Paper-based immunosensor with signal amplification by enzyme-labeled anti-p16INK4a multifunctionalized gold nanoparticles for cervical cancer screening.

The aim of this study was to develop a paper-based immunosensor for cervical cancer screening, with signal amplification by multifunctionalized gold nanoparticles (AuNPs). The AuNPs were functionalized with a highly specific antibody to the p16INK4a cancer biomarker. The signal was amplified using a combination of the peroxidase activity of horseradish peroxidase (HRP) enzyme-antibody conjugate and the peroxidase-like activity of the AuNPs. The immune complex of p16INK4a protein and multifunctionalized AuNPs was deposited on the nitrocellulose membrane, and a positive result was generated by catalytic oxidation of peroxidase enzyme substrate 3,3',5,5'-Tetramethylbenzidine (TMB). The entire reaction occurred on the membrane within 30 min. Evaluation in clinical samples revealed 85.2% accuracy with a kappa coefficient of 0.69. This proof of concept study demonstrates the successful development of a highly accurate, paper-based immunosensor that is easy to interpret using the naked eye and that is suitable for cervical cancer screening in low-resource settings.

Production, characterization, and in vitro effects of a novel monoclonal antibody against Mig-7.

Development of new cancer therapies based on specific recognition of molecules in cancer cells is a significant challenge, as this requires identification of such molecules (molecular targets) and subsequent development of high-affinity, selective binders (targeting molecules). While several molecular targets for cancer therapies are currently under evaluation in clinical trials, greater selectivity for cancer cells over normal cells is required to enhance efficacy. Migration-inducing gene 7 (Mig-7), a membrane protein found in various types of carcinoma cells, is a cancer-specific biomarker and a promising molecular target for targeted cancer therapies. The purpose of this study was to produce and characterize a novel monoclonal antibody (mAb) raised against an N-terminal peptide of human Mig-7 (Mig-7(1-30)). The Mig-7(1-30) peptide was conjugated with a KLH carrier protein for immunization, and the mAb specific to Mig-7 (STmAb-1) was produced using hybridoma technology. Western blot analysis showed that STmAb-1 specifically reacted with a 23-kDa Mig-7 protein expressed in cancer cell lines, and, crucially, not with primary human fibroblasts. The affinity constant (Kaff) of STmAb-1, as measured by non-competitive enzyme immunoassay, was 1.31 × 10(9) M(-1), indicating high mAb affinity against Mig-7. Immunofluorescence assays demonstrated that STmAb-1 could specifically recognize Mig-7 expressed in cancer cell lines, but not in primary human fibroblasts and keratinocytes. Moreover, STmAb-1 inhibited the growth of MCF7 and HeLa cell lines in contrast to primary human fibroblasts, highlighting its potential usefulness in the development of new cancer therapeutics.

Modified NLC-loaded coumarin for pharmaceutical applications: the improvement of physical stability and controlled release profile.

BACKGROUND: Coumarin-6 is a lipophilic dye and is often used as a model in delivery system. OBJECTIVE: The aim of this study was to improve the nonstructured lipid carrier (NLC) system loading with lipophilic molecule, coumarin-6, and to investigate its characteristics in terms of physical stability and controlled release profile. MATERIALS AND METHODS: Initially, the selection of the coating polymer was observed. Then, the preparation of the conventional NLC-loaded coumarin-6 was compared to the modified NLC-loaded coumarin-6 via the probe sonication. The physical properties and stability were determined by Fourier transform infrared spectroscopy (FT-IR), differential scanning calorimetry (DSC) and X-ray diffraction (XRD) techniques. The release profile was established using fluorescent spectroscopic method. RESULTS AND DISCUSSION: The size and zeta potential measurement showed significant decrease in the size range of the modified NLC-loaded coumarin and the lower intensity of the surface charge compared to the NLC-loaded coumarin. The change of crystallinity observed from DSC and XRD techniques indicated the molecular dispersion of coumarin-6 in the lipid matrix of NLC. The FT-IR spectra were also proven that coumarin-6 was entrapped in the NLC molecule. The result showed comparable controlled release profile to the conventional preparation with no difference on the cytotoxicity level. CONCLUSIONS: The modified NLC delivery system, therefore, exhibited the acceptable potential as a nanocarrier.

Ultrasensitive electrochemical immunosensor based on dual signal amplification process for p16(INK4a) cervical cancer detection in clinical samples.

The p16(INK4a) (p16) is a cyclin-dependent kinase inhibitor, which has been evaluated in several studies as a diagnostic marker of cervical cancer. Immunostaining using p16 specific antibody has confirmed an over-expression of p16 protein in cervical cancer cells and its association with disease progression. This article reports an ultrasensitive electrochemical immunosensor for specific detection of p16 and demonstrates its performance for detection of solubilized p16 protein in cell lysates obtained from patients. Sandwich-based immunoreaction couple with double signal amplification strategy based on catalytic enlargement of particle tag was used for high sensitivity and specificity. The conditions were optimized to create an immunoassay protocol. Disposable screen-printed electrode modified with capture antibodies (Ab1) was selected for further implementation towards point-of-care diagnostics. Small gold nanoparticles (15 nm diameter) conjugated with detection antibodies (Ab2) were found to better serve as a detection label due to limited interference with antigen-antibody interaction. Double signal enhancement was performed by sequential depositions of gold and silver layers. This gave the sensitivity of 1.78 µA mL(ng GST-p16)(-1) cm(-2) and detection limit of 1.3 ng mL(-1) for GST-p16 protein which is equivalent to 0.49 ng mL(-1) for p16 protein and 28 cells for HeLa cervical cancer cells. In addition to purified protein, the proposed immunosensor effectively detected elevated p16 level in cervical swab samples obtained from 10 patients with positive result from standard Pap smear test, indicating that an electrochemical immunosensors hold an excellent promise for detection of cervical cancer in clinical setting.

