Quality Control (TQC) guidelines for radiation treatment equipment. These guidelines outline the performance objectives that equipment should meet in order to ensure an acceptable level of radiation treatment quality. The TQC guidelines have been rigorously reviewed and field tested in a variety of Canadian radiation treatment facilities. The development process enables rapid review and update to keep the guidelines current with changes in technology. This announcement provides an introduction to the guidelines, describing their scope and how they should be interpreted. Details of recommended tests can be found in separate, equipment specific TQC guidelines published in the JACMP (COMP Reports), or the website of the Canadian Partnership for Quality Radiotherapy (www.cpqr.ca).
Subject(s)
Health Physics , Medical Errors/prevention & control , Practice Guidelines as Topic/standards , Quality Control , Radiation Oncology/organization & administration , Radiation Oncology/standards , Research Report , Canada , HumansABSTRACT
A close partnership between the Canadian Partnership for Quality Radiotherapy (CPQR) and the Canadian Organization of Medical Physicist's (COMP) Quality Assurance and Radiation Safety Advisory Committee (QARSAC) has resulted in the development of a suite of Technical Quality Control (TQC) guidelines for radiation treatment equipment; they outline specific performance objectives and criteria that equipment should meet in order to assure an acceptable level of radiation treatment quality. The adopted framework for the development and maintenance of the TQCs ensures the guidelines incorporate input from the medical physics com-munity during development, measures the workload required to perform the QC tests outlined in each TQC, and remain relevant (i.e., "living documents") through subsequent planned reviews and updates. The framework includes consolidation of existing guidelines and/or literature by expert reviewers, structured stages of public review, external field-testing, and ratification by COMP. This TQC develop-ment framework is a cross-country initiative that allows for rapid development of robust, community-driven living guideline documents that are owned by the com-munity and reviewed to keep relevant in a rapidly evolving technical environment. Community engagement and uptake survey data shows 70% of Canadian centers are part of this process and that the data in the guideline documents reflect, and are influencing, the way Canadian radiation treatment centers run their technical quality control programs. For a medium-sized center comprising six linear accelerators and a comprehensive brachytherapy program, we evaluate the physics workload to 1.5 full-time equivalent physicists per year to complete all QC tests listed in this suite.