Solution- and solid-state NMR studies of GPCRs and their ligands.

G protein-coupled receptors (GPCRs) represent one of the major targets of new drugs on the market given their roles as key membrane receptors in many cellular signalling pathways. Structure-based drug design has potential to be the most reliable method for novel drug discovery. Unfortunately, GPCR-ligand crystallisation for X-ray diffraction studies is very difficult to achieve. However, solution- and solid-state NMR approaches have been developed and have provided new insights, particularly focussing on the study of protein-ligand interactions which are vital for drug discovery. This review provides an introduction for new investigators of GPCRs/ligand interactions using NMR spectroscopy. The guidelines for choosing a system for efficient isotope labelling of GPCRs and their ligands for NMR studies will be presented, along with an overview of the different sample environments suitable for generation of high resolution structural information from NMR spectra.

Heterologous high yield expression and purification of neurotensin and its functional fragment in Escherichia coli.

Peptide synthesis is widely used for the production of small proteins and peptides, but producing uniformly isotopically labelled peptides for NMR and other biophysical studies could be limited for economic reasons. Here, we propose a use of a modified pGEV-1 plasmid to express neurotensin (NT(1-13)), pGlu(1)-Leu(2)-Tyr(3)-Glu(4)-Asn(5)-Lys(6)-Pro(7)-Arg(8)-Arg(9)-Pro(10)-Tyr(11)-Ile(12)-Leu(13)-OH, as a C-terminal fusion protein with the GB1 domain of streptococcal protein G. The free carboxyl-terminus is important for the function of several peptide hormones, including neurotensin. Therefore, for the pGEV-NT(1-13) construct, the C-terminal pGEV-encoded 6xHis tag was removed and an N-terminal 8xHis tag was introduced for affinity purification. To facilitate removal of tags using CNBr cleavage, a methionine was introduced at the N-terminal of the peptide. Furthermore, this pGEV-NT(1-13) plasmid was used as a template to include a Pro-7 to Met mutation for CNBr cleavage, giving NT(8-13), the sub-fragment crucial for the biological activity of this peptide. These two constructs are being used to produce uniformly labelled NT(1-13) and NT(8-13) in high yield and in a cost effective way, using cheap (15)N and/or (13)C source. The modification proposed here using the pGEV-1 plasmid could be an alternative option for the high expression of other isotopically labelled and unlabelled short peptides, including hormones and hydrophobic membrane peptides.

Enantioselective syntheses of alpha-Fmoc-Pbf-[2-(13)C]-L-arginine and Fmoc-[1,3-(13)C2]-L-proline and Incorporation into the neurotensin receptor 1 ligand, NT(8-13).

Enantioselective syntheses of selectively labeled, orthogonally protected [2-(13)C]-L-arginine and [1,3-(13)C(2)]-L-proline are described from the commercially available precursors [2-(13)C]bromoacetic acid and potassium [(13)C]cyanide. Interestingly the enhanced signal assigned to C-2 in the (13)C NMR spectrum of alpha-Fmoc-Pbf-[2-(13)C]-L-arginine was very broad at room temperature. The two Fmoc-labeled amino acids were used to prepare [2-(13)C]-Arg9 and [1,3-(13)C(2)]-Pro10 labeled ligand (NT(8-13)) by manual Fmoc-SPSS.

Structural requirements of the unique disulphide bond and the proline-rich motif within the alpha4-alpha5 loop for larvicidal activity of the Bacillus thuringiensis Cry4Aa delta-endotoxin.

Both the disulphide bond (Cys192-Cys199) and the proline-rich motif (Pro193ProAsnPro196) in the long loop connecting the alpha4-alpha5 transmembrane hairpin of the Cry4Aa mosquito-larvicidal protein have been found to be unique among the Bacillus thuringiensis Cry delta-endotoxins. In this study, their structural requirements for larvicidal activity of the Cry4Aa toxin were investigated. C192A and C199A mutant toxins were initially generated and over-expressed in Escherichia coli cells as 130-kDa protoxins at levels comparable to that of the wild-type toxin. When their activities against Aedes aegypti larvae were determined, Escherichia coli cells expressing each mutant toxin retained the high-level toxicity. Further mutagenic analysis of the PPNP motif revealed that an almost complete loss in larvicidal activity was observed for the C199A/P193A double mutant, whereas a small reduction in toxicity was shown for the C199A/P194A and C199A/P196A mutants. Increasing the flexibility of the alpha4-alpha5 loop through C199A/P193G, C199A/P194G/P196A, C199A/P194A/P196G, and C199A/P194G/P196G mutations significantly decreased the larvicidal activity. Similar to the wild-type protoxin, all mutant toxins were structurally stable upon solubilisation and trypsin activation in carbonate buffer, pH 9.0. These findings are the first biological evidence for a structural function in larvicidal activity of the unique disulphide bridge as well as the proline-rich motif within the alpha4-alpha5 loop of the Cry4Aa toxin.